Public bug reported: Hello,
Using Ubuntu installation media (ubuntu-18.04.2-server-amd64.iso / ubuntu-18.04.[1-2]-live-server-amd64.iso / Ubuntu Live 18.04.2 iso / Ubuntu Mate Live Ubuntu Live 18.04.[1-2] iso) Startup is hanging with : [ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit] [ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7 [ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19 [ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19 [ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered [ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 I'm facing exactly the same bug as these one: https://www.mail-archive.com/linux-usb@vger.kernel.org/msg102138.html https://bugs.gentoo.org/show_bug.cgi?id=612704 I installed Ubuntu Server 18.04.2 without the PCI card without trouble and then reinserted the PCI Card .... computer never start always hanging at the same steps as above. I managed to start only once time with the PCI card plugged by adding "pci=nomsi" to the kernel command line using an Ubuntu Mate Live media with persistence and had this output: [ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit] [ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 8.041967] xhci_hcd 0000:0d:00.0: Resetting [ 9.062082] xhci_hcd 0000:0d:00.0: timed out waiting for pending transaction; performing function level reset anyway [ 10.406071] xhci_hcd 0000:0d:00.0: not ready 1123ms after FLR; waiting [ 11.462075] xhci_hcd 0000:0d:00.0: not ready 2147ms after FLR; waiting [ 13.542072] xhci_hcd 0000:0d:00.0: not ready 4195ms after FLR; waiting [ 17.894085] xhci_hcd 0000:0d:00.0: not ready 8291ms after FLR; waiting [ 26.342086] xhci_hcd 0000:0d:00.0: not ready 16483ms after FLR; waiting [ 44.006072] xhci_hcd 0000:0d:00.0: not ready 32867ms after FLR; waiting [ 78.822072] xhci_hcd 0000:0d:00.0: not ready 65635ms after FLR; giving up [ 79.222070] xhci_hcd 0000:0d:00.0: Refused to change power state, currently in D3 [ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7 [ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19 [ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19 [ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered [ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 It was lucky because it never worked again. PCI card was not working but computer started. Here you can find included lspci -vv, lshw and full dmesg taken from during this unique startup with the PCI Card. I tried the same PCI Card with two computers and always had the same results. Kernel is hanging with "xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19" and nothing more. I tried this PCI Card with a CentOS 7.3 on same computer and kernel (3.10) is starting well and PCI card is fully working. Many thanks for your assistance. I apologize if it's an already reported bug. Kind Regards ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete ** Tags: bionic ** Attachment added: "lspci -vv, lshw and full dmesg" https://bugs.launchpad.net/bugs/1820363/+attachment/5246647/+files/lspci-lshw-dmesg%404.15.0-29-generic.txt ** Description changed: Hello, Using Ubuntu installation media (ubuntu-18.06.2-server-amd64.iso / ubuntu-18.06.[1-2]-live-server-amd64.iso / Ubuntu Live 18.06.2 iso / Ubuntu Mate Live Ubuntu Live 18.06.[1-2] iso) Startup is hanging with : [ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit] [ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7 [ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19 [ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19 [ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered - [ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 + [ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 I'm facing exactly the same bug as these one: https://www.mail-archive.com/linux-usb@vger.kernel.org/msg102138.html https://bugs.gentoo.org/show_bug.cgi?id=612704 I installed Ubuntu Server 18.04.2 without the PCI card without trouble and then reinserted the PCI Card .... computer never start always hanging at the same steps as above. I managed to start only once time with the PCI card plugged by adding "pci=nomsi" to the kernel command line using an Ubuntu Mate Live media with persistence and had this output: [ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit] [ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 8.041967] xhci_hcd 0000:0d:00.0: Resetting [ 9.062082] xhci_hcd 0000:0d:00.0: timed out waiting for pending transaction; performing function level reset anyway [ 10.406071] xhci_hcd 0000:0d:00.0: not ready 1123ms after FLR; waiting [ 11.462075] xhci_hcd 0000:0d:00.0: not ready 2147ms after FLR; waiting [ 13.542072] xhci_hcd 0000:0d:00.0: not ready 4195ms after FLR; waiting [ 17.894085] xhci_hcd 0000:0d:00.0: not ready 8291ms after FLR; waiting [ 26.342086] xhci_hcd 0000:0d:00.0: not ready 16483ms after FLR; waiting [ 44.006072] xhci_hcd 0000:0d:00.0: not ready 32867ms after FLR; waiting [ 78.822072] xhci_hcd 0000:0d:00.0: not ready 65635ms after FLR; giving up [ 79.222070] xhci_hcd 0000:0d:00.0: Refused to change power state, currently in D3 [ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7 [ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19 [ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19 [ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered [ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 It was lucky because it never worked again. PCI card was not working but computer started. Here you can find included lspci -vv, lshw and full dmesg taken from during this unique startup with the PCI Card. - I tried the same PCI Card with two computer and always had the same result. - Kernel is hanging with xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 and nothing more. + I tried the same PCI Card with two computers and always had the same results. + Kernel is hanging with "xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19" and nothing more. - I tried this PCI Card with a CentOS 7.3 and kernel (3.10) is starting - well and PCI card is fully working. + I tried this PCI Card with a CentOS 7.3 on same computer and kernel + (3.10) is starting well and PCI card is fully working. - Thanks for your assistance. + Many thanks for your assistance. Kind Regards ** Description changed: Hello, Using Ubuntu installation media (ubuntu-18.06.2-server-amd64.iso / ubuntu-18.06.