OK. BTW, it is /usr/bin/nm-tool, not /usr/sbin/nm-tool. Output of first run (during boot) ================== NetworkManager Tool
State: connected - Device: eth0 ---------------------------------------------------------------- NM Path: /org/freedesktop/NetworkManager/Devices/eth0 Type: Wired Driver: e100 Active: yes HW Address: 00:02:55:1A:5D:7C Capabilities: Supported: yes Carrier Detect: yes Speed: 100 Mb/s Wired Settings Hardware Link: yes IP Settings: IP Address: 0.0.0.0 Subnet Mask: 0.0.0.0 Broadcast: 0.0.0.0 Gateway: 0.0.0.0 Primary DNS: 0.0.0.0 Secondary DNS: 0.0.0.0 ================== Output of second run (after boot) ================== NetworkManager Tool State: connected - Device: eth0 ---------------------------------------------------------------- NM Path: /org/freedesktop/NetworkManager/Devices/eth0 Type: Wired Driver: e100 Active: yes HW Address: 00:02:55:1A:5D:7C Capabilities: Supported: yes Carrier Detect: yes Speed: 100 Mb/s Wired Settings Hardware Link: yes IP Settings: IP Address: 192.168.1.11 Subnet Mask: 255.255.255.0 Broadcast: 192.168.1.255 Gateway: 192.168.1.1 Primary DNS: 192.168.1.1 Secondary DNS: 0.0.0.0 ================== eth0 does not appear to have an assigned IP address the first time /etc/init.d/nis is run. -- nis daemon fails to attach to domain the first time it is run in Gutsy https://bugs.launchpad.net/bugs/152794 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs