Last login: Fri Jul 6 07:49:13 2018 from 192.168.0.58
user@OptiPlex-580:~$ uname -a
Linux OptiPlex-580 4.18.0-041800rc3-generic #201807012030 SMP Mon Jul 2
00:33:15 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
user@OptiPlex-580:~$ dmesg
[ 0.000000] Linux version 4.18.0-041800rc3-generic (kernel@tangerine) (gcc
version 7.3.0 (Ubuntu 7.3.0-24ubuntu1)) #201807012030 SMP Mon Jul 2 00:33:15
UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.0-041800rc3-generic
root=UUID=11ce9123-025c-4420-ba85-dee2799c0a2f ro rootflags=subvol=@ quiet
splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfd4ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfd50000-0x00000000cfd5dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfd5e000-0x00000000cfda7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfda8000-0x00000000cfddffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cfdec000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 580/0YKH50, BIOS A05 06/16/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xcfd50 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at
[(____ptrval____)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 93000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0815a000, 0x0815afff] PGTABLE
[ 0.000000] BRK [0x0815b000, 0x0815bfff] PGTABLE
[ 0.000000] BRK [0x0815c000, 0x0815cfff] PGTABLE
[ 0.000000] BRK [0x0815d000, 0x0815dfff] PGTABLE
[ 0.000000] BRK [0x0815e000, 0x0815efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31a77000-0x34d32fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FAD00 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000CFD50000 000040 (v01 DELL MC09
20110616 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CFD50200 000084 (v01 DELL MC09
20110616 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has
valid Length but zero Address: 0x0000000000000000/0x1 (20180531/tbfadt-624)
[ 0.000000] ACPI: DSDT 0x00000000CFD507C0 00600E (v01 D4330 D4330A05
00000A05 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CFD5E000 000040
[ 0.000000] ACPI: APIC 0x00000000CFD50390 00007C (v01 DELL MC09
20110616 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CFD50410 00003C (v01 DELL MC09
20110616 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000CFD50450 000176 (v01 DELL MC09
20110616 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CFD5E040 000072 (v01 DELL MC09
20110616 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CFD5A7C0 000038 (v01 DELL MC09
20110616 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000CFD5A800 000672 (v01 A M I POWERNOW
00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11ffd3000-0x11fffdfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000098fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfd4ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
[ 0.000000] On node 0 totalpages: 982248
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3992 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13238 pages used for memmap
[ 0.000000] DMA32 zone: 847184 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 792 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 3 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfd50000-0xcfd5dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfd5e000-0xcfda7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfda8000-0xcfddffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfde0000-0xcfdebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfdec000-0xcfefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] [mem 0xcff00000-0xffefffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a
with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6
nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192
d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 966877
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/vmlinuz-4.18.0-041800rc3-generic
root=UUID=11ce9123-025c-4420-ba85-dee2799c0a2f ro rootflags=subvol=@ quiet
splash vt.handoff=1
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff]
(65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 3654628K/3928992K available (12300K kernel code, 2632K
rwdata, 4348K rodata, 2432K init, 2336K bss, 274364K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] ftrace: allocating 40699 entries in 159 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 524544, nr_irqs: 472, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 2600.351 MHz processor
[ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles:
0x257b87d5d9e, max_idle_ns: 440795262984 ns
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5200.70 BogoMIPS (lpj=10401404)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.024000] CPU: Physical Processor ID: 0
[ 0.024000] CPU: Processor Core ID: 0
[ 0.024000] mce: CPU supports 6 MCE banks
[ 0.024000] LVT offset 0 assigned for vector 0xf9
[ 0.024000] process: using AMD E400 aware idle routine
[ 0.024000] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.024000] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.024000] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.024000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.024000] Freeing SMP alternatives memory: 36K
[ 0.028006] process: System has AMD C1E enabled
[ 0.032000] process: Switch to broadcast mode on CPU0
[ 0.032000] smpboot: CPU0: AMD Phenom(tm) II X3 710 Processor (family: 0x10,
model: 0x4, stepping: 0x2)
[ 0.032000] Performance Events: AMD PMU driver.
[ 0.032000] ... version: 0
[ 0.032000] ... bit width: 48
[ 0.032000] ... generic registers: 4
[ 0.032000] ... value mask: 0000ffffffffffff
[ 0.032000] ... max period: 00007fffffffffff
[ 0.032000] ... fixed-purpose events: 0
[ 0.032000] ... event mask: 000000000000000f
[ 0.032000] Hierarchical SRCU implementation.
[ 0.032000] smp: Bringing up secondary CPUs ...
[ 0.032000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.032000] x86: Booting SMP configuration:
[ 0.032000] .... node #0, CPUs: #1
[ 0.004000] process: Switch to broadcast mode on CPU1
[ 0.032000] #2
[ 0.004000] process: Switch to broadcast mode on CPU2
[ 0.034378] smp: Brought up 1 node, 3 CPUs
[ 0.034378] smpboot: Max logical packages: 2
[ 0.034378] smpboot: Total of 3 processors activated (15602.10 BogoMIPS)
[ 0.036302] devtmpfs: initialized
[ 0.036302] x86/mm: Memory block size: 128MB
[ 0.036519] PM: Registering ACPI NVS region [mem 0xcfd5e000-0xcfda7fff]
(303104 bytes)
[ 0.036519] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.036519] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.036519] pinctrl core: initialized pinctrl subsystem
[ 0.036519] RTC time: 5:58:51, date: 07/06/18
[ 0.036519] NET: Registered protocol family 16
[ 0.036519] audit: initializing netlink subsys (disabled)
[ 0.036519] audit: type=2000 audit(1530856731.036:1): state=initialized
audit_enabled=0 res=1
[ 0.036519] cpuidle: using governor ladder
[ 0.036519] cpuidle: using governor menu
[ 0.036519] node 0 link 0: io port [1000, ffffff]
[ 0.036519] TOM: 00000000d0000000 aka 3328M
[ 0.036519] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.036519] node 0 link 0: mmio [a0000, bffff]
[ 0.036519] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.036519] node 0 link 0: mmio [f0000000, fe7fffff]
[ 0.036519] node 0 link 0: mmio [fe800000, fe9fffff]
[ 0.036519] node 0 link 0: mmio [fea00000, ffefffff]
[ 0.036519] TOM2: 0000000130000000 aka 4864M
[ 0.036519] bus: [bus 00-07] on node 0 link 0
[ 0.036519] bus: 00 [io 0x0000-0xffff]
[ 0.036519] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.036519] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.036519] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.036519] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.036519] ACPI: bus type PCI registered
[ 0.036519] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.036519] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.036519] PCI: not using MMCONFIG
[ 0.036519] PCI: Using configuration type 1 for base access
[ 0.036519] PCI: Using configuration type 1 for extended access
[ 0.040128] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.040128] mtrr: probably your BIOS does not setup all CPUs.
