Public bug reported:
I just upgraded the Ubuntu do gutsy and it seems to update the kernel of the
linux.
When I try to boot the image initrd.img-2.6.22-14-generic it starts booting
gives the error:
PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 0000:01:00.0
After this, the monitor losts the signal and the PC seems continues
booting (mounting floppy disk for example). The monitor do not turn on
again on the bootup process.
I tried to restart and boot from the image initrd.img-2.6.20-16-generic.
The same error occur, the monitor losts the signal, but after it returns again
and I am able to work normally.
I do not know how can I get tracks of the error occurred with image
initrd.img-2.6.22-14-generic. If you could tell me how to get the erros
on this case, please tell me.
I have a Geforce 8500 GT and a motherboard DP965LTCK. I guess taht the
errot PCI failed to allocate memory resource is related to these
hardwares like in bootput process the system try to allocate memory for
the Video Card with 512MB but this have just 256MB.
There is the dmesg content booting from image 2.6.20-16-generic
--------------------------------------------------------------------------------------
[ 0.000000] Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Sep 23 18:31:23 UTC 2007 (Ubuntu
2.6.20-16.32-generic)
[ 0.000000] Command line: root=UUID=bbd06a81-5262-4c9e-afc2-d4bd15cd2def ro
quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007edaa000 (usable)
[ 0.000000] BIOS-e820: 000000007edaa000 - 000000007edb7000 (reserved)
[ 0.000000] BIOS-e820: 000000007edb7000 - 000000007ee3b000 (usable)
[ 0.000000] BIOS-e820: 000000007ee3b000 - 000000007eee9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eee9000 - 000000007eeed000 (usable)
[ 0.000000] BIOS-e820: 000000007eeed000 - 000000007eef2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eef2000 - 000000007eef3000 (usable)
[ 0.000000] BIOS-e820: 000000007eef3000 - 000000007eeff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eeff000 - 000000007ef00000 (usable)
[ 0.000000] BIOS-e820: 000000007ef00000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 519594) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 519607, 519739) 2 entries of 3200
used
[ 0.000000] Entering add_active_range(0, 519913, 519917) 3 entries of 3200
used
[ 0.000000] Entering add_active_range(0, 519922, 519923) 4 entries of 3200
used
[ 0.000000] Entering add_active_range(0, 519935, 519936) 5 entries of 3200
used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 INTEL ) @
0x00000000000fe020
[ 0.000000] ACPI: RSDT (v001 INTEL DP965LT 0x000006a3 0x01000013) @
0x000000007eefd038
[ 0.000000] ACPI: FADT (v001 INTEL DP965LT 0x000006a3 MSFT 0x01000013) @
0x000000007eefc000
[ 0.000000] ACPI: MADT (v001 INTEL DP965LT 0x000006a3 MSFT 0x01000013) @
0x000000007eef6000
[ 0.000000] ACPI: WDDT (v001 INTEL DP965LT 0x000006a3 MSFT 0x01000013) @
0x000000007eef5000
[ 0.000000] ACPI: MCFG (v001 INTEL DP965LT 0x000006a3 MSFT 0x01000013) @
0x000000007eef4000
[ 0.000000] ACPI: ASF! (v032 INTEL DP965LT 0x000006a3 MSFT 0x01000013) @
0x000000007eef3000
[ 0.000000] ACPI: SSDT (v001 INTEL CpuPm 0x000006a3 MSFT 0x01000013) @
0x000000007eef1000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu0Ist 0x000006a3 MSFT 0x01000013) @
0x000000007eef0000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu1Ist 0x000006a3 MSFT 0x01000013) @
0x000000007eeef000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu2Ist 0x000006a3 MSFT 0x01000013) @
0x000000007eeee000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu3Ist 0x000006a3 MSFT 0x01000013) @
0x000000007eeed000
[ 0.000000] ACPI: DSDT (v001 INTEL DP965LT 0x000006a3 MSFT 0x01000013) @
