** Description changed:

  Upstream raspberrypi patchset 2020-02-12
  
-   Ported from the following raspberrypi branch:
-     rpi-5.4.y
-   from https://github.com/raspberrypi/linux.git
+   Ported from the following raspberrypi branch:
+     rpi-5.4.y
+   from https://github.com/raspberrypi/linux.git
+ 
+ ARM: dts: Move audio node under the vchiq parent
+ staging: vchiq_arm: Add a matching unregister call
+ staging: vchiq_arm: Give vchiq children DT nodes
+ staging: vchiq_arm: Register a platform device for audio
+ ARM: dts: Remove CMA allocation from Pi 4 dts
+ ARM: dts: Correct SoC name
+ pcie-brcmstb: Correct SoC name
+ hwrng: iproc-rng200: Correct SoC name
+ thermal: brcmstb_thermal: Correct SoC name
+ bcm2835-dma: Correct SoC name
+ staging/vchiq_arm: Fix bcm2711 compatible string
+ Revert "bcm2711: Retain support for old dtbs"
+ ARM: dts: Rebuild downstream DTS files
+ ARM: dts: bcm2711: fix soc's node dma-ranges
+ ARM: dts: bcm2711-rpi-4: Enable GENET support
+ ARM: dts: bcm2711: force CMA into first GB of memory
+ ARM: dts: Add minimal Raspberry Pi 4 support
+ ARM: dts: Clean out downstream BCM2711/2838 files
+ ARM: dts: Revert all changes to upstream dts files
+ brcmfmac: Increase power saving delay to 2s
+ Revert "brcmfmac: Disable power management"
+ overlays: add hdmi-backlight-hwhack-gpio-overlay
+ SQUASH: Fix spi driver compiler warnings
+ overlays: Fix mcp23017's addr parameter
+ overlays: dwc2: Increase RX FIFO size
+ configs: Add NFS 4.2 support
+ overlays: Add ssd1306-spi, ssh1106-spi, ssd-1351-spi
+ ARM: dts: Add sd_poll_once dtparam to bcm283x/2711
+ Revert "staging: vchiq_arm: Register a platform device for audio"
+ overlays: Correct the eth_led* colour assignments
+ usb: xhci: Raspberry Pi FW loader for VIA VL805
+ tty: amba-pl011: Avoid rare write-when-full error
+ ARM: dts: Remove bcm2838-rpi-4-b.dts
+ bcm2838.dtsi: Use BCM2711 PCIe compatible string
+ pcie-brcmstb: Bounce buffer support is for BCM2711B0
+ ARM: dts: Declare RPi 4B SD card power regulator
+ mmc: sdhci-iproc: Fix vmmc regulators on iProc
+ pisound: Added reading Pisound board hardware revision and exposing it (#3425)
+ adds LED OFF feature to HiFiBerry DAC+/DAC+PRO sound cards
+ adds LED OFF feature to HiFiBerry DAC+ADC sound card
+ adds LED OFF feature to HiFiBerry DAC+ADC PRO sound card
+ Fix i2c-pwm-pca9685a overlay
+ tty: amba-pl011: Add un/throttle support

** Description changed:

  Upstream raspberrypi patchset 2020-02-12
  
    Ported from the following raspberrypi branch:
      rpi-5.4.y
    from https://github.com/raspberrypi/linux.git
  
  ARM: dts: Move audio node under the vchiq parent
  staging: vchiq_arm: Add a matching unregister call
  staging: vchiq_arm: Give vchiq children DT nodes
  staging: vchiq_arm: Register a platform device for audio
  ARM: dts: Remove CMA allocation from Pi 4 dts
  ARM: dts: Correct SoC name
  pcie-brcmstb: Correct SoC name
  hwrng: iproc-rng200: Correct SoC name
  thermal: brcmstb_thermal: Correct SoC name
  bcm2835-dma: Correct SoC name
  staging/vchiq_arm: Fix bcm2711 compatible string
  Revert "bcm2711: Retain support for old dtbs"
  ARM: dts: Rebuild downstream DTS files
  ARM: dts: bcm2711: fix soc's node dma-ranges
  ARM: dts: bcm2711-rpi-4: Enable GENET support
  ARM: dts: bcm2711: force CMA into first GB of memory
  ARM: dts: Add minimal Raspberry Pi 4 support
  ARM: dts: Clean out downstream BCM2711/2838 files
  ARM: dts: Revert all changes to upstream dts files
  brcmfmac: Increase power saving delay to 2s
- Revert "brcmfmac: Disable power management"
  overlays: add hdmi-backlight-hwhack-gpio-overlay
  SQUASH: Fix spi driver compiler warnings
  overlays: Fix mcp23017's addr parameter
  overlays: dwc2: Increase RX FIFO size
  configs: Add NFS 4.2 support
  overlays: Add ssd1306-spi, ssh1106-spi, ssd-1351-spi
  ARM: dts: Add sd_poll_once dtparam to bcm283x/2711
  Revert "staging: vchiq_arm: Register a platform device for audio"
  overlays: Correct the eth_led* colour assignments
  usb: xhci: Raspberry Pi FW loader for VIA VL805
  tty: amba-pl011: Avoid rare write-when-full error
  ARM: dts: Remove bcm2838-rpi-4-b.dts
  bcm2838.dtsi: Use BCM2711 PCIe compatible string
  pcie-brcmstb: Bounce buffer support is for BCM2711B0
  ARM: dts: Declare RPi 4B SD card power regulator
  mmc: sdhci-iproc: Fix vmmc regulators on iProc
  pisound: Added reading Pisound board hardware revision and exposing it (#3425)
  adds LED OFF feature to HiFiBerry DAC+/DAC+PRO sound cards
  adds LED OFF feature to HiFiBerry DAC+ADC sound card
  adds LED OFF feature to HiFiBerry DAC+ADC PRO sound card
  Fix i2c-pwm-pca9685a overlay
  tty: amba-pl011: Add un/throttle support

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1862934

Title:
  focal:linux-raspi2-5.4: Upstream raspberrypi patchset 2020-02-12

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-raspi2-5.4/+bug/1862934/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to