[ 0.040129] mtrr: corrected configuration.
[ 0.041298] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.041298] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.041298] ACPI: Added _OSI(Module Device)
[ 0.041298] ACPI: Added _OSI(Processor Device)
[ 0.041298] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.041298] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.041298] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.046780] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.048904] ACPI: Interpreter enabled
[ 0.048925] ACPI: (supports S0 S1 S4 S5)
[ 0.048927] ACPI: Using IOAPIC for interrupt routing
[ 0.048965] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.050419] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
[ 0.050435] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.050700] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.061983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.061989] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.061994] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.062381] PCI host bridge to bus 0000:00
[ 0.062384] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.062385] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.062387] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.062388] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff
window]
[ 0.062390] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff
window]
[ 0.062391] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff
window]
[ 0.062393] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.062402] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[ 0.062524] pci 0000:00:01.0: [1028:9602] type 01 class 0x060400
[ 0.062635] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.062651] pci 0000:00:04.0: enabling Extended Tags
[ 0.062672] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.062773] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[ 0.062788] pci 0000:00:09.0: enabling Extended Tags
[ 0.062809] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.062920] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.062940] pci 0000:00:11.0: reg 0x10: [io 0xd000-0xd007]
[ 0.062948] pci 0000:00:11.0: reg 0x14: [io 0xc000-0xc003]
[ 0.062957] pci 0000:00:11.0: reg 0x18: [io 0xb000-0xb007]
[ 0.062965] pci 0000:00:11.0: reg 0x1c: [io 0xa000-0xa003]
[ 0.062973] pci 0000:00:11.0: reg 0x20: [io 0x9000-0x900f]
[ 0.062982] pci 0000:00:11.0: reg 0x24: [mem 0xfe7ffc00-0xfe7fffff]
[ 0.063110] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.063127] pci 0000:00:12.0: reg 0x10: [mem 0xfe7fe000-0xfe7fefff]
[ 0.063271] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.063288] pci 0000:00:12.1: reg 0x10: [mem 0xfe7fd000-0xfe7fdfff]
[ 0.063431] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.063451] pci 0000:00:12.2: reg 0x10: [mem 0xfe7ff800-0xfe7ff8ff]
[ 0.063525] pci 0000:00:12.2: supports D1 D2
[ 0.063527] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.063631] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.063648] pci 0000:00:13.0: reg 0x10: [mem 0xfe7fc000-0xfe7fcfff]
[ 0.063788] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.063804] pci 0000:00:13.1: reg 0x10: [mem 0xfe7f7000-0xfe7f7fff]
[ 0.063951] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.063970] pci 0000:00:13.2: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff]
[ 0.064058] pci 0000:00:13.2: supports D1 D2
[ 0.064059] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.064167] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.064340] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.064359] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.064367] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.064375] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.064383] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.064392] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.064410] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.064411] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.064413] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.064414] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.064529] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.064551] pci 0000:00:14.2: reg 0x10: [mem 0xfe7f0000-0xfe7f3fff 64bit]
[ 0.064614] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.064708] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.064864] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.064993] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.065010] pci 0000:00:14.5: reg 0x10: [mem 0xfe7f6000-0xfe7f6fff]
[ 0.065154] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.065240] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.065322] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.065403] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.065486] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.065585] pci_bus 0000:01: extended config space not accessible
[ 0.065621] pci 0000:01:05.0: [1002:9710] type 00 class 0x030000
[ 0.065628] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.065631] pci 0000:01:05.0: reg 0x14: [io 0xe000-0xe0ff]
[ 0.065635] pci 0000:01:05.0: reg 0x18: [mem 0xfe9f0000-0xfe9fffff]
[ 0.065643] pci 0000:01:05.0: reg 0x24: [mem 0xfe800000-0xfe8fffff]
[ 0.065661] pci 0000:01:05.0: supports D1 D2
[ 0.065724] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.065727] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.065729] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.065732] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.065778] pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.065812] pci 0000:02:00.0: reg 0x10: [mem 0xfeafe000-0xfeafffff 64bit]
[ 0.065939] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.066033] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.066036] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.066077] pci 0000:03:00.0: [14e4:1681] type 00 class 0x020000
[ 0.066104] pci 0000:03:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit]
[ 0.066117] pci 0000:03:00.0: reg 0x18: [mem 0xfebe0000-0xfebeffff 64bit]
[ 0.066146] pci 0000:03:00.0: enabling Extended Tags
[ 0.066213] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.066298] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 0.066302] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.066317] pci_bus 0000:04: extended config space not accessible
[ 0.066382] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.066390] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window]
(subtractive decode)
[ 0.066391] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window]
(subtractive decode)
[ 0.066393] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff
window] (subtractive decode)
[ 0.066394] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff
window] (subtractive decode)
[ 0.066396] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff
window] (subtractive decode)
[ 0.066397] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff
window] (subtractive decode)
[ 0.067336] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 12 14 15)
[ 0.067404] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *9 12 14 15)
[ 0.067473] ACPI: PCI Interrupt Link [LNKC] (IRQs *4 7 9 12 14 15)
[ 0.067541] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 9 *10 12 14 15)
[ 0.067610] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 12 14 15) *0,
disabled.