0x0000000000000000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ef00000
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 519594) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 519607, 519739) 2 entries of 3200
used
[ 0.000000] Entering add_active_range(0, 519913, 519917) 3 entries of 3200
used
[ 0.000000] Entering add_active_range(0, 519922, 519923) 4 entries of 3200
used
[ 0.000000] Entering add_active_range(0, 519935, 519936) 5 entries of 3200
used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007ef00000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0 -> 143
[ 0.000000] 0: 256 -> 519594
[ 0.000000] 0: 519607 -> 519739
[ 0.000000] 0: 519913 -> 519917
[ 0.000000] 0: 519922 -> 519923
[ 0.000000] 0: 519935 -> 519936
[ 0.000000] On node 0 totalpages: 519619
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1088 pages reserved
[ 0.000000] DMA zone: 2839 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7052 pages used for memmap
[ 0.000000] DMA32 zone: 508584 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000008f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000
[ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000
[ 0.000000] Nosave address range: 000000007edaa000 - 000000007edb7000
[ 0.000000] Nosave address range: 000000007ee3b000 - 000000007eee9000
[ 0.000000] Nosave address range: 000000007eeed000 - 000000007eef2000
[ 0.000000] Nosave address range: 000000007eef3000 - 000000007eeff000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
7f000000:80f00000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 511423
[ 0.000000] Kernel command line:
root=UUID=bbd06a81-5262-4c9e-afc2-d4bd15cd2def ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 18.977198] Console: colour VGA+ 80x25
[ 18.978214] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 18.979015] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 18.979156] Checking aperture...
[ 18.979164] Calgary: detecting Calgary via BIOS EBDA area
[ 18.979168] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 18.995937] Memory: 2035544k/2079744k available (2218k kernel code, 42932k
reserved, 1162k data, 304k init)
[ 19.073899] Calibrating delay using timer specific routine.. 4265.66
BogoMIPS (lpj=8531336)
[ 19.073943] Security Framework v1.0.0 initialized
[ 19.073948] SELinux: Disabled at boot.
[ 19.073969] Mount-cache hash table entries: 256
[ 19.074092] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 19.074095] CPU: L2 cache: 4096K
[ 19.074097] CPU 0/0 -> Node 0
[ 19.074098] using mwait in idle threads.
[ 19.074100] CPU: Physical Processor ID: 0
[ 19.074101] CPU: Processor Core ID: 0
[ 19.074107] CPU0: Thermal monitoring enabled (TM2)
[ 19.074117] SMP alternatives: switching to UP code
[ 19.074320] Early unpacking initramfs... done
[ 19.375298] ACPI: Core revision 20060707
[ 19.376072] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[ 19.419042] Using local APIC timer interrupts.
[ 19.465919] result 16650627
[ 19.465921] Detected 16.650 MHz APIC timer.
[ 19.469662] SMP alternatives: switching to SMP code
[ 19.469768] Booting processor 1/2 APIC 0x1
[ 19.480695] Initializing CPU#1
[ 19.557439] Calibrating delay using timer specific routine.. 4262.70
BogoMIPS (lpj=8525408)
[ 19.557445] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 19.557446] CPU: L2 cache: 4096K
[ 19.557448] CPU 1/1 -> Node 0
[ 19.557450] CPU: Physical Processor ID: 0
[ 19.557451] CPU: Processor Core ID: 1
[ 19.557456] CPU1: Thermal monitoring enabled (TM2)
[ 19.557908] Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
[ 19.561455] Brought up 2 CPUs
[ 19.561493] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 19.561495] time.c: Detected 2131.281 MHz processor.
