This happens on my system.
Meerkat> uname -a
Linux Meerkat 5.0.0-23-generic #24~18.04.1-Ubuntu SMP Mon Jul 29 16:12:28 UTC
2019 x86_64 x86_64 x86_64 GNU/Linux
Meerkat> lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 18.04.3 LTS
Release: 18.04
Codename: bionic
BIOS is up-to-date
Meerkat> sudo dmidecode
<snip>
BIOS Information
Vendor: Intel Corp.
Version: BNKBL357.86A.0069.2018.0920.1250
Release Date: 09/20/2018
<snip>
Meerkat> dmesg | tail -20
[ 117.574049] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x3000]
[ 117.574050] pcieport 0000:01:00.0: BAR 13: no space for [io size 0x3000]
[ 117.574051] pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x3000]
[ 117.574055] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000
64bit pref]
[ 117.574056] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size
0x00200000 64bit pref]
[ 117.574057] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 117.574057] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 117.574058] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 117.574059] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 117.574061] pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000
64bit pref]
[ 117.574062] pcieport 0000:02:02.0: BAR 15: failed to assign [mem size
0x00200000 64bit pref]
[ 117.574063] pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
[ 117.574063] pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
[ 117.574064] pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
[ 117.574065] pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
[ 122.022075] pcieport 0000:02:00.0: Refused to change power state, currently
in D3
[ 122.051009] pci_bus 0000:03: busn_res: [bus 03] is released
[ 122.051213] pci_bus 0000:04: busn_res: [bus 04-38] is released
[ 122.051378] pci_bus 0000:39: busn_res: [bus 39] is released
[ 122.051462] pci_bus 0000:02: busn_res: [bus 02-39] is released
Meerkat> sudo lspci -t
-[0000:00]-+-00.0
+-02.0
+-08.0
+-14.0
+-14.2
+-16.0
+-17.0
+-1c.0-[01-39]--
+-1c.5-[3a]----00.0
+-1c.7-[3b]----00.0
+-1d.0-[3c]----00.0
+-1f.0
+-1f.2
+-1f.3
+-1f.4
\-1f.6
Meerkat> sudo lspci -v -nn -s 0000:001c.0
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI Express Root
Port #1 [8086:9d10] (rev f1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=01, subordinate=39, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c4000000-da0fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000c1ffffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Intel Corporation Sunrise Point-LP PCI
Express Root Port [8086:2068]
Capabilities: [a0] Power Management version 3
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Access Control Services
Capabilities: [220] #19
Kernel driver in use: pcieport
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1426216
Title:
pci driver messages - BAR 13: no space for
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1426216/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
