Public bug reported:
[Impact]
Early ThunderX silicon may hang when initializing the SATA controller.
[Test Case]
This was found in a reboot loop.
The latest ThunderX2 firmware (3.1) enables hardware error interrupts and
when the reset fix fails, we get a hang with the print:
[ 14.839308] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224
GiB)
[ 14.846796] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 14.852036] sd 1:0:0:0: [sdb] Write Protect is off
[ 14.856843] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 14.866022] ata2.00: Enabling discard_zeroes_data
*** NBU BAR Error 0x1e25c ***
AddrLo 0x1d80180 AddrHi 0x0
[Regression Risk]
The fix is only compiled in on arm64, and only activated at runtime on this
specific revision of silicon, so regression risk will be limited to a single
platform that is only being distributed for development purposes.
** Affects: linux (Ubuntu)
Importance: Undecided
Assignee: dann frazier (dannf)
Status: In Progress
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1724117
Title:
thunderx2 ahci errata workaround needs additional delays
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1724117/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
