Just in case, this the output of a "dmesg" command:
firewall# dmesg
[ 0.000000] Linux version 4.4.61-x86_64 (kapeka@stalker) (gcc version 5.3.0
(GCC) ) #1 SMP Thu Apr 13 19:03:07 CEST 2017
[ 0.000000] Command line: rw root=/dev/ram0 console=ttyS0,115200n8 VERBOSE=1
PKGPATH=/dev/sda1:vfat LRP=root,license,local
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Ubuntu-1.8.2-1ubuntu1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000f6640-0x000f664f] mapped at
[ffff8800000f6640]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] BRK [0x01c89000, 0x01c89fff] PGTABLE
[ 0.000000] BRK [0x01c8a000, 0x01c8afff] PGTABLE
[ 0.000000] BRK [0x01c8b000, 0x01c8bfff] PGTABLE
[ 0.000000] BRK [0x01c8c000, 0x01c8cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1ff57000-0x1ffdffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6460 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x000000001FFE16FA 000034 (v01 BOCHS BXPCRSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x000000001FFE0C14 000074 (v01 BOCHS BXPCFACP
00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x000000001FFE0040 000BD4 (v01 BOCHS BXPCDSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x000000001FFE0000 000040
[ 0.000000] ACPI: SSDT 0x000000001FFE0C88 0009C2 (v01 BOCHS BXPCSSDT
00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x000000001FFE164A 000078 (v01 BOCHS BXPCAPIC
00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x000000001FFE16C2 000038 (v01 BOCHS BXPCHPET
00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1ff56001, primary cpu clock
[ 0.000000] kvm-clock: using sched offset of 1738164004 cycles
[ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles:
0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000001ffdffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffdffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdffff]
[ 0.000000] On node 0 totalpages: 130942
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1984 pages used for memmap
[ 0.000000] DMA32 zone: 126944 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88001fc00000 s94232 r8192
d32744 u2097152
[ 0.000000] pcpu-alloc: s94232 r8192 d32744 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1fc0d700
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 128873
[ 0.000000] Kernel command line: rw root=/dev/ram0 console=ttyS0,115200n8
VERBOSE=1 PKGPATH=/dev/sda1:vfat LRP=root,license,local
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Memory: 501128K/523768K available (5882K kernel code, 793K
rwdata, 2136K rodata, 1296K init, 472K bss, 22640K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] Console: colour *CGA 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 19112604467 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2495.336 MHz processor
[ 0.141367] Calibrating delay loop (skipped) preset value.. 4990.67 BogoMIPS
(lpj=2495336)
[ 0.143480] pid_max: default: 32768 minimum: 301
[ 0.144654] ACPI: Core revision 20150930
[ 0.147009] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.148686] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.150390] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.152365] mce: CPU supports 10 MCE banks
[ 0.153443] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.154711] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.169508] Freeing SMP alternatives memory: 24K (ffffffff81c0c000 -
ffffffff81c12000)
[ 0.179824] ftrace: allocating 23405 entries in 92 pages
[ 0.220907] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.324183] smpboot: CPU0: AMD QEMU Virtual CPU version 2.5+ (family: 0x6,
model: 0x6, stepping: 0x3)
[ 0.326426] Performance Events: AMD PMU driver.
[ 0.327521] ... version: 0
[ 0.328385] ... bit width: 48
[ 0.329333] ... generic registers: 4
[ 0.330274] ... value mask: 0000ffffffffffff
[ 0.331467] ... max period: 00007fffffffffff
[ 0.332669] ... fixed-purpose events: 0
[ 0.333608] ... event mask: 000000000000000f
[ 0.335019] Huh? What family is it: 0x6?!
[ 0.335899] MCE: In-kernel MCE decoding enabled.
[ 0.336933] x86: Booted up 1 node, 1 CPUs
[ 0.337849] smpboot: Total of 1 processors activated (4990.67 BogoMIPS)
[ 0.340028] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275000 ns
[ 0.341990] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.343764] NET: Registered protocol family 16
[ 0.344942] cpuidle: using governor ladder
[ 0.345930] cpuidle: using governor menu
[ 0.346934] ACPI: bus type PCI registered
[ 0.347754] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.349264] PCI: Using configuration type 1 for base access
[ 0.357481] ACPI: Added _OSI(Module Device)
[ 0.358559] ACPI: Added _OSI(Processor Device)
[ 0.359615] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.360729] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.363889] ACPI: Interpreter enabled
[ 0.364757] ACPI: (supports S0 S5)
[ 0.365560] ACPI: Using IOAPIC for interrupt routing
[ 0.366603] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.372906] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.374375] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.375982] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.377539] acpi PNP0A03:00: fail to add MMCONFIG information, can't access
extended PCI configuration space under this bridge.