[ 0.067679] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 12 14 15) *0,
disabled.
[ 0.067747] ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
[ 0.067814] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 12 14 15) *0,
disabled.
[ 0.067944] pci 0000:01:05.0: vgaarb: setting as boot VGA device
[ 0.067944] pci 0000:01:05.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.067944] pci 0000:01:05.0: vgaarb: bridge control possible
[ 0.067944] vgaarb: loaded
[ 0.068175] SCSI subsystem initialized
[ 0.068189] libata version 3.00 loaded.
[ 0.068189] ACPI: bus type USB registered
[ 0.068189] usbcore: registered new interface driver usbfs
[ 0.068189] usbcore: registered new interface driver hub
[ 0.068189] usbcore: registered new device driver usb
[ 0.068189] pps_core: LinuxPPS API ver. 1 registered
[ 0.068189] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 0.068189] PTP clock support registered
[ 0.068189] EDAC MC: Ver: 3.0.0
[ 0.068189] PCI: Using ACPI for IRQ routing
[ 0.076729] PCI: pci_cache_line_size set to 64 bytes
[ 0.076778] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
[ 0.076780] e820: reserve RAM buffer [mem 0xcfd50000-0xcfffffff]
[ 0.076886] NetLabel: Initializing
[ 0.076887] NetLabel: domain hash size = 128
[ 0.076887] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.076903] NetLabel: unlabeled traffic allowed by default
[ 0.076920] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.076920] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.078140] clocksource: Switched to clocksource tsc-early
[ 0.091359] VFS: Disk quotas dquot_6.6.0
[ 0.091376] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.091500] AppArmor: AppArmor Filesystem Enabled
[ 0.091531] pnp: PnP ACPI init
[ 0.091772] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.091848] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.093273] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.093430] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.093432] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.093436] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.093698] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.093700] system 00:04: [io 0x040b] has been reserved
[ 0.093701] system 00:04: [io 0x04d6] has been reserved
[ 0.093703] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.093704] system 00:04: [io 0x0c14] has been reserved
[ 0.093706] system 00:04: [io 0x0c50-0x0c51] has been reserved
[ 0.093707] system 00:04: [io 0x0c52] has been reserved
[ 0.093708] system 00:04: [io 0x0c6c] has been reserved
[ 0.093710] system 00:04: [io 0x0c6f] has been reserved
[ 0.093711] system 00:04: [io 0x0cd0-0x0cd1] has been reserved
[ 0.093712] system 00:04: [io 0x0cd2-0x0cd3] has been reserved
[ 0.093714] system 00:04: [io 0x0cd4-0x0cd5] has been reserved
[ 0.093715] system 00:04: [io 0x0cd6-0x0cd7] has been reserved
[ 0.093717] system 00:04: [io 0x0cd8-0x0cdf] has been reserved
[ 0.093718] system 00:04: [io 0x0800-0x089f] has been reserved
[ 0.093719] system 00:04: [io 0x0b00-0x0b0f] has been reserved
[ 0.093721] system 00:04: [io 0x0b20-0x0b3f] has been reserved
[ 0.093722] system 00:04: [io 0x0900-0x090f] has been reserved
[ 0.093723] system 00:04: [io 0x0910-0x091f] has been reserved
[ 0.093725] system 00:04: [io 0xfe00-0xfefe] has been reserved
[ 0.093727] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.093729] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.093733] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.094087] system 00:05: [io 0x0e00-0x0e3e] has been reserved
[ 0.094088] system 00:05: [io 0x0778-0x077f] has been reserved
[ 0.094090] system 00:05: [io 0x0500-0x050f] has been reserved
[ 0.094093] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.094181] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.094184] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.094391] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.094392] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.094394] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.094396] system 00:07: [mem 0x00100000-0xcfefffff] could not be reserved
[ 0.094397] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.094400] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.094545] pnp: PnP ACPI: found 8 devices
[ 0.100595] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.100617] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.100620] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.100622] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.100624] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.100627] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.100630] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.100633] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 0.100635] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.100639] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.100651] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.100653] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.100654] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.100656] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.100657] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff window]
[ 0.100658] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.100660] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.100661] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.100662] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.100664] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.100666] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.100668] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.100669] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.100671] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.100672] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.100673] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xdfffffff window]
[ 0.100675] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.100758] NET: Registered protocol family 2
[ 0.101003] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3,
32768 bytes)
[ 0.101029] TCP established hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.101127] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.101281] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.101337] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.101366] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.101433] NET: Registered protocol family 1
[ 0.101441] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.229349] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c0 took 124889
usecs
[ 0.313334] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x6c0 took 82006
usecs
[ 0.397325] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c0 took 81817
usecs
[ 0.481325] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x6c0 took 82021
usecs
[ 0.565309] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6c0 took 81802
usecs
[ 0.565328] pci 0000:01:05.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.565501] PCI: CLS 64 bytes, default 64
[ 0.565543] Unpacking initramfs...
[ 0.976837] random: fast init done
[ 1.414238] Freeing initrd memory: 51952K
[ 1.414749] PCI-DMA: Disabling AGP.