[ 19.645604] migration_cost=15
[ 19.645858] Time: 2:31:53 Date: 09/17/107
[ 19.645885] NET: Registered protocol family 16
[ 19.645948] ACPI: bus type pci registered
[ 19.645953] PCI: Using configuration type 1
[ 19.649121] ACPI: Interpreter enabled
[ 19.649123] ACPI: Using IOAPIC for interrupt routing
[ 19.649484] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.649491] PCI: Probing PCI hardware (bus 00)
[ 19.649507] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 19.651094] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 19.651097] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 19.651240] Boot video device is 0000:01:00.0
[ 19.651778] PCI: Transparent bridge - 0000:00:1e.0
[ 19.651846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.656390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 19.657020] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 19.657220] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 19.657439] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 19.657634] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 19.657835] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 19.658029] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 19.658224] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 19.658420] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 19.659852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 19.660064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 19.660276] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 19.660486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 19.660698] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 19.661931] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.661939] pnp: PnP ACPI init
[ 19.664744] pnp: PnP ACPI: found 13 devices
[ 19.664785] PCI: Using ACPI for IRQ routing
[ 19.664787] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 19.664864] NET: Registered protocol family 8
[ 19.664866] NET: Registered protocol family 20
[ 19.664882] PCI-GART: No AMD northbridge found.
[ 19.664933] pnp: 00:06: ioport range 0x500-0x53f has been reserved
[ 19.664935] pnp: 00:06: ioport range 0x400-0x47f could not be reserved
[ 19.664938] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
[ 19.665202] PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for
0000:01:00.0
[ 19.665244] PCI: Bridge: 0000:00:01.0
[ 19.665246] IO window: 3000-3fff
[ 19.665249] MEM window: 90000000-92ffffff
[ 19.665252] PREFETCH window: 80000000-8fffffff
[ 19.665255] PCI: Bridge: 0000:00:1c.0
[ 19.665256] IO window: disabled.
[ 19.665259] MEM window: disabled.
[ 19.665262] PREFETCH window: disabled.
[ 19.665266] PCI: Bridge: 0000:00:1c.1
[ 19.665268] IO window: 2000-2fff
[ 19.665272] MEM window: 93100000-931fffff
[ 19.665275] PREFETCH window: disabled.
[ 19.665278] PCI: Bridge: 0000:00:1c.2
[ 19.665279] IO window: disabled.
[ 19.665283] MEM window: disabled.
[ 19.665286] PREFETCH window: disabled.
[ 19.665289] PCI: Bridge: 0000:00:1c.3
[ 19.665290] IO window: disabled.
[ 19.665294] MEM window: disabled.
[ 19.665296] PREFETCH window: disabled.
[ 19.665300] PCI: Bridge: 0000:00:1c.4
[ 19.665301] IO window: disabled.
[ 19.665305] MEM window: disabled.
[ 19.665307] PREFETCH window: disabled.
[ 19.665311] PCI: Bridge: 0000:00:1e.0
[ 19.665313] IO window: 1000-1fff
[ 19.665317] MEM window: 93000000-930fffff
[ 19.665320] PREFETCH window: disabled.
[ 19.665331] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 19.665335] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.665369] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 19.665373] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 19.665386] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) ->
IRQ 16
[ 19.665390] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 19.665404] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 19.665408] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 19.665422] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) ->
IRQ 19
[ 19.665426] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 19.665439] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) ->
IRQ 17
[ 19.665443] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 19.665451] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 19.665477] NET: Registered protocol family 2