[ 0.380133] acpiphp: Slot [2] registered
[ 0.381015] acpiphp: Slot [3] registered
[ 0.381881] acpiphp: Slot [4] registered
[ 0.382745] acpiphp: Slot [5] registered
[ 0.383580] acpiphp: Slot [6] registered
[ 0.384457] acpiphp: Slot [7] registered
[ 0.385305] acpiphp: Slot [8] registered
[ 0.386114] acpiphp: Slot [9] registered
[ 0.386968] acpiphp: Slot [10] registered
[ 0.387886] acpiphp: Slot [11] registered
[ 0.388657] acpiphp: Slot [12] registered
[ 0.389358] acpiphp: Slot [13] registered
[ 0.390047] acpiphp: Slot [14] registered
[ 0.390829] acpiphp: Slot [15] registered
[ 0.391627] acpiphp: Slot [16] registered
[ 0.392587] acpiphp: Slot [17] registered
[ 0.393401] acpiphp: Slot [18] registered
[ 0.394264] acpiphp: Slot [19] registered
[ 0.395236] acpiphp: Slot [20] registered
[ 0.396224] acpiphp: Slot [21] registered
[ 0.397211] acpiphp: Slot [22] registered
[ 0.398192] acpiphp: Slot [23] registered
[ 0.399137] acpiphp: Slot [24] registered
[ 0.400050] acpiphp: Slot [25] registered
[ 0.400970] acpiphp: Slot [26] registered
[ 0.401881] acpiphp: Slot [27] registered
[ 0.402768] acpiphp: Slot [28] registered
[ 0.403681] acpiphp: Slot [29] registered
[ 0.404580] acpiphp: Slot [30] registered
[ 0.405473] acpiphp: Slot [31] registered
[ 0.406337] PCI host bridge to bus 0000:00
[ 0.407192] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.408618] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.410013] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.411592] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff
window]
[ 0.413192] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.414407] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.414995] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.415776] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.419084] pci 0000:00:01.1: reg 0x20: [io 0xc000-0xc00f]
[ 0.420701] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.422231] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.423551] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.425014] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.426904] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.427506] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4
ACPI
[ 0.429205] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.431383] pci_bus 0000:00: on NUMA node 0
[ 0.431998] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.433451] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.434961] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.436408] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.437849] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.439391] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.441194] vgaarb: loaded
[ 0.441929] SCSI subsystem initialized
[ 0.444424] libata version 3.00 loaded.
[ 0.444434] ACPI: bus type USB registered
[ 0.445371] usbcore: registered new interface driver usbfs
[ 0.446559] usbcore: registered new interface driver hub
[ 0.447869] usbcore: registered new device driver usb
[ 0.449519] PCI: Using ACPI for IRQ routing
[ 0.450515] PCI: pci_cache_line_size set to 64 bytes
[ 0.450620] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.450623] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff]
[ 0.450886] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.452438] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.453672] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.458315] amd_nb: Cannot enumerate AMD northbridges
[ 0.459384] clocksource: Switched to clocksource kvm-clock
[ 0.469963] pnp: PnP ACPI init
[ 0.470948] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.471011] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.471057] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.471104] pnp 00:03: [dma 2]
[ 0.471127] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.471247] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.471623] pnp: PnP ACPI: found 5 devices
[ 0.478666] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.480456] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.480459] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.480462] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.480465] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[ 0.480504] NET: Registered protocol family 2
[ 0.481558] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.482995] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.484320] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.485643] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.486837] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.488150] NET: Registered protocol family 1
[ 0.489056] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.490267] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.491415] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.492618] PCI: CLS 0 bytes, default 64
[ 0.493984] Trying to unpack rootfs image as initramfs...
[ 0.505786] Freeing initrd memory: 548K (ffff88001ff57000 - ffff88001ffe0000)
[ 0.507764] Scanning for low memory corruption every 60 seconds
[ 0.509846] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.515088] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.517323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 0.518948] io scheduler noop registered
[ 0.519857] io scheduler cfq registered (default)
[ 0.521025] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.522267] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.523824] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.525460] ACPI: Power Button [PWRF]
[ 0.526373] GHES: HEST is not enabled!