[ 1.414823] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.414823] PCI-DMA: using GART IOMMU.
[ 1.414825] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.417910] LVT offset 1 assigned for vector 0x400
[ 1.417917] LVT offset 1 assigned
[ 1.418027] perf: AMD IBS detected (0x0000001f)
[ 1.418083] Scanning for low memory corruption every 60 seconds
[ 1.418723] Initialise system trusted keyrings
[ 1.418731] Key type blacklist registered
[ 1.418803] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.420250] zbud: loaded
[ 1.420730] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.420971] fuse init (API version 7.27)
[ 1.421035] pstore: using deflate compression
[ 1.422761] Key type asymmetric registered
[ 1.422763] Asymmetric key parser 'x509' registered
[ 1.422818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
244)
[ 1.422861] io scheduler noop registered
[ 1.422862] io scheduler deadline registered
[ 1.422912] io scheduler cfq registered (default)
[ 1.423311] vesafb: mode is 640x480x16, linelength=1280, pages=0
[ 1.423312] vesafb: scrolling: redraw
[ 1.423313] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.423323] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____),
using 640k, total 640k
[ 1.442393] Console: switching to colour frame buffer device 80x30
[ 1.461338] fb0: VESA VGA frame buffer device
[ 1.461422] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.461436] ACPI: Power Button [PWRB]
[ 1.461470] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.461477] ACPI: Power Button [PWRF]
[ 1.461509] ACPI: ACPI: processor limited to max C-state 1
[ 1.461871] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.463671] Linux agpgart interface v0.103
[ 1.465273] loop: module loaded
[ 1.465634] libphy: Fixed MDIO Bus: probed
[ 1.465636] tun: Universal TUN/TAP device driver, 1.6
[ 1.465674] PPP generic driver version 2.4.2
[ 1.465713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.465722] ehci-pci: EHCI PCI platform driver
[ 1.465868] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.465876] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 1.465881] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 1.465890] ehci-pci 0000:00:12.2: debug port 1
[ 1.465935] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe7ff800
[ 1.480375] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.480419] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.18
[ 1.480421] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.480422] usb usb1: Product: EHCI Host Controller
[ 1.480423] usb usb1: Manufacturer: Linux 4.18.0-041800rc3-generic ehci_hcd
[ 1.480424] usb usb1: SerialNumber: 0000:00:12.2
[ 1.480532] hub 1-0:1.0: USB hub found
[ 1.480538] hub 1-0:1.0: 6 ports detected
[ 1.480826] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.480831] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 1.480833] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI
dummy qh workaround
[ 1.480842] ehci-pci 0000:00:13.2: debug port 1
[ 1.480874] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe7ff400
[ 1.496379] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.496432] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.18
[ 1.496433] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.496434] usb usb2: Product: EHCI Host Controller
[ 1.496435] usb usb2: Manufacturer: Linux 4.18.0-041800rc3-generic ehci_hcd
[ 1.496437] usb usb2: SerialNumber: 0000:00:13.2
[ 1.496515] hub 2-0:1.0: USB hub found
[ 1.496521] hub 2-0:1.0: 6 ports detected
[ 1.496672] ehci-platform: EHCI generic platform driver
[ 1.496679] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.496682] ohci-pci: OHCI PCI platform driver
[ 1.496805] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.496810] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus
number 3
[ 1.496834] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe7fe000
[ 1.560404] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.18
[ 1.560406] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.560407] usb usb3: Product: OHCI PCI host controller
[ 1.560408] usb usb3: Manufacturer: Linux 4.18.0-041800rc3-generic ohci_hcd
[ 1.560409] usb usb3: SerialNumber: 0000:00:12.0
[ 1.560507] hub 3-0:1.0: USB hub found
[ 1.560514] hub 3-0:1.0: 3 ports detected
[ 1.560737] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.560741] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus
number 4
[ 1.560758] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe7fd000
[ 1.624402] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.18
[ 1.624403] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.624404] usb usb4: Product: OHCI PCI host controller
[ 1.624406] usb usb4: Manufacturer: Linux 4.18.0-041800rc3-generic ohci_hcd
[ 1.624407] usb usb4: SerialNumber: 0000:00:12.1
[ 1.624508] hub 4-0:1.0: USB hub found
[ 1.624515] hub 4-0:1.0: 3 ports detected
[ 1.624749] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.624755] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus
number 5
[ 1.624780] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe7fc000
[ 1.688400] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.18
[ 1.688402] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.688403] usb usb5: Product: OHCI PCI host controller
[ 1.688404] usb usb5: Manufacturer: Linux 4.18.0-041800rc3-generic ohci_hcd
[ 1.688405] usb usb5: SerialNumber: 0000:00:13.0
[ 1.688491] hub 5-0:1.0: USB hub found
[ 1.688498] hub 5-0:1.0: 3 ports detected
[ 1.688718] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.688723] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus
number 6
[ 1.688739] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe7f7000
[ 1.752402] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.18
[ 1.752403] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.752404] usb usb6: Product: OHCI PCI host controller
[ 1.752405] usb usb6: Manufacturer: Linux 4.18.0-041800rc3-generic ohci_hcd
[ 1.752406] usb usb6: SerialNumber: 0000:00:13.1
[ 1.752506] hub 6-0:1.0: USB hub found
[ 1.752513] hub 6-0:1.0: 3 ports detected
[ 1.752745] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.752749] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus
number 7
[ 1.752764] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe7f6000
[ 1.816399] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 4.18
[ 1.816401] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.816402] usb usb7: Product: OHCI PCI host controller
[ 1.816403] usb usb7: Manufacturer: Linux 4.18.0-041800rc3-generic ohci_hcd
[ 1.816404] usb usb7: SerialNumber: 0000:00:14.5
[ 1.816503] hub 7-0:1.0: USB hub found
[ 1.816511] hub 7-0:1.0: 2 ports detected
[ 1.816614] ohci-platform: OHCI generic platform driver
[ 1.816623] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.816708] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.816713] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 8
[ 1.821946] xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci version 0x100
quirks 0x0000000100000090
[ 1.822129] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.18
[ 1.822131] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.822132] usb usb8: Product: xHCI Host Controller
[ 1.822133] usb usb8: Manufacturer: Linux 4.18.0-041800rc3-generic xhci-hcd
[ 1.822134] usb usb8: SerialNumber: 0000:02:00.0
[ 1.822233] hub 8-0:1.0: USB hub found
[ 1.822240] hub 8-0:1.0: 2 ports detected
[ 1.822333] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.822336] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 9
[ 1.822339] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 1.825479] usb usb9: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 1.825495] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 4.18
[ 1.825497] usb usb9: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.825498] usb usb9: Product: xHCI Host Controller
[ 1.825499] usb usb9: Manufacturer: Linux 4.18.0-041800rc3-generic xhci-hcd
[ 1.825500] usb usb9: SerialNumber: 0000:02:00.0
[ 1.825593] hub 9-0:1.0: USB hub found
[ 1.825600] hub 9-0:1.0: 2 ports detected
[ 1.825731] i8042: PNP: No PS/2 controller found.