[ 19.705539] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.705696] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 19.706921] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 19.707352] TCP: Hash tables configured (established 262144 bind 65536)
[ 19.707355] TCP reno registered
[ 19.721728] checking if image is initramfs... it is
[ 20.310563] Freeing initrd memory: 6829k freed
[ 20.313662] audit: initializing netlink socket (disabled)
[ 20.313676] audit(1192588313.296:1): initialized
[ 20.313820] VFS: Disk quotas dquot_6.5.1
[ 20.313837] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 20.313880] io scheduler noop registered
[ 20.313882] io scheduler anticipatory registered
[ 20.313884] io scheduler deadline registered
[ 20.313894] io scheduler cfq registered (default)
[ 20.314346] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 20.314372] assign_interrupt_mode Found MSI capability
[ 20.314375] Allocate Port Service[0000:00:01.0:pcie00]
[ 20.314441] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 20.314473] assign_interrupt_mode Found MSI capability
[ 20.314475] Allocate Port Service[0000:00:1c.0:pcie00]
[ 20.314502] Allocate Port Service[0000:00:1c.0:pcie02]
[ 20.314580] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 20.314612] assign_interrupt_mode Found MSI capability
[ 20.314614] Allocate Port Service[0000:00:1c.1:pcie00]
[ 20.314640] Allocate Port Service[0000:00:1c.1:pcie02]
[ 20.314715] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 20.314747] assign_interrupt_mode Found MSI capability
[ 20.314749] Allocate Port Service[0000:00:1c.2:pcie00]
[ 20.314777] Allocate Port Service[0000:00:1c.2:pcie02]
[ 20.314853] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 20.314885] assign_interrupt_mode Found MSI capability
[ 20.314887] Allocate Port Service[0000:00:1c.3:pcie00]
[ 20.314913] Allocate Port Service[0000:00:1c.3:pcie02]
[ 20.314991] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 20.315023] assign_interrupt_mode Found MSI capability
[ 20.315025] Allocate Port Service[0000:00:1c.4:pcie00]
[ 20.315050] Allocate Port Service[0000:00:1c.4:pcie02]
[ 20.332699] Real Time Clock Driver v1.12ac
[ 20.332740] Linux agpgart interface v0.102 (c) Dave Jones
[ 20.332742] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 20.332849] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.333308] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.333446] mice: PS/2 mouse device common for all mice
[ 20.333896] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 20.334012] input: Macintosh mouse button emulation as /class/input/input0
[ 20.334038] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.334041] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 20.334203] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 20.337065] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.337069] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.337193] TCP cubic registered
[ 20.337200] NET: Registered protocol family 1
[ 20.337291] ACPI: (supports S0 S3 S4 S5)
[ 20.337325] Magic number: 11:986:510
[ 20.337381] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 20.337438] Freeing unused kernel memory: 304k freed
[ 20.355567] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.473876] Capability LSM initialized
[ 21.506096] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 21.506173] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 21.506179] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor
Device is not present [20060707]
[ 21.506184] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor
Device is not present [20060707]
[ 21.766876] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 21.766879] Copyright (c) 1999-2006 Intel Corporation.
[ 21.766914] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 21.766925] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 21.784138] usbcore: registered new interface driver usbfs
[ 21.784156] usbcore: registered new interface driver hub
[ 21.807385] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1)
00:19:d1:e9:93:02
[ 21.839166] usbcore: registered new device driver usb
[ 21.841392] ieee1394: Initialized config rom entry `ip1394'
[ 21.856294] SCSI subsystem initialized
[ 21.861233] libata version 2.20 loaded.
