Thanks a lot. After apw's comment on IRC I expected something in the
next weeks :-)
I can just tell you it boots and seems to work. When I tried to manually
build my hw-support-dkms against the kernel I got:
LANG=C ./r
+ pwd
+ make -C /usr/src/linux-headers-4.4.0-112-generic M=/home/glg/mod
make: Entering directory `/usr/src/linux-headers-4.4.0-112-generic'
Makefile:702: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG:
-fstack-protector-strong not supported by compiler
CC [M] /home/glg/mod/fujitsu-laptop.o
gcc: error: unrecognized command line option '-fstack-protector-strong'
make[1]: *** [/home/glg/mod/fujitsu-laptop.o] Error 1
make: *** [_module_/home/glg/mod] Error 2
make: Leaving directory `/usr/src/linux-headers-4.4.0-112-generic'
So I guess this kernel was build on Xenial, which I don't have
installed. I have Trusty and Bionic, which has the upstream patch
included.
But generally it looks ok'ish, as rfkill-any shows up:
$ cat /sys/class/leds/input2\:\:capslock/trigger
none rfkill-any kbd-scrolllock kbd-numlock [kbd-capslock] kbd-kanalock
kbd-shiftlock kbd-altgrlock kbd-ctrllock kbd-altlock kbd-shiftllock
kbd-shiftrlock kbd-ctrlllock kbd-ctrlrlock AC-online CMB1-charging-or-full
CMB1-charging CMB1-full CMB1-charging-blink-full-solid usb-gadget usb-host cpu0
cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7 mmc0 rfkill0 rfkill1 phy0rx phy0tx phy0assoc
phy0radio
For a test I used the the caspslock led and manually set the soft
rfkill, which triggers the led correctly:
$ echo "rfkill-any" | sudo tee /sys/class/leds/input2\:\:capslock/trigger
rfkill-any
$ cat /sys/class/leds/input2\:\:capslock/trigger
none [rfkill-any] kbd-scrolllock kbd-numlock kbd-capslock kbd-kanalock
kbd-shiftlock kbd-altgrlock kbd-ctrllock kbd-altlock kbd-shiftllock
kbd-shiftrlock kbd-ctrlllock kbd-ctrlrlock AC-online CMB1-charging-or-full
CMB1-charging CMB1-full CMB1-charging-blink-full-solid usb-gadget usb-host cpu0
cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7 mmc0 rfkill0 rfkill1 phy0rx phy0tx phy0assoc
phy0radio
=> capslock led is on
$ sudo rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
$ sudo rfkill block 0
$ sudo rfkill block 1
=> capslock led is off
I tried all combinations of block and unblock.
No stacks in the dmesg.
So I guess it works as expected.
If you can provide a Trusty based kernel, I'll test it tomorrow.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1745130
Title:
Support rfkill-any led trigger for Fujitsu u727
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1745130/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