[ 1.825732] i8042: Probing ports directly.
[ 1.829004] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.829007] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.829121] mousedev: PS/2 mouse device common for all mice
[ 1.829238] rtc_cmos 00:01: RTC can wake from S4
[ 1.829355] rtc_cmos 00:01: registered as rtc0
[ 1.829370] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram,
hpet irqs
[ 1.829377] i2c /dev entries driver
[ 1.829419] device-mapper: uevent: version 1.0.3
[ 1.829475] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised:
[email protected]
[ 1.829506] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.829875] NET: Registered protocol family 10
[ 1.833772] Segment Routing with IPv6
[ 1.833794] NET: Registered protocol family 17
[ 1.833834] Key type dns_resolver registered
[ 1.834037] RAS: Correctable Errors collector initialized.
[ 1.834064] microcode: microcode updated early to new patch_level=0x010000db
[ 1.834086] microcode: CPU0: patch_level=0x010000db
[ 1.834093] microcode: CPU1: patch_level=0x010000db
[ 1.834100] microcode: CPU2: patch_level=0x010000db
[ 1.834129] microcode: Microcode Update Driver: v2.2.
[ 1.834138] sched_clock: Marking stable (1834124885, 0)->(1924633040,
-90508155)
[ 1.834285] registered taskstats version 1
[ 1.834293] Loading compiled-in X.509 certificates
[ 1.837290] Loaded X.509 cert 'Build time autogenerated kernel key:
2bbdac0a07c5d81f420872695c5779dd557512f3'
[ 1.837309] zswap: loaded using pool lzo/zbud
[ 1.840961] Key type big_key registered
[ 1.840965] Key type trusted registered
[ 1.842691] Key type encrypted registered
[ 1.842694] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.842702] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.842706] ima: Allocated hash algorithm: sha1
[ 1.842720] evm: Initialising EVM extended attributes:
[ 1.842720] evm: security.selinux
[ 1.842721] evm: security.SMACK64
[ 1.842721] evm: security.SMACK64EXEC
[ 1.842722] evm: security.SMACK64TRANSMUTE
[ 1.842722] evm: security.SMACK64MMAP
[ 1.842722] evm: security.apparmor
[ 1.842723] evm: security.ima
[ 1.842723] evm: security.capability
[ 1.842724] evm: HMAC attrs: 0x1
[ 1.843049] Magic number: 10:426:971
[ 1.843149] rtc_cmos 00:01: setting system clock to 2018-07-06 05:58:53 UTC
(1530856733)
[ 1.843265] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.846341] Freeing unused kernel memory: 2432K
[ 1.861391] Write protecting the kernel read-only data: 20480k
[ 1.862137] Freeing unused kernel memory: 2008K
[ 1.867080] Freeing unused kernel memory: 1796K
[ 1.879336] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.954708] tg3.c:v3.137 (May 11, 2014)
[ 1.964031] ahci 0000:00:11.0: version 3.0
[ 1.964310] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 1.964312] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part ccc
[ 1.967595] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 1.967763] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at
0xb20
[ 1.967842] scsi host1: pata_atiixp
[ 1.968022] scsi host2: pata_atiixp
[ 1.968054] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.968055] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.972120] scsi host0: ahci
[ 1.972841] scsi host3: ahci
[ 1.972945] scsi host4: ahci
[ 1.973046] scsi host5: ahci
[ 1.973140] scsi host6: ahci
[ 1.973243] scsi host7: ahci
[ 1.973283] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00
irq 22
[ 1.973285] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80
irq 22
[ 1.973287] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00
irq 22
[ 1.973289] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80
irq 22
[ 1.973291] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00
irq 22
[ 1.973293] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80
irq 22
[ 1.976442] tg3 0000:03:00.0 eth0: Tigon3 [partno(none) rev 5761100] (PCI
Express) MAC address 00:26:b9:87:44:51
[ 1.976445] tg3 0000:03:00.0 eth0: attached PHY is 5761 (10/100/1000Base-T
Ethernet) (WireSpeed[1], EEE[0])
[ 1.976446] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0]
TSOcap[1]
[ 1.976448] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.012017] usb 4-1: new low-speed USB device number 2 using ohci-pci
[ 2.012519] tg3 0000:03:00.0 enp3s0: renamed from eth0
[ 2.020845] [drm] radeon kernel modesetting enabled.