[ 0.527179] xenfs: not registering filesystem on non-xen platform
[ 0.528525] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.556061] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a
16550A
[ 0.561195] brd: module loaded
[ 0.564596] loop: module loaded
[ 0.565283] skd: v2.2.1-b0260 loaded
[ 0.566074] mtip32xx Version 1.3.1
[ 0.567154] zram: Added device: zram0
[ 0.568295] ata_piix 0000:00:01.1: version 2.13
[ 0.570121] FDC 0 is a S82078B
[ 0.571426] scsi host0: ata_piix
[ 0.572468] scsi host1: ata_piix
[ 0.573183] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 0.574631] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 0.577554] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.578977] ehci-pci: EHCI PCI platform driver
[ 0.579915] ehci-platform: EHCI generic platform driver
[ 0.580997] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.582272] ohci-pci: OHCI PCI platform driver
[ 0.583263] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.584621] usbcore: registered new interface driver usb-storage
[ 0.585861] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 0.588420] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.589465] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.590662] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 0.592062] rtc_cmos 00:00: RTC can wake from S4
[ 0.593418] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.594894] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.596327] sdhci: Secure Digital Host Controller Interface driver
[ 0.597637] sdhci: Copyright(c) Pierre Ossman
[ 0.598637] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.599803] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.600931] usbcore: registered new interface driver usbhid
[ 0.602007] usbhid: USB HID core driver
[ 0.602915] NET: Registered protocol family 17
[ 0.603818] Key type dns_resolver registered
[ 0.605057] microcode: AMD CPU family 0x6 not supported
[ 0.607119] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 0.728744] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[ 0.729972] ata1.00: 524288 sectors, multi 16: LBA48
[ 0.731471] ata1.01: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[ 0.733434] ata1.01: 1032192 sectors, multi 16: LBA48
[ 0.736249] ata1.00: configured for MWDMA2
[ 0.738486] ata1.01: configured for MWDMA2
[ 0.739444] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.741982] sd 0:0:0:0: [sda] 524288 512-byte logical blocks: (268 MB/256
MiB)
[ 0.743988] sd 0:0:0:0: [sda] Write Protect is off
[ 0.745099] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.745113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 0.747723] scsi 0:0:1:0: Direct-Access ATA QEMU HARDDISK 2.5+
PQ: 0 ANSI: 5
[ 0.750102] sd 0:0:1:0: [sdb] 1032192 512-byte logical blocks: (528 MB/504
MiB)
[ 0.752090] sd 0:0:1:0: [sdb] Write Protect is off
[ 0.753399] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.753411] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 0.756666] sda: sda1
[ 0.757441] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.758734] sdb: sdb1
[ 0.759388] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 0.762115] Freeing unused kernel memory: 1296K (ffffffff81ac8000 -
ffffffff81c0c000)
[ 0.764256] Write protecting the kernel read-only data: 10240k
[ 0.766191] Freeing unused kernel memory: 248K (ffff8800015c2000 -
ffff880001600000)
[ 0.775481] Freeing unused kernel memory: 1960K (ffff880001816000 -
ffff880001a00000)
[ 0.810772] random: find: uninitialized urandom read (8 bytes read, 3 bits
of entropy available)
[ 0.831717] random: hotplug.sh: uninitialized urandom read (8 bytes read, 3
bits of entropy available)
[ 0.833836] random: hotplug.sh: uninitialized urandom read (8 bytes read, 3
bits of entropy available)
[ 0.835975] random: hotplug.sh: uninitialized urandom read (8 bytes read, 3
bits of entropy available)
[ 0.838243] random: hotplug.sh: uninitialized urandom read (8 bytes read, 3
bits of entropy available)
[ 0.840990] random: hotplug.sh: uninitialized urandom read (8 bytes read, 3
bits of entropy available)
[ 0.843737] random: hotplug.sh: uninitialized urandom read (8 bytes read, 3
bits of entropy available)
[ 0.846516] random: hotplug.sh: uninitialized urandom read (8 bytes read, 3
bits of entropy available)
[ 0.849228] random: hotplug.sh: uninitialized urandom read (8 bytes read, 3
bits of entropy available)
[ 0.852005] random: hotplug.sh: uninitialized urandom read (8 bytes read, 3
bits of entropy available)
[ 1.510686] tsc: Refined TSC clocksource calibration: 2495.332 MHz
[ 1.512361] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x23f8003d665, max_idle_ns: 440795255217 ns
[ 4.158959] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700,
revision 0
[ 4.838822] softdog: Software Watchdog Timer: 0.08 initialized.
soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 4.982043] NET: Registered protocol family 10
[ 5.000259] 8021q: 802.1Q VLAN Support v1.8
[ 5.038615] u32 classifier
[ 5.039295] Performance counters on
[ 5.040081] input device check on
[ 5.040849] Actions configured
[ 36.744506] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 36.746008] ata1.01: BMDMA stat 0x4
[ 36.746866] ata1.01: failed command: WRITE DMA
[ 36.747807] ata1.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 dma 512
out
[ 36.747807] res 41/04:01:3f:00:00/00:00:00:00:00/f0 Emask 0x1
(device error)
[ 36.750913] ata1.01: status: { DRDY ERR }
[ 36.751745] ata1.01: error: { ABRT }
[ 36.753735] ata1.00: configured for MWDMA2
[ 36.754238] ata1.01: configured for MWDMA2
[ 36.754248] ata1: EH complete
[ 36.764677] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 36.766125] ata1.01: BMDMA stat 0x4
[ 36.767184] ata1.01: failed command: WRITE DMA
[ 36.768635] ata1.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 dma 512
out
[ 36.768635] res 41/04:01:3f:00:00/00:00:00:00:00/f0 Emask 0x1
(device error)
[ 36.773205] ata1.01: status: { DRDY ERR }
[ 36.774506] ata1.01: error: { ABRT }
[ 36.776598] ata1.00: configured for MWDMA2
[ 36.777102] ata1.01: configured for MWDMA2
[ 36.777112] ata1: EH complete
[ 36.787678] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 36.789165] ata1.01: BMDMA stat 0x4
[ 36.790130] ata1.01: failed command: WRITE DMA
[ 36.791582] ata1.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 dma 512
out
[ 36.791582] res 41/04:01:3f:00:00/00:00:00:00:00/f0 Emask 0x1
(device error)
[ 36.796144] ata1.01: status: { DRDY ERR }
[ 36.797466] ata1.01: error: { ABRT }
[ 36.799712] ata1.00: configured for MWDMA2
[ 36.800214] ata1.01: configured for MWDMA2
[ 36.800223] ata1: EH complete
[ 36.810702] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 36.812454] ata1.01: BMDMA stat 0x4
[ 36.813437] ata1.01: failed command: WRITE DMA
[ 36.814777] ata1.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 dma 512
out
[ 36.814777] res 41/04:01:3f:00:00/00:00:00:00:00/f0 Emask 0x1
(device error)
[ 36.820131] ata1.01: status: { DRDY ERR }
[ 36.821591] ata1.01: error: { ABRT }
[ 36.824043] ata1.00: configured for MWDMA2
[ 36.824600] ata1.01: configured for MWDMA2
[ 36.824610] ata1: EH complete
[ 36.834702] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 36.836377] ata1.01: BMDMA stat 0x4
[ 36.836956] ata1.01: failed command: WRITE DMA
[ 36.838085] ata1.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 dma 512
out
[ 36.838085] res 41/04:01:3f:00:00/00:00:00:00:00/f0 Emask 0x1
(device error)
[ 36.843086] ata1.01: status: { DRDY ERR }
[ 36.844550] ata1.01: error: { ABRT }
[ 36.847300] ata1.00: configured for MWDMA2
[ 36.847863] ata1.01: configured for MWDMA2
[ 36.847873] ata1: EH complete
[ 36.857675] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 36.859795] ata1.01: BMDMA stat 0x4
[ 36.861107] ata1.01: failed command: WRITE DMA
[ 36.862769] ata1.01: cmd ca/00:01:3f:00:00/00:00:00:00:00/f0 tag 0 dma 512
out
[ 36.862769] res 41/04:01:3f:00:00/00:00:00:00:00/f0 Emask 0x1
(device error)
[ 36.868085] ata1.01: status: { DRDY ERR }
[ 36.869334] ata1.01: error: { ABRT }
[ 36.871646] ata1.00: configured for MWDMA2
[ 36.872151] ata1.01: configured for MWDMA2
[ 36.872166] sd 0:0:1:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 36.872170] sd 0:0:1:0: [sdb] tag#0 Sense Key : Illegal Request [current]
[descriptor]
[ 36.872174] sd 0:0:1:0: [sdb] tag#0 Add. Sense: Unaligned write command
[ 36.872178] sd 0:0:1:0: [sdb] tag#0 CDB: Write(10) 2a 00 00 00 00 3f 00 00
01 00
[ 36.872181] blk_update_request: I/O error, dev sdb, sector 63
[ 36.873362] Buffer I/O error on dev sdb1, logical block 0, lost sync page
write
[ 36.875082] ata1: EH complete
[ 36.875499] sda: detected capacity change from 0 to 268435456
[ 36.875572] sda: detected capacity change from 0 to 268435456
[ 78.637915] FAT-fs (sdb1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
[ 78.641513] FAT-fs (sdb1): Filesystem has been set read-only
[ 78.645753] FAT-fs (sdb1): error, fat_get_cluster: invalid cluster chain
(i_pos 0)
firewall#
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1684239
Title:
vvfat core dump when enabling RW
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1684239/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