[ 21.861785] USB Universal Host Controller Interface driver v3.0
[ 21.862414] Floppy drive(s): fd0 is 1.44M
[ 21.902227] FDC 0 is a National Semiconductor PC87306
[ 21.923285] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 21.923336] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 21.923346] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 21.923349] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 21.923431] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 21.923454] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040c0
[ 21.923538] usb usb1: configuration #1 chosen from 1 choice
[ 21.923558] hub 1-0:1.0: USB hub found
[ 21.923562] hub 1-0:1.0: 2 ports detected
[ 22.030297] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) ->
IRQ 21
[ 22.030304] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 22.030308] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 22.030330] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 2
[ 22.030353] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040a0
[ 22.030432] usb usb2: configuration #1 chosen from 1 choice
[ 22.030464] hub 2-0:1.0: USB hub found
[ 22.030468] hub 2-0:1.0: 2 ports detected
[ 22.134922] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 23
[ 22.134929] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 22.134933] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 22.134951] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 3
[ 22.134975] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 22.135056] usb usb3: configuration #1 chosen from 1 choice
[ 22.135090] hub 3-0:1.0: USB hub found
[ 22.135093] hub 3-0:1.0: 2 ports detected
[ 22.239363] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 19
[ 22.239371] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 22.239375] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 22.239393] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 4
[ 22.239417] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 22.239500] usb usb4: configuration #1 chosen from 1 choice
[ 22.239523] hub 4-0:1.0: USB hub found
[ 22.239528] hub 4-0:1.0: 2 ports detected
[ 22.344192] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 22.344199] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 22.344202] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.344223] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 5
[ 22.344246] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 22.344324] usb usb5: configuration #1 chosen from 1 choice
[ 22.344359] hub 5-0:1.0: USB hub found
[ 22.344363] hub 5-0:1.0: 2 ports detected
[ 22.449239] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) ->
IRQ 18
[ 22.449252] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 22.449255] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 22.449276] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 6
[ 22.449312] ehci_hcd 0000:00:1a.7: debug port 1
[ 22.449317] PCI: cache line size of 32 is not supported by device
0000:00:1a.7
[ 22.449321] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x93225c00
[ 22.453203] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 22.453257] usb usb6: configuration #1 chosen from 1 choice
[ 22.453274] hub 6-0:1.0: USB hub found
[ 22.453280] hub 6-0:1.0: 4 ports detected
[ 22.557910] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 23
[ 22.557926] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 22.557930] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 22.557955] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 7
[ 22.557982] ehci_hcd 0000:00:1d.7: debug port 1
[ 22.557988] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 22.557994] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x93225800
[ 22.561860] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 22.561913] usb usb7: configuration #1 chosen from 1 choice
[ 22.561934] hub 7-0:1.0: USB hub found
[ 22.561938] hub 7-0:1.0: 6 ports detected
[ 22.666448] ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) ->
IRQ 19
[ 22.716557] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
MMIO=[93014000-930147ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 22.716671] ahci 0000:00:1f.2: version 2.1
[ 22.716684] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) ->
IRQ 19
[ 23.721408] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 23.721415] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33
impl SATA mode
[ 23.721419] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[ 23.721499] ata1: SATA max UDMA/133 cmd 0xffffc20000070100 ctl
0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 23.721556] ata2: SATA max UDMA/133 cmd 0xffffc20000070180 ctl
0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 23.721574] ata3: DUMMY
[ 23.721591] ata4: DUMMY
[ 23.721651] ata5: SATA max UDMA/133 cmd 0xffffc20000070300 ctl
0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 23.721696] ata6: SATA max UDMA/133 cmd 0xffffc20000070380 ctl
0x0000000000000000 bmdma 0x0000000000000000 irq 19
[ 23.721701] scsi0 : ahci
[ 23.987310] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001dff9d2]
[ 24.208859] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 24.253688] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors =
312581808
[ 24.253693] ata1.00: ATA-7: MAXTOR STM3160211AS, 3.AAE, max UDMA/133
[ 24.253696] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 24.311930] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors =
312581808
[ 24.311934] ata1.00: configured for UDMA/133
[ 24.311941] scsi1 : ahci
[ 24.624084] ata2: SATA link down (SStatus 0 SControl 300)
[ 24.624093] scsi2 : ahci
[ 24.624127] scsi3 : ahci
[ 24.624159] scsi4 : ahci
[ 24.933950] ata5: SATA link down (SStatus 0 SControl 300)
[ 24.933959] scsi5 : ahci
[ 25.244174] ata6: SATA link down (SStatus 0 SControl 300)
[ 25.244261] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM316021 3.AA
PQ: 0 ANSI: 5
[ 25.247107] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 25.247123] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 25.247146] ata7: PATA max UDMA/100 cmd 0x0000000000012018 ctl
0x0000000000012026 bmdma 0x0000000000012000 irq 17
[ 25.247158] scsi6 : pata_marvell
[ 25.247199] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00
0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
[ 25.251334] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 25.251343] sda: Write Protect is off
[ 25.251345] sda: Mode Sense: 00 3a 00 00
[ 25.251357] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 25.251390] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 25.251397] sda: Write Protect is off
[ 25.251398] sda: Mode Sense: 00 3a 00 00
[ 25.251410] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 25.251412] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 25.352496] sd 0:0:0:0: Attached scsi disk sda
[ 25.355941] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 25.567203] ata7.00: ATAPI, max UDMA/33
[ 25.732614] ata7.00: configured for UDMA/33
[ 25.733483] scsi 6:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182F SB02
PQ: 0 ANSI: 5
[ 25.733546] scsi 6:0:0:0: Attached scsi generic sg1 type 5
[ 25.747244] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 25.747247] Uniform CD-ROM driver Revision: 3.20
[ 25.747383] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 25.763437] Attempting manual resume
[ 25.763440] swsusp: Resume From Partition 8:3
[ 25.763441] PM: Checking swsusp image.
