hello,
the same problem with my vaio vgn-fs115b laptop with intel i915, ddcprobe,
xresprobe and get-edid fails too.
I can't set no other resoulution as 1280x800 :-(
ddcprobe
vbe: VESA 3.0 detected.
oem: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
vendor: Intel Corporation
product: Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0
memory: 7872kb
mode: 1280x1024x256
mode: 1280x1024x64k
mode: 1280x1024x16m
mode: 1024x768x256
mode: 1024x768x64k
mode: 1024x768x16m
mode: 640x480x16m
mode: 800x600x64k
mode: 800x600x16m
mode: 640x480x256
mode: 800x600x256
mode: 640x480x64k
edid:
edidfail
xresprobe i915
id:
res:
freq:
disptype: lcd/lvds
parse-edid: parse-edid version 1.4.1
get-edid: get-edid version 1.4.1
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0x11110 "Intel(r)915GM/910ML/915MS Graphics Chip
Accelerated VGA BIOS"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed
The EDID data should not be trusted as the VBE call failed
parse-edid: EDID checksum passed.
# EDID version 0 revision 0
Section "Monitor"
# Block type: 2:0 3:0
# Block type: 2:0 3:0
# Block type: 2:0 3:0
# Block type: 2:0 3:0
Identifier "@@@:0000"
VendorName "@@@"
ModelName "@@@:0000"
# Block type: 2:0 3:0
# Block type: 2:0 3:0
# Block type: 2:0 3:0
# Block type: 2:0 3:0
# DPMS capabilities: Active off:no Suspend:no Standby:no
# Block type: 2:0 3:0
# Block type: 2:0 3:0
# Block type: 2:0 3:0
# Block type: 2:0 3:0
EndSection
--
Incorrect resolution in usplash.conf (no output)
https://bugs.launchpad.net/bugs/127414
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
