is now a bad time to say i've been apt updating for some time just fine now, my previous instructions should still be accurate:
i can confirm that To fix the uboot error, you have to change the config.txt lines: # set extended DT area #device_tree_address=0x100 #device_tree_end=0x8000 device_tree_address=0x02008000 commented device_tree_end out and made sure device_tree_address was the correct value (0x02008000) fixes things for me - currently booting into 1042 i note that the flash-kernel and linux-firmware-raspi2 updates recently accounted for changing the device_tree_address but neither comment or hide device_tree_end - i suspect if you worked out the correct value for this then it would also still work -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1652270 Title: Could not boot into RPi3 with kernel 4.4.0-1038-raspi2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1652270/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