[ 25.776803] PM: Resume from disk failed.
[ 25.800160] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 25.800163] EXT3-fs: write access will be enabled during recovery.
[ 26.355321] kjournald starting. Commit interval 5 seconds
[ 26.355328] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 26.355332] ext3_orphan_cleanup: deleting unreferenced inode 2183385
[ 26.355350] ext3_orphan_cleanup: deleting unreferenced inode 673063
[ 26.355358] ext3_orphan_cleanup: deleting unreferenced inode 673065
[ 26.355364] ext3_orphan_cleanup: deleting unreferenced inode 673062
[ 26.355369] ext3_orphan_cleanup: deleting unreferenced inode 673061
[ 26.355374] ext3_orphan_cleanup: deleting unreferenced inode 673060
[ 26.355379] EXT3-fs: sda1: 6 orphan inodes deleted
[ 26.355381] EXT3-fs: recovery complete.
[ 26.361859] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.292681] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt
Error: -22
[ 32.296958] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
[ 32.296961] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 33.639788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 33.733602] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.895179] agpgart: Detected an Intel 965G Chipset.
[ 33.907446] agpgart: AGP aperture is 256M @ 0x0
[ 34.062392] iTCO_vendor_support: vendor-support=0
[ 34.096123] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 34.224579] parport: PnPBIOS parport detected.
[ 34.224654] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
[ 34.470172] NET: Registered protocol family 10
[ 34.470241] lo: Disabled Privacy Extensions
[ 34.565394] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 34.567957] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2,
TCOBASE=0x0460)
[ 34.567992] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 34.568033] input: PC Speaker as /class/input/input3
[ 35.474029] nvidia: module license 'NVIDIA' taints kernel.
[ 35.726791] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 35.726834] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 35.726917] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed
Jun 13 16:33:22 PDT 2007
[ 35.896918] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 35.896935] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 37.122753] fuse init (API version 7.8)
[ 37.157902] lp0: using parport0 (interrupt-driven).
[ 37.265875] Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1
across:2096472k
[ 37.642780] EXT3 FS on sda1, internal journal
[ 38.796609] kjournald starting. Commit interval 5 seconds
[ 38.796805] EXT3 FS on sda6, internal journal
[ 38.796810] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.145972] kjournald starting. Commit interval 5 seconds
[ 39.146180] EXT3 FS on sda7, internal journal
[ 39.146185] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.915482] Using specific hotkey driver
[ 40.962797] No dock devices found.
[ 41.008004] ibm_acpi: ec object not found
[ 41.095740] input: Power Button (FF) as /class/input/input4
[ 41.095885] ACPI: Power Button (FF) [PWRF]
[ 41.114234] input: Sleep Button (CM) as /class/input/input5
[ 41.114260] ACPI: Sleep Button (CM) [SLPB]
[ 41.151576] pcc_acpi: loading...