[ 2.020932] checking generic (d0000000 a0000) vs hw (d0000000 10000000)
[ 2.020933] fb: switching to radeondrmfb from VESA VGA
[ 2.020958] Console: switching to colour dummy device 80x25
[ 2.021266] [drm] initializing kernel modesetting (RS880 0x1002:0x9710
0x1028:0x0433 0x00).
[ 2.021289] resource sanity check: requesting [mem 0x000c0000-0x000dffff],
which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[ 2.021293] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs
[ 2.021865] ATOM BIOS: B43106
[ 2.021883] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 -
0x00000000CFFFFFFF (256M used)
[ 2.021884] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 -
0x00000000BFFFFFFF
[ 2.021888] [drm] Detected VRAM RAM=256M, BAR=256M
[ 2.021889] [drm] RAM width 32bits DDR
[ 2.021967] [TTM] Zone kernel: Available graphics memory: 1889402 kiB
[ 2.021967] [TTM] Initializing pool allocator
[ 2.021972] [TTM] Initializing DMA pool allocator
[ 2.021987] [drm] radeon: 256M of VRAM memory ready
[ 2.021988] [drm] radeon: 512M of GTT memory ready.
[ 2.021994] [drm] Loading RS780 Microcode
[ 2.022057] [drm] radeon: power management initialized
[ 2.022121] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.045639] [drm] PCIE GART of 512M enabled (table at 0x00000000C0146000).
[ 2.045687] radeon 0000:01:05.0: WB enabled
[ 2.045689] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr
0x00000000a0000c00 and cpu addr 0x(____ptrval____)
[ 2.047856] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr
0x00000000c0056038 and cpu addr 0x(____ptrval____)
[ 2.047857] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.047858] [drm] Driver supports precise vblank timestamp query.
[ 2.047859] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[ 2.047871] [drm] radeon: irq initialized.
[ 2.079667] [drm] ring test on 0 succeeded in 1 usecs
[ 2.120035] usb 6-1: new low-speed USB device number 2 using ohci-pci
[ 2.254324] [drm] ring test on 5 succeeded in 1 usecs
[ 2.254328] [drm] UVD initialized successfully.
[ 2.254429] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.286667] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.286720] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.286752] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.286780] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.318384] usb 6-1: New USB device found, idVendor=046a, idProduct=0023,
bcdDevice= 2.20
[ 2.318386] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.325218] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.347440] usbcore: registered new interface driver usbhid
[ 2.347441] usbhid: USB HID core driver
[ 2.351545] input: HID 046a:0023 as
/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/0003:046A:0023.0001/input/input5
[ 2.408478] cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11
Keyboard [HID 046a:0023] on usb-0000:00:13.1-1/input0
[ 2.408711] input: HID 046a:0023 as
/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/0003:046A:0023.0002/input/input6
[ 2.432380] tsc: Refined TSC clocksource calibration: 2600.181 MHz
[ 2.432386] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x257ae75203d, max_idle_ns: 440795321068 ns
[ 2.432400] clocksource: Switched to clocksource tsc
[ 2.446716] usb 4-1: New USB device found, idVendor=046d, idProduct=c077,
bcdDevice=72.00
[ 2.446717] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.446719] usb 4-1: Product: USB Optical Mouse
[ 2.446720] usb 4-1: Manufacturer: Logitech
[ 2.448399] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.449411] ata2.00: ATAPI: TSSTcorpDVD-ROM TS-L333A, DW20, max UDMA/33
[ 2.451637] ata2.00: configured for UDMA/33
[ 2.453940] input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:046D:C077.0003/input/input7
[ 2.468503] cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device
[HID 046a:0023] on usb-0000:00:13.1-1/input1
[ 2.468903] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11
Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.1-1/input0
[ 2.520385] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.571863] ata1.00: ATA-7: ST3808110AS, 3.AAE, max UDMA/133
[ 2.571864] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 32)
[ 2.576388] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 2.630178] ata1.00: configured for UDMA/133
[ 2.630355] scsi 0:0:0:0: Direct-Access ATA ST3808110AS E
PQ: 0 ANSI: 5
[ 2.630546] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 2.630551] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.630557] sd 0:0:0:0: [sda] Write Protect is off
[ 2.630558] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.630573] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.631886] scsi 3:0:0:0: CD-ROM TSSTcorp DVD-ROM TS-L333A DW20
PQ: 0 ANSI: 5
[ 2.694857] sr 3:0:0:0: [sr0] scsi3-mmc drive: 4x/24x cd/rw xa/form2 cdda
tray
