the networking is configured via systemd-networkd.
bonding module is loaded with 'max_bonds=0' to address upcoming systemd change
https://github.com/systemd/systemd/issues/6184
pre-upgrade:
# networkctl
IDX LINK TYPE OPERATIONAL SETUP
1 lo loopback carrier unmanaged
2 eth0 ether carrier configuring
3 eth1 ether carrier configuring
4 bond0 ether routable configured
5 bond0.200 ether routable configured
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0
state UP mode DEFAULT group default qlen 1000
link/ether 5a:42:ff:c5:26:61 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0
state UP mode DEFAULT group default qlen 1000
link/ether 5a:42:ff:c5:26:61 brd ff:ff:ff:ff:ff:ff
4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc noqueue state
UP mode DEFAULT group default qlen 1000
link/ether 5a:42:ff:c5:26:61 brd ff:ff:ff:ff:ff:ff
5: bond0.200@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 5a:42:ff:c5:26:61 brd ff:ff:ff:ff:ff:ff
interfaces(.d) and netplan are empty and unused/disabled
/etc/systemd/network:
# cat eth1.network
[Match]
Name=eth1
[Network]
Bond=bond0
# cat eth0.network
[Match]
Name=eth0
[Network]
Bond=bond0
# cat bond0.netdev
[NetDev]
Name=bond0
Kind=bond
[Bond]
Mode=802.3ad
MIIMonitorSec=0.1s
LACPTransmitRate=fast
UpDelaySec=0.2s
DownDelaySec=0.2s
# cat bond0.network
[Match]
Name=bond0
[Address]
Address=192.168.1.100/24
[Route]
Gateway=192.168.1.1
[Network]
VLAN=bond0.200
[Link]
MTUBytes=9000
# cat bond0.200.netdev
[NetDev]
Name=bond0.200
Kind=vlan
[VLAN]
Id=200
# cat bond0.200.network
[Match]
Name=bond0.200
[Address]
Address=10.10.0.100/16
[Route]
Gateway=10.10.0.1
[Link]
MTUBytes=9000
After upgrade:
# networkctl
IDX LINK TYPE OPERATIONAL SETUP
1 lo loopback carrier unmanaged
2 eth0 ether carrier configuring
3 eth1 ether carrier configuring
4 bond0 ether routable configured
5 bond0.200 ether routable configured
However, the link of eth0, eth1 and the bond and vlan interface changes
to NOARP
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,NOARP,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master
bond0 state UP mode DEFAULT group default qlen 1000
link/ether 5a:42:ff:c5:26:61 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,NOARP,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master
bond0 state UP mode DEFAULT group default qlen 1000
link/ether 5a:42:ff:c5:26:61 brd ff:ff:ff:ff:ff:ff
4: bond0: <BROADCAST,MULTICAST,NOARP,MASTER,UP,LOWER_UP> mtu 9000 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 5a:42:ff:c5:26:61 brd ff:ff:ff:ff:ff:ff
5: bond0.200@bond0: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP mode DEFAULT group default qlen 1000
link/ether 5a:42:ff:c5:26:61 brd ff:ff:ff:ff:ff:ff
** Bug watch added: github.com/systemd/systemd/issues #6184
https://github.com/systemd/systemd/issues/6184
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1727301
Title:
229-4ubuntu20 added ARP option breaks existing bonding interfaces
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1727301/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