[ 45.416644] eth0: no IPv6 routers present
[ 47.788212] Capability LSM initialized
[ 49.595574] ppdev: user-space parallel port driver
[ 53.697653] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[ 53.755728] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 53.762698] NFSD: starting 90-second grace period
[ 54.302613] Bluetooth: Core ver 2.11
[ 54.302664] NET: Registered protocol family 31
[ 54.302666] Bluetooth: HCI device and connection manager initialized
[ 54.302669] Bluetooth: HCI socket layer initialized
[ 54.320481] Bluetooth: L2CAP ver 2.8
[ 54.320485] Bluetooth: L2CAP socket layer initialized
[ 54.387552] Bluetooth: RFCOMM socket layer initialized
[ 54.387567] Bluetooth: RFCOMM TTY layer initialized
[ 54.387569] Bluetooth: RFCOMM ver 1.8
[ 2640.125574] gnome-video-thu[6623]: segfault at 0000000000000010 rip
00002b5662de3e50 rsp 00007fff4cd2c468 error 4
[ 3180.536392] gnome-video-thu[6923]: segfault at 0000000000000010 rip
00002b052c22ee50 rsp 00007fff838e2f98 error 4
-------------------------------------------------------------------------------------------------------
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev
02)
Subsystem: Intel Corporation Unknown device 514d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev
02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 90000000-92ffffff
Prefetchable memory behind bridge: 0000000080000000-000000008fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] Subsystem: Intel Corporation Unknown device 514d
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 0, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:03.0 Communication controller: Intel Corporation 82P965/G965 HECI Controller
(rev 02)
Subsystem: Intel Corporation Unknown device 514d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 93226100 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network
Connection (rev 02)
Subsystem: Intel Corporation Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 93200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 93224000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 40e0 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Contoller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 40c0 [size=32]
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 40a0 [size=32]
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 514d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 93225c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 02)
Subsystem: Intel Corporation Unknown device 2111
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 93220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 1, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801H (ICH8 Family)
PCI Express Port 1
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 93100000-931fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 2, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801H (ICH8 Family)
PCI Express Port 2
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 3, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801H (ICH8 Family)
PCI Express Port 3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 4, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801H (ICH8 Family)
PCI Express Port 4
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 5
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 5, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801H (ICH8 Family)
PCI Express Port 5
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 4080 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 4060 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 514d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 4040 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 514d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 93225800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) (prog-if 01
[Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 93000000-930fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Subsystem: Intel Corporation Unknown device 514d
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller (rev 02)
Subsystem: Intel Corporation Unknown device 514d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 SATA controller: Intel Corporation 82801HB (ICH8) 4 port SATA AHCI
Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Unknown device 514d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 4408 [size=8]
Region 1: I/O ports at 4414 [size=4]
Region 2: I/O ports at 4400 [size=8]
Region 3: I/O ports at 4410 [size=4]
Region 4: I/O ports at 4020 [size=32]
Region 5: Memory at 93225000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4
Enable-
Address: 00000000 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] #12 [0010]
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
Subsystem: Intel Corporation Unknown device 514d
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: Memory at 93226000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 4000 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)
(prog-if 00 [VGA])
Subsystem: XFX Pine Group Inc. Unknown device 2305
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 92000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at 90000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 3000 [size=128]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <512ns, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port
PATA133 interface (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. 88SE6101 single-port PATA133
interface
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 2018 [size=8]
Region 1: I/O ports at 2024 [size=4]
Region 2: I/O ports at 2010 [size=8]
Region 3: I/O ports at 2020 [size=4]
Region 4: I/O ports at 2000 [size=16]
Region 5: Memory at 93100000 (32-bit, non-prefetchable) [size=512]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <256ns, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
07:02.0 Communication controller: Conexant Unknown device 2f50 (rev 01)
Subsystem: Conexant Unknown device 205f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 93000000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at 1000 [size=8]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
07:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Unknown device 514d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 93014000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 93010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
-------------------------------------------------------------------------------------------------------------------------------------------------------
** Affects: ubuntu
Importance: Undecided
Status: New
--
Boot failed on kernel 2.6.22-14 when upgrading feisty to gutsy
https://bugs.launchpad.net/bugs/153528
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
