Launchpad has imported 30 comments from the remote bug at https://bugzilla.xfce.org/show_bug.cgi?id=15816.
If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. ------------------------------------------------------------------------ On 2019-08-13T08:58:38+00:00 Chris-herold wrote: Since the update to 4.14, xfce4-display-settings seg faults on my Archlinux. The stack trace is not really helpful: [0] from 0x00007ffff6f9e15e in __strcmp_avx2+30 (no arguments) [1] from 0x0000555555565a0c (no arguments) [+] >>> bt #0 0x00007ffff6f9e15e in __strcmp_avx2 () at /usr/lib/libc.so.6 #1 0x0000555555565a0c in () #2 0x000055555555dad5 in () #3 0x0000555555560896 in () #4 0x000055555555b201 in () #5 0x00007ffff6e6aee3 in __libc_start_main () at /usr/lib/libc.so.6 #6 0x000055555555bd0e in () System information: System: Host: bimo Kernel: 5.2.8-arch1-1-ARCH x86_64 bits: 64 compiler: gcc v: 9.1.0 Desktop: Xfce 4.14.1 tk: Gtk 3.24.10 info: xfce4-panel wm: xfwm4 dm: GDM 3.32.0 Distro: Arch Linux Machine: Type: Laptop System: LENOVO product: 20HGS3B400 v: ThinkPad T470s serial: <filter> Chassis: type: 10 serial: <filter> Mobo: LENOVO model: 20HGS3B400 serial: <filter> UEFI: LENOVO v: N1WET49W (1.28 ) date: 07/04/2018 Battery: ID-1: BAT0 charge: 18.8 Wh condition: 18.9/23.5 Wh (80%) volts: 12.7/11.2 model: SANYO 00HW022 type: Li-poly serial: <filter> status: Unknown cycles: 107 ID-2: BAT1 charge: 23.4 Wh condition: 23.4/26.3 Wh (89%) volts: 12.8/11.4 model: SANYO 01AV405 type: Li-ion serial: <filter> status: Full cycles: 206 CPU: Topology: Dual Core model: Intel Core i5-7200U bits: 64 type: MT MCP arch: Kaby Lake rev: 9 L2 cache: 3072 KiB flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 21704 Speed: 700 MHz min/max: 400/3100 MHz Core speeds (MHz): 1: 700 2: 700 3: 700 4: 701 Graphics: Device-1: Intel HD Graphics 620 vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:5916 Display: x11 server: X.org 1.20.5 driver: i915 resolution: <xdpyinfo missing> Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel bus ID: 00:1f.3 chip ID: 8086:9d71 Sound Server: ALSA v: k5.2.8-arch1-1-ARCH Network: Device-1: Intel Ethernet I219-V vendor: Lenovo driver: e1000e v: 3.2.6-k port: efa0 bus ID: 00:1f.6 chip ID: 8086:15d8 IF: enp0s31f6 state: up speed: 1000 Mbps duplex: full mac: <filter> Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel port: efa0 bus ID: 3a:00.0 chip ID: 8086:24fd IF: wlp58s0 state: up mac: <filter> IF-ID-1: docker0 state: down mac: <filter> Drives: Local Storage: total: 476.94 GiB used: 332.20 GiB (69.7%) ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLW512HMJP-000L7 size: 476.94 GiB speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: 6L7QCXY7 temp: 35 C scheme: GPT Partition: ID-1: / size: 466.45 GiB used: 332.13 GiB (71.2%) fs: btrfs dev: /dev/dm-0 ID-2: /boot size: 499.0 MiB used: 73.6 MiB (14.7%) fs: vfat dev: /dev/nvme0n1p1 ID-3: /home size: 466.45 GiB used: 332.13 GiB (71.2%) fs: btrfs dev: /dev/dm-0 ID-4: swap-1 size: 10.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/nvme0n1p2 Sensors: System Temperatures: cpu: 49.0 C mobo: N/A Fan Speeds (RPM): cpu: 2235 Info: Processes: 262 Uptime: 2h 40m Memory: 19.50 GiB used: 2.54 GiB (13.0%) Init: systemd v: 242 Compilers: gcc: 9.1.0 clang: 8.0.1 Shell: zsh v: 5.7.1 running in: konsole inxi: 3.0.35 Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/0 ------------------------------------------------------------------------ On 2019-08-13T20:06:58+00:00 Zeezerzotshiphop wrote: Can confirm. I tried to build the xfce4-settings from source with debugging on, not sure if it worked, but I ran it through valgrind and got some interesting results. Here is valgrind output from running xfce4-settings-manager, then clicking on display, then pressing "update profile": bryson@archpad[xfce4-settings]$ valgrind xfce4-settings-manager ==10799== Memcheck, a memory error detector ==10799== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==10799== Using Valgrind-3.14.0 and LibVEX; rerun with -h for copyright info ==10799== Command: xfce4-settings-manager ==10799== (xfce4-settings-manager:10799): xfce4-settings-manager-CRITICAL **: 12:55:02.889: pluggable dialog "xfce4-display-settings" crashed ==10799== Invalid read of size 8 ==10799== at 0x4FDC525: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x4FE69C6: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x503BACA: gdk_display_get_event (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x4FE6703: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x538DCF3: g_main_context_dispatch (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== by 0x538FB10: ??? (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== by 0x5390A62: g_main_loop_run (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== by 0x4B46EEE: gtk_main (in /usr/lib/libgtk-3.so.0.2406.4) ==10799== by 0x10C274: ??? (in /usr/bin/xfce4-settings-manager) ==10799== by 0x546FEE2: (below main) (in /usr/lib/libc-2.29.so) ==10799== Address 0x9c7dc58 is 8 bytes inside a block of size 24 free'd ==10799== at 0x48399AB: free (vg_replace_malloc.c:530) ==10799== by 0x50259D2: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x502C248: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x4FD3D49: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x49521C4: ??? (in /usr/lib/libgtk-3.so.0.2406.4) ==10799== by 0x4FDC51E: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x4FE69C6: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x503BACA: gdk_display_get_event (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x4FE6703: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x538DCF3: g_main_context_dispatch (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== by 0x538FB10: ??? (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== by 0x5390A62: g_main_loop_run (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== Block was alloc'd at ==10799== at 0x483877F: malloc (vg_replace_malloc.c:299) ==10799== by 0x5387289: g_malloc (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== by 0x5369673: g_slice_alloc (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== by 0x5391B34: g_list_append (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== by 0x502C9A1: gdk_window_add_filter (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x49518D9: ??? (in /usr/lib/libgtk-3.so.0.2406.4) ==10799== by 0x4952115: ??? (in /usr/lib/libgtk-3.so.0.2406.4) ==10799== by 0x4FDC51E: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x4FE69C6: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x503BACA: gdk_display_get_event (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x4FE6703: ??? (in /usr/lib/libgdk-3.so.0.2406.4) ==10799== by 0x538DCF3: g_main_context_dispatch (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== ^C==10799== ==10799== Process terminating with default action of signal 2 (SIGINT) ==10799== at 0x553A667: poll (in /usr/lib/libc-2.29.so) ==10799== by 0x538FA7F: ??? (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== by 0x5390A62: g_main_loop_run (in /usr/lib/libglib-2.0.so.0.6000.6) ==10799== by 0x4B46EEE: gtk_main (in /usr/lib/libgtk-3.so.0.2406.4) ==10799== by 0x10C274: ??? (in /usr/bin/xfce4-settings-manager) ==10799== by 0x546FEE2: (below main) (in /usr/lib/libc-2.29.so) ==10799== ==10799== HEAP SUMMARY: ==10799== in use at exit: 4,491,676 bytes in 36,748 blocks ==10799== total heap usage: 864,248 allocs, 827,500 frees, 70,270,245 bytes allocated ==10799== ==10799== LEAK SUMMARY: ==10799== definitely lost: 24,599 bytes in 29 blocks ==10799== indirectly lost: 61,023 bytes in 2,667 blocks ==10799== possibly lost: 6,904 bytes in 96 blocks ==10799== still reachable: 4,136,982 bytes in 31,995 blocks ==10799== of which reachable via heuristic: ==10799== length64 : 10,256 bytes in 137 blocks ==10799== newarray : 2,480 bytes in 75 blocks ==10799== suppressed: 0 bytes in 0 blocks ==10799== Rerun with --leak-check=full to see details of leaked memory ==10799== ==10799== For counts of detected and suppressed errors, rerun with: -v ==10799== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0) For me, sometimes xfce4-display-settings will open, and other times it will not. It either segfault's by opening, or by applying or