Happy to do so, but right now Gutsy is not installed and I have been
working from Live CD (tried to put Dapper back on but for some
unexplicable reason the original CD I have hangs up half way through
install). So I can try and reinstall Gutsy and switch apci to off. It
was on my list of things to do but I postponed it after the keyboard
failure.
Can I also do this with the Live CD at boot? If so how?
BTW, I think I may have forgotten to mention that the machine works fine
with an external keyboard (at least the one that I tried).
Here are the other files you wanted
Cheers
Phillip
Leann Ogasawara wrote:
> Hi Phillip,
>
> What an odd little bug. Does anything interesting show up in dmesg
> after you've attempted to type unsuccessfully? Also, I think you may
> have had a typo with your lspci command. Care to try again and attach
> the log file?
>
> sudo lspci -vvnn > lspci-vvnn.log
>
> Can you also try booting with the kernel boot option apci=off ?
>
> Thanks!
>
>
00:00.0 Host bridge [0600]: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP
340M] [1002:cab2] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at e8013000 (32-bit, prefetchable) [size=4K]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
00:01.0 PCI bridge [0604]: ATI Technologies Inc PCI Bridge [IGP 340M]
[1002:7010] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e8100000-e81fffff
Prefetchable memory behind bridge: f8000000-fbffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:02.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237]
(rev 03) (prog-if 10 [OHCI])
Subsystem: IBM ThinkPad R40e (2684-HVG) builtin USB [1014:0540]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8010000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Modem [0703]: ALi Corporation M5457 AC'97 Modem Controller [10b9:5457]
(prog-if 00 [Generic])
Subsystem: IBM ThinkPad R40e (2684-HVG) builtin modem [1014:0535]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8011000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 8400 [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI AC-Link
Controller Audio Device [10b9:5451] (rev 02)
Subsystem: IBM ThinkPad R40e (2684-HVG) builtin Audio [1014:053e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR+ <PERR+
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 8800 [size=256]
Region 1: Memory at e8012000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU]
[10b9:7101]
Subsystem: IBM ThinkPad R40e (2684-HVG) Power Management Controller
[1014:053c]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge
[Aladdin IV/V/V+] [10b9:1533]
Subsystem: IBM ThinkPad R40e (2684-HVG) PCI to ISA Bridge [1014:053b]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5901
100Base-TX [14e4:170d] (rev 01)
Subsystem: IBM ThinkPad R40e (2684-HVG) builtin ethernet controller
[1014:0545]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at 48000000 [disabled] [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
Enable-
Address: efdbbfffff8ff77c Data: 3bd5
00:0c.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus
Controller [104c:ac56]
Subsystem: IBM ThinkPad R40e (2684-HVG) Cardbus Controller [1014:0528]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 40000000-43fff000 (prefetchable)
Memory window 1: 44000000-47fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0f.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c4)
(prog-if fa)
Subsystem: IBM ThinkPad R40e (2684-HVG) builtin IDE [1014:053d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 8080 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon IGP
330M/340M/350M [1002:4337] (prog-if 00 [VGA])
Subsystem: IBM ThinkPad R40e (2684-HVG) builtin VGA controller
[1014:053a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8120000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14
23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002ef70000 (usable)
[ 0.000000] BIOS-e820: 000000002ef70000 - 000000002ef7b000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002ef7b000 - 000000002ef7d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002ef80000 - 000000002f000000 (reserved)
[ 0.000000] BIOS-e820: 000000003ef80000 - 000000003f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 751MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 192368) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 192368
[ 0.000000] HighMem 192368 -> 192368
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 192368
[ 0.000000] On node 0 totalpages: 192368
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1470 pages used for memmap
[ 0.000000] Normal zone: 186802 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6D90 checksum 0
[ 0.000000] ACPI: RSDP 000F6D90, 0024 (r2 IBM )
[ 0.000000] ACPI: XSDT 2EF749FF, 0044 (r1 IBM TP-1S 1290 LTP
0)
[ 0.000000] ACPI: FACP 2EF74B00, 00F4 (r3 IBM TP-1S 1290 IBM
1)
[ 0.000000] ACPI Error (tbfadt-0453): 32/64X address mismatch in
"Pm2ControlBlock": [00008030] [0000000000008020], using 64X [20070126]
[ 0.000000] ACPI Error (tbfadt-0453): 32/64X address mismatch in
"Gpe0Block": [00008018] [0000000000008028], using 64X [20070126]
[ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero
address or length: 000000000000802C/0 [20070126]
[ 0.000000] ACPI: DSDT 2EF74CE7, 61DE (r1 IBM TP-1S 1290 MSFT
100000E)
[ 0.000000] ACPI: FACS 2EF7C000, 0040
[ 0.000000] ACPI: SSDT 2EF74CB4, 0033 (r1 IBM TP-1S 1290 MSFT
100000E)
[ 0.000000] ACPI: ECDT 2EF7AEC5, 0051 (r1 IBM TP-1S 1290 IBM
1)
[ 0.000000] ACPI: BOOT 2EF7AFD8, 0028 (r1 IBM TP-1S 1290 LTP
1)
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
3f000000:c0f00000)
[ 0.000000] Built 1 zonelists. Total pages: 190866
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet
splash --
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (015ee000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2392.467 MHz processor.
[ 33.284616] Console: colour VGA+ 80x25
[ 33.285853] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 33.287715] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 33.315516] Memory: 750860k/769472k available (2015k kernel code, 18000k
reserved, 916k data, 364k init, 0k highmem)
[ 33.315531] virtual kernel memory layout:
[ 33.315532] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 33.315534] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 33.315535] vmalloc : 0xef800000 - 0xff7fe000 ( 255 MB)
[ 33.315536] lowmem : 0xc0000000 - 0xeef70000 ( 751 MB)
[ 33.315537] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 33.315540] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 33.315541] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 33.315545] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 33.315605] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1,
Nodes=1
[ 33.395642] Calibrating delay using timer specific routine.. 4788.66
BogoMIPS (lpj=9577329)
[ 33.395684] Security Framework v1.0.0 initialized
[ 33.395699] SELinux: Disabled at boot.
[ 33.395716] Mount-cache hash table entries: 512
[ 33.395948] CPU: After generic identify, caps: bfebf9ff 00000000 00000000
00000000 00004400 00000000 00000000
[ 33.395967] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 33.395971] CPU: L2 cache: 256K
[ 33.395974] CPU: Hyper-Threading is disabled
[ 33.395978] CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080
00004400 00000000 00000000
[ 33.395994] Compat vDSO mapped to ffffe000.
[ 33.396018] Checking 'hlt' instruction... OK.
[ 33.411830] SMP alternatives: switching to UP code
[ 33.412291] Freeing SMP alternatives: 11k freed
[ 33.412787] Early unpacking initramfs... done
[ 33.784870] ACPI: Core revision 20070126
[ 33.785012] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 33.787763] ACPI: setting ELCR to 0200 (from 0800)
[ 33.823737] CPU0: Intel Mobile Intel(R) Celeron(R) CPU 2.40GHz stepping 09
[ 33.823749] SMP motherboard not detected.
[ 33.823752] Local APIC not detected. Using dummy APIC emulation.
[ 33.823817] Brought up 1 CPUs
[ 33.824068] Booting paravirtualized kernel on bare hardware
[ 33.824240] Time: 8:51:48 Date: 10/15/107
[ 33.824293] NET: Registered protocol family 16
[ 33.824519] EISA bus registered
[ 33.824550] ACPI: bus type pci registered
[ 33.826033] PCI: PCI BIOS revision 2.10 entry at 0xfd84c, last bus=4
[ 33.826036] PCI: Using configuration type 1
[ 33.826038] Setting up standard PCI resources
[ 33.828742] ACPI: EC: Found ECDT
[ 36.332786] ACPI: Interpreter enabled
[ 36.332798] ACPI: (supports S0 S3 S4 S5)
[ 36.332826] ACPI: Using PIC for interrupt routing
[ 38.338789] ACPI: EC: GPE=0x02, ports=0x66, 0x62
[ 38.339135] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 38.339146] PCI: Probing PCI hardware (bus 00)
[ 38.339521] PCI quirk: region 8000-803f claimed by ali7101 ACPI
[ 38.339526] PCI quirk: region 8040-805f claimed by ali7101 SMB
[ 38.340056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 38.340150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 38.342910] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
[ 38.343103] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
[ 38.343289] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
[ 38.343435] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 38.343580] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 38.343765] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
[ 38.344001] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
[ 38.344186] ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 10 *11)
[ 39.343885] ACPI: Power Resource [PUBS] (on)
[ 39.343933] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 39.343966] pnp: PnP ACPI init
[ 39.344005] ACPI: bus type pnp registered
[ 40.343982] pnp: PnP ACPI: found 10 devices
[ 40.343990] ACPI: ACPI bus type pnp unregistered
[ 40.343999] PnPBIOS: Disabled by ACPI PNP
[ 40.344143] PCI: Using ACPI for IRQ routing
[ 40.344149] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 40.369809] NET: Registered protocol family 8
[ 40.369813] NET: Registered protocol family 20
[ 40.370015] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 40.370020] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 40.370023] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 40.370026] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 40.370040] pnp: 00:02: ioport range 0x40b-0x40b has been reserved
[ 40.370043] pnp: 00:02: ioport range 0x480-0x48f has been reserved
[ 40.370046] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 40.370049] pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 40.370053] pnp: 00:02: ioport range 0xfe10-0xfe11 has been reserved
[ 40.370056] pnp: 00:02: iomem range 0xe8013000-0xe8013fff has been reserved
[ 40.371837] Time: tsc clocksource has been installed.
[ 40.400826] PCI: Bridge: 0000:00:01.0
[ 40.400829] IO window: d000-dfff
[ 40.400836] MEM window: e8100000-e81fffff
[ 40.400840] PREFETCH window: f8000000-fbffffff
[ 40.400845] PCI: Bus 2, cardbus bridge: 0000:00:0c.0
[ 40.400847] IO window: 00001000-000010ff
[ 40.400851] IO window: 00001400-000014ff
[ 40.400856] PREFETCH window: 40000000-43ffffff
[ 40.400860] MEM window: 44000000-47ffffff
[ 40.401327] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 40.401333] PCI: setting IRQ 11 as level-triggered
[ 40.401337] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 40.401373] NET: Registered protocol family 2
[ 40.439929] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 40.440290] TCP established hash table entries: 131072 (order: 8, 1572864
bytes)
[ 40.444389] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 40.445777] TCP: Hash tables configured (established 131072 bind 65536)
[ 40.445791] TCP reno registered
[ 40.456170] checking if image is initramfs... it is
[ 40.903912] Switched to high resolution mode on CPU 0
[ 41.173995] Freeing initrd memory: 7305k freed
[ 41.174304] Simple Boot Flag at 0x35 set to 0x1
[ 41.174754] audit: initializing netlink socket (disabled)
[ 41.174782] audit(1195116714.532:1): initialized
[ 41.178942] VFS: Disk quotas dquot_6.5.1
[ 41.179086] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 41.179325] io scheduler noop registered
[ 41.179328] io scheduler anticipatory registered
[ 41.179331] io scheduler deadline registered
[ 41.179373] io scheduler cfq registered (default)
[ 41.395436] Activating ISA DMA hang workarounds.
[ 41.395456] Boot video device is 0000:01:05.0
[ 41.395880] isapnp: Scanning for PnP cards...
[ 41.750550] isapnp: No Plug & Play device found
[ 41.884886] Real Time Clock Driver v1.12ac
[ 41.885097] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 41.888301] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 41.888309] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKG] -> GSI 11
(level, low) -> IRQ 11
[ 41.893278] 0000:00:03.0: ttyS0 at I/O 0x8428 (irq = 11) is a 8250
[ 41.896025] 0000:00:03.0: ttyS1 at I/O 0x8440 (irq = 11) is a 8250
[ 41.897797] 0000:00:03.0: ttyS2 at I/O 0x8450 (irq = 11) is a 8250
[ 41.899613] 0000:00:03.0: ttyS3 at I/O 0x8460 (irq = 11) is a 8250
[ 41.900212] Couldn't register serial port 0000:00:03.0: -28
[ 41.901539] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 41.901834] input: Macintosh mouse button emulation as /class/input/input0
[ 41.902035] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq
1,12
[ 41.903572] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 41.903583] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 41.904036] mice: PS/2 mouse device common for all mice
[ 41.904398] EISA: Probing bus 0 at eisa.0
[ 41.904416] Cannot allocate resource for EISA slot 1
[ 41.904455] Cannot allocate resource for EISA slot 8
[ 41.904457] EISA: Detected 0 cards.
[ 41.904642] TCP cubic registered
[ 41.904662] NET: Registered protocol family 1
[ 41.904699] Using IPI No-Shortcut mode
[ 41.905088] Magic number: 15:343:877
[ 41.905379] hash matches device ptyx1
[ 41.906348] Freeing unused kernel memory: 364k freed
[ 41.906784] input: AT Translated Set 2 keyboard as /class/input/input1
[ 43.305248] AppArmor: AppArmor initialized<5>audit(1195116716.532:2):
type=1505 info="AppArmor initialized" pid=1193
[ 43.340145] fuse init (API version 7.8)
[ 43.350793] Failure registering capabilities with primary security module.
[ 43.372412] ACPI: IBM ThinkPad R40e detected - limiting to C1 max_cstate.
Override with "processor.max_cstate=9"
[ 43.372424] ACPI: processor limited to max C-state 1
[ 44.371362] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 44.371379] ACPI: Processor [CPU] (supports 8 throttling states)
[ 48.370975] ACPI: Thermal Zone [THM0] (46 C)
[ 49.623177] usbcore: registered new interface driver usbfs
[ 49.623228] usbcore: registered new interface driver hub
[ 49.623279] usbcore: registered new device driver usb
[ 49.624600] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 49.735719] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 49.735731] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 50.623177] ACPI: PCI Interrupt Link [LNKI] enabled at IRQ 11
[ 50.623187] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKI] -> GSI 11
(level, low) -> IRQ 11
[ 50.623218] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 50.624005] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[ 50.624047] ohci_hcd 0000:00:02.0: irq 11, io mem 0xe8010000
[ 50.686732] usb usb1: configuration #1 chosen from 1 choice
[ 50.687143] hub 1-0:1.0: USB hub found
[ 50.687169] hub 1-0:1.0: 2 ports detected
[ 50.791839] tg3.c:v3.77 (May 31, 2007)
[ 50.792295] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 50.792300] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 50.875052] eth0: Tigon3 [partno(BCM95901A50) rev 3001 PHY(5705)]
(PCI:33MHz:32-bit) 10/100Base-TX Ethernet 00:06:1b:e0:6b:91
[ 50.875063] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1]
TSOcap[1]
[ 50.875067] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 50.875328] ALI15X3: IDE controller at PCI slot 0000:00:0f.0
[ 50.875360] ACPI: Unable to derive IRQ for device 0000:00:0f.0
[ 50.875364] ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
[ 50.875378] ALI15X3: chipset revision 196
[ 50.875382] ALI15X3: not 100% native mode: will probe irqs later
[ 50.875406] ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA,
hdb:pio
[ 50.875429] ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:DMA,
hdd:pio
[ 50.875448] Probing IDE interface ide0...
[ 51.142649] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 51.162830] hda: IC25N030ATMR04-0, ATA DISK drive
[ 51.383340] usb 1-2: configuration #1 chosen from 1 choice
[ 51.405525] usbcore: registered new interface driver hiddev
[ 51.425070] input: Logitech USB Receiver as /class/input/input2
[ 51.425466] input: USB HID v1.10 Mouse [Logitech USB Receiver] on
usb-0000:00:02.0-2
[ 51.425501] usbcore: registered new interface driver usbhid
[ 51.425507]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 51.834600] hda: selected mode 0x45
[ 51.834840] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 52.113061] Probing IDE interface ide1...
[ 52.846701] hdc: DW-224E, ATAPI CD/DVD-ROM drive
[ 53.518447] hdc: selected mode 0x42
[ 53.518608] ide1 at 0x170-0x177,0x376 on irq 15
[ 53.531625] SCSI subsystem initialized
[ 53.540080] libata version 2.21 loaded.
[ 53.559321] hda: max request size: 128KiB
[ 53.575043] hda: Host Protected Area detected.
[ 53.575048] current capacity is 52449077 sectors (26853 MB)
[ 53.575050] native capacity is 58605120 sectors (30005 MB)
[ 53.576393] hda: Host Protected Area disabled.
[ 53.576403] hda: 58605120 sectors (30005 MB) w/1740KiB Cache,
CHS=62016/15/63, UDMA(100)
[ 53.576613] hda: cache flushes supported
[ 53.576714] hda: hda1 hda2 < hda5 >
[ 53.691427] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 1658kB Cache, UDMA(33)
[ 53.691445] Uniform CD-ROM driver Revision: 3.20
[ 55.028637] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 55.028646] EXT3-fs: write access will be enabled during recovery.
[ 66.403267] kjournald starting. Commit interval 5 seconds
[ 66.403307] EXT3-fs: recovery complete.
[ 66.466067] EXT3-fs: mounted filesystem with ordered data mode.
[ 67.519166] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 67.588730] ISO 9660 Extensions: RRIP_1991A
[ 67.877691] Registering unionfs 1.4
[ 67.877699] unionfs: debugging is not enabled
[ 67.908540] loop: module loaded
[ 68.216706] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher
[ 170.597111] ACPI: Battery Slot [BAT0] (battery present)
[ 179.468488] Linux agpgart interface v0.102 (c) Dave Jones
[ 179.534462] [drm] Initialized drm 1.1.0 20060810
[ 179.594958] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 179.594968] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 179.596022] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[ 203.609972] agpgart: Detected Ati IGP330/340/345/350/M chipset
[ 203.620829] agpgart: AGP aperture is 64M @ 0xec000000
[ 203.757915] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 203.882196] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 204.153914] ali15x3_smbus 0000:00:06.0: ALI15X3_smb region uninitialized -
upgrade BIOS or use force_addr=0xaddr
[ 204.153998] ali15x3_smbus 0000:00:06.0: ALI15X3 not detected, module not
inserted.