[1-2]-live-server-amd64.iso / Ubuntu Live 18.06.2 iso / Ubuntu Mate Live Ubuntu Live 18.06.[1-2] iso) Startup is hanging with : [ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit] [ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7 [ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19 [ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19 [ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered [ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 I'm facing exactly the same bug as these one: https://www.mail-archive.com/linux-usb@vger.kernel.org/msg102138.html https://bugs.gentoo.org/show_bug.cgi?id=612704 I installed Ubuntu Server 18.04.2 without the PCI card without trouble and then reinserted the PCI Card .... computer never start always hanging at the same steps as above. I managed to start only once time with the PCI card plugged by adding "pci=nomsi" to the kernel command line using an Ubuntu Mate Live media with persistence and had this output: [ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit] [ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 8.041967] xhci_hcd 0000:0d:00.0: Resetting [ 9.062082] xhci_hcd 0000:0d:00.0: timed out waiting for pending transaction; performing function level reset anyway [ 10.406071] xhci_hcd 0000:0d:00.0: not ready 1123ms after FLR; waiting [ 11.462075] xhci_hcd 0000:0d:00.0: not ready 2147ms after FLR; waiting [ 13.542072] xhci_hcd 0000:0d:00.0: not ready 4195ms after FLR; waiting [ 17.894085] xhci_hcd 0000:0d:00.0: not ready 8291ms after FLR; waiting [ 26.342086] xhci_hcd 0000:0d:00.0: not ready 16483ms after FLR; waiting [ 44.006072] xhci_hcd 0000:0d:00.0: not ready 32867ms after FLR; waiting [ 78.822072] xhci_hcd 0000:0d:00.0: not ready 65635ms after FLR; giving up [ 79.222070] xhci_hcd 0000:0d:00.0: Refused to change power state, currently in D3 [ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7 [ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19 [ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19 [ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered [ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 It was lucky because it never worked again. PCI card was not working but computer started. Here you can find included lspci -vv, lshw and full dmesg taken from during this unique startup with the PCI Card. I tried the same PCI Card with two computers and always had the same results. Kernel is hanging with "xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19" and nothing more. I tried this PCI Card with a CentOS 7.3 on same computer and kernel (3.10) is starting well and PCI card is fully working. Many thanks for your assistance. + I apologize if it's an already reported bug. Kind Regards ** Description changed: Hello, - Using Ubuntu installation media (ubuntu-18.06.2-server-amd64.iso / - ubuntu-18.06.[1-2]-live-server-amd64.iso / Ubuntu Live 18.06.2 iso / - Ubuntu Mate Live Ubuntu Live 18.06.[1-2] iso) + Using Ubuntu installation media (ubuntu-18.04.2-server-amd64.iso / + ubuntu-18.04.[1-2]-live-server-amd64.iso / Ubuntu Live 18.04.2 iso / + Ubuntu Mate Live Ubuntu Live 18.04.[1-2] iso) Startup is hanging with : [ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit] [ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7 [ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19 [ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19 [ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered [ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 I'm facing exactly the same bug as these one: https://www.mail-archive.com/linux-usb@vger.kernel.org/msg102138.html https://bugs.gentoo.org/show_bug.cgi?id=612704 I installed Ubuntu Server 18.04.2 without the PCI card without trouble and then reinserted the PCI Card .... computer never start always hanging at the same steps as above. I managed to start only once time with the PCI card plugged by adding "pci=nomsi" to the kernel command line using an Ubuntu Mate Live media with persistence and had this output: [ 0.214796] pci 0000:0d:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.215620] pci 0000:0d:00.0: reg 0x10: [mem 0xfdbf0000-0xfdbf1fff 64bit] [ 0.219160] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 8.041967] xhci_hcd 0000:0d:00.0: Resetting [ 9.062082] xhci_hcd 0000:0d:00.0: timed out waiting for pending transaction; performing function level reset anyway [ 10.406071] xhci_hcd 0000:0d:00.0: not ready 1123ms after FLR; waiting [ 11.462075] xhci_hcd 0000:0d:00.0: not ready 2147ms after FLR; waiting [ 13.542072] xhci_hcd 0000:0d:00.0: not ready 4195ms after FLR; waiting [ 17.894085] xhci_hcd 0000:0d:00.0: not ready 8291ms after FLR; waiting [ 26.342086] xhci_hcd 0000:0d:00.0: not ready 16483ms after FLR; waiting [ 44.006072] xhci_hcd 0000:0d:00.0: not ready 32867ms after FLR; waiting [ 78.822072] xhci_hcd 0000:0d:00.0: not ready 65635ms after FLR; giving up [ 79.222070] xhci_hcd 0000:0d:00.0: Refused to change power state, currently in D3 [ 79.272644] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 79.272710] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7 [ 79.535236] xhci_hcd 0000:0d:00.0: Host halt failed, -19 [ 79.535291] xhci_hcd 0000:0d:00.0: can't setup: -19 [ 79.535347] xhci_hcd 0000:0d:00.0: USB bus 7 deregistered [ 79.555578] xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19 It was lucky because it never worked again. PCI card was not working but computer started. Here you can find included lspci -vv, lshw and full dmesg taken from during this unique startup with the PCI Card. I tried the same PCI Card with two computers and always had the same results. Kernel is hanging with "xhci_hcd 0000:0d:00.0: init 0000:0d:00.0 fail, -19" and nothing more. I tried this PCI Card with a CentOS 7.3 on same computer and kernel (3.10) is starting well and PCI card is fully working. Many thanks for your assistance. I apologize if it's an already reported bug. Kind Regards -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1820363 Title: NEC/Renesas PCI USB3 Cards (uPD720201) Host halt failed, -19 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1820363/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