updating a profile. Hardware info: bryson@archpad[~]$ sudo lshw [sudo] password for bryson: archpad description: Notebook product: 20FCS0E80L (LENOVO_MT_20FC_BU_Think_FM_ThinkPad X1 Carbon 4th) vendor: LENOVO version: ThinkPad X1 Carbon 4th serial: R90LPSLL width: 4294967295 bits capabilities: smbios-2.8 dmi-2.8 smp vsyscall32 configuration: administrator_password=disabled chassis=notebook family=ThinkPad X1 Carbon 4th power-on_password=disabled sku=LENOVO_MT_20FC_BU_Think_FM_ThinkPad X1 Carbon 4th uuid=CC8F4BC3-3033-B211-A85C-A491E2669F29 *-core description: Motherboard product: 20FCS0E80L vendor: LENOVO physical id: 0 version: SDK0J40705 WIN serial: W1KS69L11T1 slot: Not Available *-cache:0 description: L1 cache physical id: 3 slot: L1 Cache size: 64KiB capacity: 64KiB capabilities: synchronous internal write-back data configuration: level=1 *-cache:1 description: L1 cache physical id: 4 slot: L1 Cache size: 64KiB capacity: 64KiB capabilities: synchronous internal write-back instruction configuration: level=1 *-cache:2 description: L2 cache physical id: 5 slot: L2 Cache size: 512KiB capacity: 512KiB capabilities: synchronous internal write-back unified configuration: level=2 *-cache:3 description: L3 cache physical id: 6 slot: L3 Cache size: 4MiB capacity: 4MiB capabilities: synchronous internal write-back unified configuration: level=3 *-cpu description: CPU product: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz vendor: Intel Corp. physical id: 7 bus info: cpu@0 version: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz serial: None slot: U3E1 size: 1047MHz capacity: 4005MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d cpufreq configuration: cores=2 enabledcores=2 threads=4 *-memory description: System Memory physical id: 8 slot: System board or motherboard size: 16GiB *-bank:0 description: Chip LPDDR3 Synchronous 1867 MHz (0.5 ns) product: H9CCNNNCLTMLAR vendor: SK Hynix physical id: 0 serial: None slot: ChannelA size: 8GiB width: 64 bits clock: 1867MHz (0.5ns) *-bank:1 description: Chip LPDDR3 Synchronous 1867 MHz (0.5 ns) product: H9CCNNNCLTMLAR vendor: SK Hynix physical id: 1 serial: None slot: ChannelB size: 8GiB width: 64 bits clock: 1867MHz (0.5ns) *-firmware description: BIOS vendor: LENOVO physical id: c version: N1FET43W (1.17 ) date: 08/02/2016 size: 128KiB capacity: 15MiB capabilities: pci pnp upgrade shadowing cdboot bootselect edd int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb biosbootspecification uefi *-pci description: Host bridge product: Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 08 width: 32 bits clock: 33MHz configuration: driver=skl_uncore resources: irq:0 *-display description: VGA compatible controller product: Skylake GT2 [HD Graphics 520] vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: pciexpress msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:130 memory:f0000000-f0ffffff memory:e0000000-efffffff ioport:e000(size=64) memory:c0000-dffff *-generic:0 UNCLAIMED description: System peripheral product: Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 00 width: 64 bits clock: 33MHz capabilities: msi pm cap_list configuration: latency=0 resources: memory:f124a000-f124afff *-generic:1 description: Non-VGA unclassified device product: Sunrise Point-LP Integrated Sensor Hub vendor: Intel Corporation physical id: 13 bus info: pci@0000:00:13.0 version: 21 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=intel_ish_ipc latency=0 resources: irq:20 memory:f124b000-f124bfff *-usb description: USB controller product: Sunrise Point-LP USB 3.0 xHCI Controller vendor: Intel Corporation physical id: 14 bus info: pci@0000:00:14.0 version: 21 width: 64 bits clock: 33MHz capabilities: pm msi xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:125 memory:f1220000-f122ffff *-usbhost:0 product: xHCI Host Controller vendor: Linux 5.2.8-arch1-1-ARCH xhci-hcd physical id: 0 bus info: usb@1 logical name: usb1 version: 5.02 capabilities: usb-2.00 configuration: driver=hub slots=12 speed=480Mbit/s *-usb:0 description: USB hub product: USB2.0 Hub vendor: VIA Labs, Inc. physical id: 4 bus info: usb@1:4 version: 52.84 capabilities: usb-2.10 configuration: driver=hub slots=4 speed=480Mbit/s *-usb:0 description: USB hub product: USB2.0 Hub vendor: VIA Labs, Inc. physical id: 1 bus info: usb@1:4.1 version: 52.81 capabilities: usb-2.10 configuration: driver=hub slots=4 speed=480Mbit/s *-usb:0 description: Keyboard product: Corsair K70R Gaming Keyboard vendor: Corsair physical id: 1 bus info: usb@1:4.1.1 version: 1.09 capabilities: usb-2.00 configuration: driver=usbhid maxpower=500mA speed=12Mbit/s *-usb:1 description: Audio device product: ThinkPad OneLink Plus Dock Audio vendor: C-Media Electronics Inc. physical id: 4 bus info: usb@1:4.1.4 version: 1.09 capabilities: usb-2.00 audio-control configuration: driver=usbhid maxpower=100mA speed=12Mbit/s *-usb:1 description: USB hub product: USB2.0 Hub vendor: Genesys Logic, Inc. physical id: 2 bus info: usb@1:4.2 version: 85.37 capabilities: usb-2.00 configuration: driver=hub maxpower=100mA slots=2 speed=480Mbit/s *-usb description: Mouse product: Gaming Mouse G502 vendor: Logitech physical id: 2 bus info: usb@1:4.2.2 version: 88.02 serial: 187234733237 capabilities: usb-2.00 configuration: driver=usbhid maxpower=300mA speed=12Mbit/s *-usb:1 description: Bluetooth wireless interface vendor: Intel Corp. physical id: 7 bus info: usb@1:7 version: 0.01 capabilities: bluetooth usb-2.00 configuration: driver=btusb maxpower=100mA speed=12Mbit/s *-usb:2 description: Video product: Integrated Camera vendor: Azurewave physical id: 8 bus info: usb@1:8 version: 0.20 serial: NULL capabilities: usb-2.00 configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s *-usb:3 UNCLAIMED description: Generic USB device product: VFS7500 Touch Fingerprint Sensor vendor: Validity Sensors, Inc. physical id: 9 bus info: usb@1:9 version: 1.64 serial: 748688d914d0 capabilities: usb-2.00 configuration: maxpower=100mA speed=12Mbit/s *-usbhost:1 product: xHCI Host Controller vendor: Linux 5.2.8-arch1-1-ARCH xhci-hcd physical id: 1 bus info: usb@2 logical name: usb2 version: 5.02 capabilities: usb-3.00 configuration: driver=hub slots=6 speed=5000Mbit/s *-usb description: USB hub product: USB3.0 Hub vendor: VIA Labs, Inc. physical id: 4 bus info: usb@2:4 version: 52.85 capabilities: usb-3.00 configuration: driver=hub slots=4 speed=5000Mbit/s *-usb description: USB hub product: USB3.0 Hub vendor: VIA Labs, Inc. physical id: 1 bus info: usb@2:4.1 version: 52.81 capabilities: usb-3.00 configuration: driver=hub slots=4 speed=5000Mbit/s *-usb description: Communication device product: OneLink+ Giga vendor: Lenovo physical id: 3 bus info: usb@2:4.1.3 version: 30.01 serial: 00001F000000 capabilities: usb-3.00 ethernet configuration: driver=cdc_ether maxpower=256mA speed=5000Mbit/s *-generic:2 description: Signal processing controller product: Sunrise Point-LP Thermal subsystem vendor: Intel Corporation physical id: 14.2 bus info: pci@0000:00:14.2 version: 21 width: 64 bits clock: 33MHz capabilities: pm msi cap_list configuration: driver=intel_pch_thermal latency=0 resources: irq:18 memory:f124c000-f124cfff *-communication:0 description: Communication controller product: Sunrise Point-LP CSME HECI #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 21 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei_me latency=0 resources: irq:127 memory:f124d000-f124dfff *-communication:1 description: Serial controller product: Sunrise Point-LP Active Management Technology - SOL vendor: Intel Corporation physical id: 16.3 bus info: pci@0000:00:16.3 version: 21 width: 32 bits clock: 66MHz capabilities: msi pm 16550 cap_list configuration: driver=serial latency=0 resources: irq:19 ioport:e080(size=8) memory:f1251000-f1251fff *-storage description: SATA controller product: Sunrise Point-LP SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 17 bus info: pci@0000:00:17.0 version: 21 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:126 memory:f1248000-f1249fff memory:f1250000-f12500ff ioport:e088(size=8) ioport:e090(size=4) ioport:e060(size=32) memory:f124e000-f124e7ff *-pci:0 description: PCI bridge product: Sunrise Point-LP PCI Express Root Port #1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: f1 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:122 memory:f1100000-f11fffff *-generic description: Unassigned class product: RTS525A PCI Express Card Reader vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=rtsx_pci latency=0 resources: irq:124 memory:f1100000-f1100fff *-pci:1 description: PCI bridge product: Sunrise Point-LP PCI Express Root Port #3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: f1 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:123 memory:f1000000-f10fffff *-network description: Wireless interface product: Wireless 8260 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlp4s0 version: 3a serial: e4:a7:a0:c6:d2:5c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=5.2.8-arch1-1-ARCH firmware=36.8fd77bb3.0 ip=192.168.1.162 latency=0 link=yes multicast=yes wireless=IEEE 802.11 resources: irq:129 memory:f1000000-f1001fff *-isa description: ISA bridge product: Sunrise Point-LP LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 21 width: 32 bits clock: 33MHz capabilities: isa bus_master configuration: latency=0 *-memory UNCLAIMED description: Memory controller product: Sunrise Point-LP PMC vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 21 width: 32 bits clock: 33MHz (30.3ns) configuration: latency=0 resources: memory:f1244000-f1247fff *-multimedia description: Audio device product: Sunrise Point-LP HD Audio vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 21 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=snd_hda_intel latency=64 resources: irq:131 memory:f1240000-f1243fff memory:f1230000-f123ffff *-serial description: SMBus product: Sunrise Point-LP SMBus vendor: Intel Corporation physical id: 1f.4 bus info: pci@0000:00:1f.4 version: 21 width: 64 bits clock: 33MHz configuration: driver=i801_smbus latency=0 resources: irq:16 memory:f124f000-f124f0ff ioport:efa0(size=32) *-network description: Ethernet interface product: Ethernet Connection I219-LM vendor: Intel Corporation physical id: 1f.6 bus info: pci@0000:00:1f.6 logical name: enp0s31f6 version: 21 serial: 54:ee:75:b0:32:79 capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k firmware=0.13-4 latency=0 link=no multicast=yes port=twisted pair resources: irq:128 memory:f1200000-f121ffff *-battery product: 00HW029 vendor: SMP physical id: 1 slot: Front capacity: 52060mWh configuration: voltage=15.2V *-network description: Ethernet interface physical id: 2 logical name: eth0 serial: 00:50:b6:d5:58:30 capabilities: ethernet physical configuration: broadcast=yes driver=cdc_ether driverversion=22-Aug-2005 firmware=CDC Ethernet Device link=no multicast=yes If needed, I could compile from source and try to provide better backtraces and such, but that will have to wait until tonight as I have work! Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/1 ------------------------------------------------------------------------ On 2019-08-13T23:36:31+00:00 Smokenicotine wrote: Can confirm this is also happening to me. Segmentation fault (core dumped) for xfce4-display-settings. Has been like this since 4.14. Problem exists on clean install as well. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/2 ------------------------------------------------------------------------ On 2019-08-14T03:02:41+00:00 Stanna-g wrote: i am experiencing the same issue when opening the Display properties. reverting to an older xfce4-settings did not fix the issue nor did a complete reinstall. still persists. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/3 ------------------------------------------------------------------------ On 2019-08-14T03:20:29+00:00 Andreldm-2 wrote: (In reply to Christian Herold from comment #0) > Since the update to 4.14, xfce4-display-settings seg faults on my Archlinux. I also use Arch, but I can't reproduce this crash. Do you have an external monitor plugged? The crash happens when a single monitor is in use? > The stack trace is not really helpful That's because the binary from the repository doesn't have debug symbols. (In reply to Bryson Reese from comment #1) > Here is valgrind output from running xfce4-settings-manager, then clicking > on display, then pressing "update profile" Can you crash xfce4-display-settings without opening it in Settings Manager? > If needed, I could compile from source and try to provide better backtraces > and such, but that will have to wait until tonight as I have work! Backtraces (gdb) would be helpful, if they are too long, please attach a file. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/4 ------------------------------------------------------------------------ On 2019-08-14T06:12:55+00:00 Chris-herold wrote: > I also use Arch, but I can't reproduce this crash. Do you have an external monitor plugged? The crash happens when a single monitor is in use? Yes there are two external monitors connected. > Can you crash xfce4-display-settings without opening it in Settings Manager? When I make a fresh boot and start the display settings using Settings Manager, it works well for the first time. But when I close the display-settings and try again to open using Settings Manager, then it is not working. > Backtraces (gdb) would be helpful, if they are too long, please attach a file. Could I build the display-manager standalone? Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/5 ------------------------------------------------------------------------ On 2019-08-14T07:35:19+00:00 Demolitions+xfce wrote: I have the same problem, however it's not xfce4-settings-manager that crashes for me, but the daemon xfsettingsd, and when it segfaults, xfce4 -display-settings crashes. And I managed to find that it segfaults as soon as you connect the THIRD monitor. It's stable with one or two monitors, and crashes when he detects the third, whichever it is. I can provide a log from coredumpctl https://pastebin.com/raw/0h0S4biu and a log obtained launching 'XFSETTINGSD_DEBUG=1 xfsettingsd --replace --no-daemon' https://pastebin.com/raw/4yJNvGhi Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/6 ------------------------------------------------------------------------ On 2019-08-14T08:33:37+00:00 Demolitions+xfce wrote: Managed to compile xfce4-settings with debug symbols on, here is the same coredump https://pastebin.com/raw/MY5aD0RG and a gdb trace from the same coredump https://pastebin.com/raw/2gvssvuL I will add that this issue is not present on 4.12.4 Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/7 ------------------------------------------------------------------------ On 2019-08-14T20:37:15+00:00 Simon Steinbeiß wrote: Created attachment 8887 Very rough patch Hi, please try if the attached patch fixes the problem for you! Thanks! Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/8 ------------------------------------------------------------------------ On 2019-08-15T09:02:50+00:00 Arch-9 wrote: Patch works for more then 2 Displays - thank you. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/9 ------------------------------------------------------------------------ On 2019-08-16T06:57:14+00:00 Demolitions+xfce wrote: Does not work for me, xfsettingsd segfaults with the same coredump as before. I verified that display-profiles.c is changed before compiling, but for me it still segfaults at line 135, when connecting the third screen. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/10 ------------------------------------------------------------------------ On 2019-08-16T21:11:50+00:00 Z-spam-b wrote: Created attachment 8899 Add noutput as parameter, remove call to g_strv_length Since I am affected by the same problem, i tried to debug it. For me, g_strv_length reports inconsistent values, I've seen 4, 9 and 12 while it should be 3. Obviously, this crashes. This patch makes the number of outputs a parameter to the function call. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/11 ------------------------------------------------------------------------ On 2019-08-16T21:35:30+00:00 Z-spam-b wrote: Hm, thinking about it: g_strv_length requires a NULL-terminated array. Currently, I can't test it, but would it suffice to extend the array with a NULL-element, i.e. adding +1 to the calls to g_new0 when initializing the array? Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/12 ------------------------------------------------------------------------ On 2019-08-16T21:42:25+00:00 Simon Steinbeiß wrote: @Andreas: Thanks for helping to debug this! Unfortunately I'm not close to a real multi-monitor setup which is why it's impossible for me to properly debug the problem (I obviously also can't reproduce it). Your conclusion is very plausible, I guess I would have had to initialize it in a NULL-terminated manner. The old way of freeing the array also has to be replaced with g_strfreev in the functions calling get_profiles and that also requires a NULL-terminated array. In any case, your current patch does no harm and surely works. Let's see what the testers that still experienced issues (like Fanfurlio) say. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/13 ------------------------------------------------------------------------ On 2019-08-18T15:38:12+00:00 Simon Steinbeiß wrote: Created attachment 8910 Proper patch, assuring correct null-terminated gchar** Ok, so here goes a proper patch. As far as I have understood the testing and feedback, this should resolve the bug. In any case, please test thoroughly! Thanks! Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/14 ------------------------------------------------------------------------ On 2019-08-18T15:59:27+00:00 Landry-o wrote: Comment on attachment 8910 Proper patch, assuring correct null-terminated gchar** Fwiw, i've tested the patch on two laptops (single screen) and a desktop (dual screen) - all with 4.14 on OpenBSD - and that solves the xfce4 -display-settings crashes i was seeing. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/15 ------------------------------------------------------------------------ On 2019-08-18T18:24:01+00:00 Daniel Harding wrote: Created attachment 8912 Tweaked version of patch posted by Landry Breuil This patch is the same as the one posted by Landry Breuil, except that it drops explicitly assigning NULL to the last element of display_infos, as that is already taken care of by g_new0. On my 3-display system, xfce4-display-settings was failing 100% of the time without the patch, and with this patch, it works fine. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/16 ------------------------------------------------------------------------ On 2019-08-19T04:48:22+00:00 clidee wrote: can someone explain how to apply the patch? Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/17 ------------------------------------------------------------------------ On 2019-08-19T07:37:19+00:00 Demolitions+xfce wrote: On my 3-screen system (sorry to have kept you waiting, I only have access to it at work) both patches work without a hitch. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/18 ------------------------------------------------------------------------ On 2019-08-19T13:25:29+00:00 Simon Steinbeiß wrote: Created attachment 8922 Assuring correct null-terminated gchar** and profile matching When testing the patch a bit more I noticed that now that the array is null-terminated it contains one more element that needs to be subtracted when comparing the amount of displays in a profile and the ones that are currently connected. Now I have extended the patch in this direction and from my point of view it's ready to merge. Feel free to give it a last try with both saving profiles or just retaining the default settings. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/19 ------------------------------------------------------------------------ On 2019-08-19T14:15:40+00:00 Z-spam-b wrote: For me, noutput correctly contains the number of connected displays, since g_strv_length() does not count the last NULL element. I'm unsure whether subtracting 1 is really necessary here? If I save a profile with the old patch, it is correctly saved and available in the GUI. If I open xfce4-display-settings with your new patch, the previously saved profile is not available. If I try to save a profile with your new patch, it asks me if I want to overwrite the existing profile "xxx", however, this profile is not displayed. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/20 ------------------------------------------------------------------------ On 2019-08-19T14:20:30+00:00 Simon Steinbeiß wrote: Interesting. Can you check if after starting your session the profile you saved is correctly enabled too? (After startup it needs to have the checkmark, otherwise it wasn't matched and activated.) Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/21 ------------------------------------------------------------------------ On 2019-08-19T15:02:21+00:00 Simon Steinbeiß wrote: Let me be more precise: I now see the behavior you're describing. I was focusing on xfsettingsd/displays.c, which handles e.g. the session startup. For some reason I get different amount of displays in the display dialog and xfsettingsd. I'll investigate a little more... Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/22 ------------------------------------------------------------------------ On 2019-08-19T15:23:01+00:00 Z-spam-b wrote: Yes, the checkmark is there - good that you were able to reproduce it. I can also reproduce your point, I'm getting 9 outputs from helper->resources->noutput - that makes perfect sense, since xrandr reports 9 outputs for me, but only 3 of them have connected screens. xfce4-display-settings reports only 3 outputs, which is just the ones actually having screens connected. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/23 ------------------------------------------------------------------------ On 2019-08-19T16:13:37+00:00 Simon Steinbeiß wrote: Created attachment 8925 Part1: Assure correct gchar Ok, so here goes part one again, which fixes the bug that was reported here. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/24 ------------------------------------------------------------------------ On 2019-08-19T16:15:51+00:00 Simon Steinbeiß wrote: Created attachment 8926 Part2: Fix profile matching in xfsettingsd The second patch fixes profile matching in xfsettingsd, i.e. when connecting a new display or when starting up the session. (Previously saved profiles were not loaded correctly.) Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/25 ------------------------------------------------------------------------ On 2019-08-19T16:36:21+00:00 Z-spam-b wrote: Thanks, this seems to work fine - at least, xfsettingsd correctly restores the screen configuration upon startup and xfce4-display- settings reports the profiles and saving and loading works, applying profiles and settings as well, of course. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/26 ------------------------------------------------------------------------ On 2019-08-19T16:48:41+00:00 Simon Steinbeiß wrote: Great! Thanks for helping with debugging this. Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/27 ------------------------------------------------------------------------ On 2019-08-19T22:04:50+00:00 Gitbot wrote: Simon Steinbeiss referenced this bugreport in commit ae8221b23f72f62276bd0a0ffe129329b217a612 display: Assure correct gchar** (Bug #15816) https://git.xfce.org/xfce/xfce4-settings/commit?id=ae8221b23f72f62276bd0a0ffe129329b217a612 Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/28 ------------------------------------------------------------------------ On 2019-08-21T10:19:34+00:00 Gitbot wrote: Simon Steinbeiss referenced this bugreport in commit ae8221b23f72f62276bd0a0ffe129329b217a612 display: Assure correct gchar** (Bug #15816) https://git.xfce.org/xfce/xfce4-settings/commit?id=ae8221b23f72f62276bd0a0ffe129329b217a612 Reply at: https://bugs.launchpad.net/ubuntu/+source/xfce4-settings/+bug/1841409/comments/29 ** Changed in: xfce4-settings Status: Unknown => Fix Released ** Changed in: xfce4-settings Importance: Unknown => Medium -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1841409 Title: xfce4-display-settings SGISEGV in display_settings_get_profiles To manage notifications about this bug go to: https://bugs.launchpad.net/xfce4-settings/+bug/1841409/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
