The computer on which I have this problem, has an AMD environment. I 
copied the affected virtual machine to a computer with an Intel 
environment. I started the tests with Ubuntu's 32-bit version 14.04 
(EOLE, see the following list of the machine). The boot symptoms are the 
same (error: no such device: system_disk_label ...). Now, in the tests 
of the other versions of Ubuntu (64 bits, 16.04 and 17.04), the Linux 
kernel is in panic: "CPU: 2 PID: Comm: run-init Not tainted 
4.4.0-78-generic # 99 ~ 14.04.2-Ubuntu ".

It can be seen from the machine list that on the 7 virtual disks, the 5 
that are mounted on the 0-4 positions of the SATA controller have 
bootable systems.

cyclope@MIMAS:~$ VBoxManage showvminfo "NET3UT03"
Name:            NET3UT03
Groups:          /
Guest OS:        Ubuntu (64-bit)
UUID:            b90abb16-9303-4a30-8e3f-0ad4928a14fa
Config file:     /home/cyclope/VirtualBox VMs/NET3UT03/NET3UT03.vbox
Snapshot folder: /home/cyclope/VirtualBox VMs/NET3UT03/Snapshots
Log folder:      /home/cyclope/VirtualBox VMs/NET3UT03/Logs
Hardware UUID:   b90abb16-9303-4a30-8e3f-0ad4928a14fa
Memory size:     3072MB
Page Fusion:     off
VRAM size:       12MB
CPU exec cap:    100%
HPET:            off
Chipset:         piix3
Firmware:        BIOS
Number of CPUs:  4
PAE:             off
Long Mode:       on
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode:  message and menu
Boot Device (1): DVD
Boot Device (2): HardDisk
Boot Device (3): Not Assigned
Boot Device (4): Not Assigned
ACPI:            on
IOAPIC:          on
Time offset:     0ms
RTC:             UTC
Hardw. virt.ext: on
Nested Paging:   on
Large Pages:     off
VT-x VPID:       on
VT-x unr. exec.: on
Paravirt. Provider: Default
State:           running (since 2017-06-21T12:29:56.898000000)
Monitor count:   1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Default Frontend:
Storage Controller Name (0):            IDE
Storage Controller Type (0):            PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0):  2
Storage Controller Port Count (0):      2
Storage Controller Bootable (0):        on
Storage Controller Name (1):            SATA
Storage Controller Type (1):            IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1):  30
Storage Controller Port Count (1):      7
Storage Controller Bootable (1):        on
Storage Controller Name (2):            USB
Storage Controller Type (2):            USB
Storage Controller Instance Number (2): 0
Storage Controller Max Port Count (2):  8
Storage Controller Port Count (2):      8
Storage Controller Bootable (2):        on
IDE (0, 0): Empty
SATA (0, 0): /home/cyclope/VirtualBox VMs/NET3UT03/NET3UT13.vdi (UUID: 
5a040863-20c3-4eeb-aace-8a3f8537b31a)
SATA (1, 0): /home/cyclope/VirtualBox VMs/NET3UT03/NET3UT03.vdi (UUID: 
fdfb0ad8-ee80-4048-bd35-e3ab0047599a)
SATA (2, 0): /home/cyclope/VirtualBox VMs/NET3UT03/NET3USV3.vdi (UUID: 
8ef1d464-914d-4c0e-889a-f059b0b1dfbb)
SATA (3, 0): /home/cyclope/VirtualBox VMs/NET3UT03/NET1UTCM.vdi (UUID: 
d0ba48a2-d445-43ec-9114-b382359362c0)
SATA (4, 0): /home/cyclope/VirtualBox VMs/GROUPE 
N12/NET1UB01/NET1EOLE.vdi (UUID: 9e63fd50-4230-48ea-b245-4b55a57488c3)
SATA (5, 0): /home/cyclope/VirtualBox VMs/NET3UT03/NET1UTSV.vdi (UUID: 
8103c09b-6699-4e02-9668-499eed8c7e4e)
SATA (6, 0): /home/cyclope/VirtualBox VMs/NET3UT03/N3U3SVGD.vdi (UUID: 
cb9ac931-217f-48fb-99f3-6a91b7634c63)
NIC 1:           MAC: 080027AA95B0, Attachment: Bridged Interface 
'enp5s0', Cable connected: on, Trace: off (file: none), Type: 82540EM, 
Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, 
Bandwidth group: none
NIC 2:           disabled
NIC 3:           disabled
NIC 4:           disabled
NIC 5:           disabled
NIC 6:           disabled
NIC 7:           disabled
NIC 8:           disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1:          disabled
UART 2:          disabled
UART 3:          disabled
UART 4:          disabled
LPT 1:           disabled
LPT 2:           disabled
Audio:           enabled (Driver: PulseAudio, Controller: AC97, Codec: 
AD1980)
Clipboard Mode:  disabled
Drag and drop Mode: disabled
Session name:    GUI/Qt
Video mode:      1704x895x32 at 0,0 enabled
VRDE:            disabled
USB:             enabled
EHCI:            disabled
XHCI:            disabled