[ 2.694859] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.695000] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.695076] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.696024] sda: sda1 sda2 sda3 < sda5 >
[ 2.696336] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.738326] usb 1-6: New USB device found, idVendor=0781, idProduct=5583,
bcdDevice= 1.00
[ 2.738328] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.738329] usb 1-6: Product: Ultra Fit
[ 2.738330] usb 1-6: Manufacturer: SanDisk
[ 2.738332] usb 1-6: SerialNumber: 4C531001640901110105
[ 2.884739] usb-storage 1-6:1.0: USB Mass Storage device detected
[ 2.884866] scsi host8: usb-storage 1-6:1.0
[ 2.884930] usbcore: registered new interface driver usb-storage
[ 2.886534] usbcore: registered new interface driver uas
[ 2.912397] [drm] ib test on ring 5 succeeded
[ 2.912878] [drm] Radeon Display Connectors
[ 2.912879] [drm] Connector 0:
[ 2.912880] [drm] VGA-1
[ 2.912881] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 2.912881] [drm] Encoders:
[ 2.912882] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.912883] [drm] Connector 1:
[ 2.912883] [drm] DP-1
[ 2.912883] [drm] HPD2
[ 2.912885] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c
0x7e6c
[ 2.912885] [drm] Encoders:
[ 2.912886] [drm] DFP1: INTERNAL_UNIPHY
[ 2.994381] [drm] fb mappable at 0xD0247000
[ 2.994382] [drm] vram apper at 0xD0000000
[ 2.994382] [drm] size 3145728
[ 2.994383] [drm] fb depth is 24
[ 2.994383] [drm] pitch is 4096
[ 2.994444] fbcon: radeondrmfb (fb0) is primary device
[ 3.020539] Console: switching to colour frame buffer device 128x48
[ 3.027214] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 3.040452] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on
minor 0
[ 3.418704] random: plymouthd: uninitialized urandom read (8 bytes read)
[ 3.418843] random: plymouthd: uninitialized urandom read (8 bytes read)
[ 3.508024] raid6: sse2x1 gen() 3610 MB/s
[ 3.576020] raid6: sse2x1 xor() 3573 MB/s
[ 3.644020] raid6: sse2x2 gen() 5598 MB/s
[ 3.712019] raid6: sse2x2 xor() 5865 MB/s
[ 3.780021] raid6: sse2x4 gen() 6673 MB/s
[ 3.848016] raid6: sse2x4 xor() 3063 MB/s
[ 3.848017] raid6: using algorithm sse2x4 gen() 6673 MB/s
[ 3.848017] raid6: .... xor() 3063 MB/s, rmw enabled
[ 3.848018] raid6: using intx1 recovery algorithm
[ 3.852229] xor: measuring software checksum speed
[ 3.892015] prefetch64-sse: 10011.000 MB/sec
[ 3.932015] generic_sse: 9620.000 MB/sec
[ 3.932016] xor: using function: prefetch64-sse (10011.000 MB/sec)
[ 3.932726] scsi 8:0:0:0: Direct-Access SanDisk Ultra Fit 1.00
PQ: 0 ANSI: 6
[ 3.933033] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 3.934700] sd 8:0:0:0: [sdb] 60062500 512-byte logical blocks: (30.8
GB/28.6 GiB)
[ 3.946205] sd 8:0:0:0: [sdb] Write Protect is off
[ 3.946207] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3.951331] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.955149] Btrfs loaded, crc32c=crc32c-generic
[ 3.959800] sdb: sdb1
[ 3.973301] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 4.420643] BTRFS: device fsid 11ce9123-025c-4420-ba85-dee2799c0a2f devid 1
transid 7754 /dev/sda2
[ 4.555082] BTRFS: device fsid 11ce9123-025c-4420-ba85-dee2799c0a2f devid 2
transid 7754 /dev/sdb1
[ 4.560957] BTRFS info (device sda2): disk space caching is enabled
[ 4.560958] BTRFS info (device sda2): has skinny extents
[ 5.569664] random: crng init done
[ 5.771468] systemd[1]: Failed to insert module 'autofs4': No such file or
directory
[ 5.875457] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2
default-hierarchy=hybrid)
[ 5.875580] systemd[1]: Detected architecture x86-64.
[ 5.890564] systemd[1]: Set hostname to <OptiPlex-580>.
[ 6.686708] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 6.686903] systemd[1]: Created slice System Slice.
[ 6.687030] systemd[1]: Listening on Journal Audit Socket.
[ 6.687102] systemd[1]: Listening on Journal Socket.
[ 6.687225] systemd[1]: Created slice User and Session Slice.
[ 6.687238] systemd[1]: Reached target Slices.
[ 6.687278] systemd[1]: Listening on udev Kernel Socket.
[ 6.968924] lp: driver loaded but no devices found
[ 7.062093] ppdev: user-space parallel port driver
[ 7.070204] parport_pc 00:02: reported by Plug and Play ACPI
[ 7.070254] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 7.095340] BTRFS info (device sda2): use lzo compression, level 0
[ 7.095344] BTRFS info (device sda2): disk space caching is enabled
[ 7.135490] systemd-journald[373]: Received request to flush runtime journal
from PID 1
[ 7.172454] lp0: using parport0 (interrupt-driven).
[ 8.562302] cryptd: max_cpu_qlen set to 1000
[ 10.324153] kvm: Nested Virtualization enabled
[ 10.324156] kvm: Nested Paging enabled
[ 10.508518] MCE: In-kernel MCE decoding enabled.
[ 10.516055] EDAC amd64: Node 0: DRAM ECC disabled.
[ 10.516057] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 10.556651] EDAC amd64: Node 0: DRAM ECC disabled.