[ 204.918228] parport_pc 00:09: reported by Plug and Play ACPI
[ 204.918354] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 205.107381] Yenta: CardBus bridge found at 0000:00:0c.0 [1014:0528]
[ 205.107406] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 205.107409] Yenta: Routing CardBus interrupts to PCI
[ 205.107414] Yenta TI: socket 0000:00:0c.0, mfunc 0x01d01002, devctl 0x64
[ 205.222212] input: PC Speaker as /class/input/input3
[ 205.338878] Yenta: ISA IRQ mask 0x0478, PCI irq 11
[ 205.338886] Socket status: 30000007
[ 205.591018] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 205.605185] input: TPPS/2 IBM TrackPoint as /class/input/input4
[ 205.767787] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 205.767797] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKH] -> GSI 11
(level, low) -> IRQ 11
[ 206.262892] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x388-0x38f
[ 206.266884] cs: IO port probe 0x3e0-0x4ff: clean.
[ 206.268451] cs: IO port probe 0x820-0x8ff: clean.
[ 206.269874] cs: IO port probe 0xc00-0xcf7: clean.
[ 206.271580] cs: IO port probe 0xa00-0xaff: clean.
[ 210.461818] AC'97 1 does not respond - RESET
[ 210.477816] AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 210.477893] ali mixer 1 creating error.
[ 211.857061] Adding 1228932k swap on /dev/hda5. Priority:-1 extents:1
across:1228932k
[ 216.269452] ACPI: AC Adapter [AC] (on-line)
[ 216.350129] No dock devices found.
[ 216.452626] input: Power Button (FF) as /class/input/input5
[ 216.461589] ACPI: Power Button (FF) [PWRF]
[ 216.510082] input: Lid Switch as /class/input/input6
[ 216.518965] ACPI: Lid Switch [LID]
[ 216.565407] input: Sleep Button (CM) as /class/input/input7
[ 216.566023] ACPI: Sleep Button (CM) [SLPB]
[ 217.745300] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 218.468156] ACPI: Invalid _PSS data: freq is zero
[ 223.307889] lp0: using parport0 (interrupt-driven).
[ 223.352301] ppdev: user-space parallel port driver
[ 223.674918] PM: Writing back config space on device 0000:00:0b.0 at offset b
(was 165d14e4, writing 5451014)
[ 223.674938] PM: Writing back config space on device 0000:00:0b.0 at offset 3
(was 0, writing 4008)
[ 223.674944] PM: Writing back config space on device 0000:00:0b.0 at offset 2
(was 2000000, writing 2000001)
[ 223.674950] PM: Writing back config space on device 0000:00:0b.0 at offset 1
(was 2b00000, writing 2b00106)
[ 223.674955] PM: Writing back config space on device 0000:00:0b.0 at offset 0
(was 165d14e4, writing 170d14e4)
[ 225.859718] IBM machine detected. Enabling interrupts during APM calls.
[ 225.859727] apm: BIOS not found.
[ 226.521280] thinkpad_acpi: ThinkPad ACPI Extras v0.14
[ 226.521295] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 380.225915] Non-volatile memory driver v1.2
[ 380.532246] input: /usr/sbin/thinkpad-keys as /class/input/input8
[ 380.805503] Failure registering capabilities with primary security module.
[ 381.759767] Bluetooth: Core ver 2.11
[ 381.759905] NET: Registered protocol family 31
[ 381.759909] Bluetooth: HCI device and connection manager initialized
[ 381.759915] Bluetooth: HCI socket layer initialized
[ 381.917073] Bluetooth: L2CAP ver 2.8
[ 381.917082] Bluetooth: L2CAP socket layer initialized
[ 381.946303] Bluetooth: RFCOMM socket layer initialized
[ 381.946457] Bluetooth: RFCOMM TTY layer initialized
[ 381.946462] Bluetooth: RFCOMM ver 1.8
[ 386.911764] [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock
held
[ 386.911847] [drm:drm_unlock] *ERROR* Process 7918 using kernel context 0
--
Gutsy Thinkpad R40E keyboard failure
https://bugs.launchpad.net/bugs/161845
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