USB Device Filters:

Index:            0
Active:           no
Name:             SanDisk Extreme [0010]
VendorId:         0781
ProductId:        5580
Revision:         0010
Manufacturer:     SanDisk
Product:          Extreme
Remote:           0
Serial Number:    AA011222142253430024

Index:            1
Active:           no
Name:             SanDisk Extreme [0010]
VendorId:         0781
ProductId:        5580
Revision:         0010
Manufacturer:     SanDisk
Product:          Extreme
Remote:           0
Serial Number:    AA011017141412401862

Available remote USB devices:

<none>

Currently Attached USB Devices:

<none>

Bandwidth groups:  <none>

Shared folders:

Name: 'VMHOST', Host path: '/media/ARES-DATA/VBXSH/DEBSYS/MT' (machine 
mapping), readonly

VRDE Connection:    not active
Clients so far:     0

Video capturing:    not active
Capture screens:    0
Capture file:       /home/cyclope/VirtualBox VMs/NET3UT03/NET3UT03.webm
Capture dimensions: 1024x768
Capture rate:       512 kbps
Capture FPS:        25

Description:
Machine de test avec:
- 1 système 8Go LTS 16.04 (Xenial): N3UU3(maître) sur NET3UT13.vdi
- 1 système 8Go LTS 16.04 (Xenial): N3UT3 sur NET3UT03.vdi
- 1 système 6,5Go LTS 16.04 (Xenial) N3UB3 (home intégré), swap 2Go sur 
NET3USV3.vdi
- 1 système 6,5Go 17.04 TCMN (4.10.0-21 Zesty à jour ulysse) sur 
NET1UTCM.vdi
- 1 système 7Go, 32, ext3 EOLE (Trusty) sur NET1EOLE.vdi
- 1 disque 6,5Go tCMN de sauvegarde de N3UB3 d'origine (hostname=N3UB3) 
sur NET1UTSV.vdi
- 1 disque 24Go SVGD-DATA sur N3U3SVGD.vdi
Guest:

Configured memory balloon size:      0 MB
OS type:                             Linux26_64
Additions run level:                 2
Additions version:                   5.0.40_Ubuntu r115130


Guest Facilities:

Facility "VirtualBox Base Driver": active/running (last update: 
2017/06/21 12:30:19 UTC)
Facility "VirtualBox System Service": active/running (last update: 
2017/06/21 12:31:55 UTC)
Facility "Seamless Mode": active/running (last update: 2017/06/21 
12:30:19 UTC)
Facility "Graphics Mode": active/running (last update: 2017/06/21 
12:30:19 UTC)


===========================================
Le 20/06/2017 à 15:19, LocutusOfBorg a écrit :
> I moved in my Debian VM the OS SATA slot from 0 to 5, and tried to run the VM.
> The startup completed successfully
>

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1698357

Title:
  package virtualbox-ext-pack 5.1.22-2~17.04.1 failed to
  install/upgrade: le sous-processus script post-installation installé a
  retourné une erreur de sortie d'état 4

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/virtualbox-ext-pack/+bug/1698357/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to