[ 10.556653] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 11.335189] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 19.300382] Adding 7811068k swap on /dev/sda5. Priority:-2 extents:1
across:7811068k FS
[ 19.509123] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 20.392725] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready
0x411111f0
[ 20.393429] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB:
line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 20.393431] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1
(0x14/0x0/0x0/0x0/0x0)
[ 20.393433] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x1a/0x0/0x0/0x0/0x0)
[ 20.393434] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 20.393435] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 20.393446] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x19
[ 20.393448] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18
[ 20.402595] input: HDA ATI SB Rear Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 20.402651] input: HDA ATI SB Front Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 20.402700] input: HDA ATI SB Line Out as
/devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 20.402745] input: HDA ATI SB Front Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 21.031715] audit: type=1400 audit(1530856752.681:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=743
comm="apparmor_parser"
[ 21.031977] audit: type=1400 audit(1530856752.681:3): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=743
comm="apparmor_parser"
[ 21.032235] audit: type=1400 audit(1530856752.685:4): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=743 comm="apparmor_parser"
[ 21.032458] audit: type=1400 audit(1530856752.685:5): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=743 comm="apparmor_parser"
[ 21.139089] audit: type=1400 audit(1530856752.789:6): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=744 comm="apparmor_parser"
[ 21.139289] audit: type=1400 audit(1530856752.789:7): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper"
pid=744 comm="apparmor_parser"
[ 21.162047] audit: type=1400 audit(1530856752.813:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=775
comm="apparmor_parser"
[ 21.162239] audit: type=1400 audit(1530856752.813:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=775
comm="apparmor_parser"
[ 21.162464] audit: type=1400 audit(1530856752.813:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=775
comm="apparmor_parser"
[ 21.202915] audit: type=1400 audit(1530856752.853:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oopslash"
pid=777 comm="apparmor_parser"
[ 26.048070] kauditd_printk_skb: 28 callbacks suppressed
[ 26.048072] audit: type=1400 audit(1530856757.701:40): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper"
pid=1056 comm="apparmor_parser"
[ 26.864971] audit: type=1400 audit(1530856758.517:41): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="snap-update-ns.core" pid=1064 comm="apparmor_parser"
[ 26.870623] audit: type=1400 audit(1530856758.521:42): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="snap.core.hook.configure" pid=1066 comm="apparmor_parser"
[ 27.337531] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 27.448778] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 27.974166] audit: type=1400 audit(1530856759.625:43): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="snap-update-ns.pulsemixer" pid=1119
comm="apparmor_parser"
[ 27.980707] audit: type=1400 audit(1530856759.633:44): apparmor="STATUS"
operation="profile_replace" profile="unconfined"
name="snap.pulsemixer.pulsemixer" pid=1121 comm="apparmor_parser"
[ 28.524989] audit: type=1400 audit(1530856760.177:45): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="snap-update-ns.software-boutique" pid=1131
comm="apparmor_parser"
[ 28.530093] audit: type=1400 audit(1530856760.181:46): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="snap.software-boutique.software-boutique" pid=1133
comm="apparmor_parser"
[ 29.459523] audit: type=1400 audit(1530856761.109:47): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="snap-update-ns.ubuntu-mate-welcome" pid=1140
comm="apparmor_parser"
[ 29.464801] audit: type=1400 audit(1530856761.117:48): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="snap.ubuntu-mate-welcome.hook.install" pid=1142
comm="apparmor_parser"
[ 29.469295] audit: type=1400 audit(1530856761.121:49): apparmor="STATUS"
operation="profile_replace" info="same as current profile, skipping"
profile="unconfined" name="snap.ubuntu-mate-welcome.hook.post-refresh" pid=1144
comm="apparmor_parser"
[ 30.617063] tg3 0000:03:00.0 enp3s0: Link is up at 1000 Mbps, full duplex
[ 30.617095] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX
[ 30.617127] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
Well, OK, seems to be different:
[ 1.816708] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.816713] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 8
[ 1.821946] xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci version 0x100
quirks 0x0000000100000090
[ 1.822129] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.18
[ 1.822131] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.822132] usb usb8: Product: xHCI Host Controller
[ 1.822133] usb usb8: Manufacturer: Linux 4.18.0-041800rc3-generic xhci-hcd
[ 1.822134] usb usb8: SerialNumber: 0000:02:00.0
[ 1.822233] hub 8-0:1.0: USB hub found
[ 1.822240] hub 8-0:1.0: 2 ports detected
[ 1.822333] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.822336] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 9
[ 1.822339] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 1.825479] usb usb9: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 1.825495] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 4.18
[ 1.825497] usb usb9: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.825498] usb usb9: Product: xHCI Host Controller
[ 1.825499] usb usb9: Manufacturer: Linux 4.18.0-041800rc3-generic xhci-hcd
[ 1.825500] usb usb9: SerialNumber: 0000:02:00.0
user@OptiPlex-580:~$ sudo fdisk -l
[sudo] password for user:
Disk /dev/loop0: 86,9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 7,9 MiB, 8294400 bytes, 16200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 86,7 MiB, 90923008 bytes, 177584 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 7,5 MiB, 7884800 bytes, 15400 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 86,6 MiB, 90759168 bytes, 177264 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 71,7 MiB, 75120640 bytes, 146720 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 74,5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xb35ef74d
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 976657 974610 475,9M 83 Linux
/dev/sda2 976896 55664639 54687744 26,1G 83 Linux
/dev/sda3 55666686 71288831 15622146 7,5G 5 Extended
/dev/sda5 55666688 71288831 15622144 7,5G 82 Linux swap / Solaris
Disk /dev/sdb: 28,7 GiB, 30752000000 bytes, 60062500 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x7ae4b539
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 54732799 54730752 26,1G 83 Linux
##[attaching USB-disk to the adaptor-card]:
Disk /dev/sdc: 29,3 GiB, 31466323968 bytes, 61457664 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd4feb568
Device Boot Start End Sectors Size Id Type
/dev/sdc1 2048 61456383 61454336 29,3G 83 Linux
user@OptiPlex-580:~$ dmesg | tail
[ 344.283232] scsi host9: usb-storage 9-2:1.0
[ 345.378429] scsi 9:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP
PQ: 0 ANSI: 6
[ 345.379134] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 347.384725] sd 9:0:0:0: [sdc] 61457664 512-byte logical blocks: (31.5
GB/29.3 GiB)
[ 347.385466] sd 9:0:0:0: [sdc] Write Protect is off
[ 347.385471] sd 9:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 347.386203] sd 9:0:0:0: [sdc] No Caching mode page found
[ 347.386214] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 347.411534] sdc: sdc1
[ 347.412919] sd 9:0:0:0: [sdc] Attached SCSI removable disk
user@OptiPlex-580:~$
##
Yes, semms fine, but when is the fix going to migrate to Ubuntu 18.04 LTS
mainline??
** Tags added: kernel-fixed-upstream
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1780219
Title:
xhci_pci module not workable regression
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780219/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
