Testing on QDF2400 ARM64 platform. == With the patch ==
ubuntu@ubuntu:~$ lsmod | grep -E "qcom_emac|at803x" at803x 16384 0 qcom_emac 49152 0 ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo ifup eth0 Jun 6 17:47:26 ubuntu kernel: [ 176.658581] Atheros 8031 ethernet QCOM8070:00:04: attached PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=QCOM8070:00:04, irq=-1) Jun 6 17:47:26 ubuntu kernel: [ 176.658649] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 6 17:47:27 ubuntu kernel: [ 177.687890] qcom-emac QCOM8070:00 eth0: Link is Down Jun 6 17:47:30 ubuntu kernel: [ 179.735532] qcom-emac QCOM8070:00 eth0: Link is Up - 1Gbps/Full - flow control rx/tx Jun 6 17:47:30 ubuntu kernel: [ 179.735544] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Listening on LPF/eth0/8c:fd:f0:06:92:a5 Sending on LPF/eth0/8c:fd:f0:06:92:a5 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 (xid=0x1108047b) ... DHCPREQUEST of 10.228.66.113 on eth0 to 255.255.255.255 port 67 (xid=0x7b040811) DHCPOFFER of 10.228.66.113 from 10.228.66.3 DHCPACK of 10.228.66.113 from 10.228.66.3 bound to 10.228.66.113 -- renewal in 278 seconds. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1696143 Title: [SRU][Zesty] qcom_emac is unable to get ip address with at803x phy driver. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1696143/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
