apport information ** Tags added: apport-collected bionic
** Description changed: I tried the following on bluex version 5.48 and 5.52. I have set ControllerMode to "le" in main.conf. Using bluetootctl, when i turn on the advertisement using command "advertise on" , I get 0x02 advertisement flag. which means "BR/EDR Not Supported" (Bit 2) is not set. Now , if i restart the bluetooth service, and turn on the advertisement again, I get 0x06 advertisement flags. Here is my main.conf [General]# Default adaper name # Defaults to 'BlueZ X.YZ' #Name = BlueZ# Default device class. Only the major and minor device class bits are # considered. Defaults to '0x000000'. Class = 0x000100# How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0# How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever #PairableTimeout = 0# Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. Default is 60. #AutoConnectTimeout = 60# Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd# Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to 'true'. #ReverseServiceDiscovery = true# Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. #NameResolving = true# Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. #DebugKeys = false# Restricts all controllers to the specified transport. Default value # is "dual", i.e. both BR/EDR and LE enabled (when supported by the HW). # Possible values: "dual", "bredr", "le" ControllerMode = le# Enables Multi Profile Specification support. This allows to specify if # system supports only Multiple Profiles Single Device (MPSD) configuration # or both Multiple Profiles Single Device (MPSD) and Multiple Profiles Multiple # Devices (MPMD) configurations. # Possible values: "off", "single", "multiple" #MultiProfile = off# Permanently enables the Fast Connectable setting for adapters that # support it. When enabled other devices can connect faster to us, # however the tradeoff is increased power consumptions. This feature # will fully work only on kernel version 4.1 and newer. Defaults to # 'false'. #FastConnectable = false[Policy]# The ReconnectUUIDs defines the set of remote services that should try # to be reconnected to in case of a link loss (link supervision # timeout). The policy plugin should contain a sane set of values by # default, but this list can be overridden here. By setting the list to # empty the reconnection feature gets disabled. #ReconnectUUIDs=00001112-0000-1000-8000-00805f9b34fb, 0000111f-0000-1000-8000-00805f9b34fb, 0000110a-0000-1000-8000-00805f9b34fb# ReconnectAttempts define the number of attempts to reconnect after a link # lost. Setting the value to 0 disables reconnecting feature. #ReconnectAttempts=7# ReconnectIntervals define the set of intervals in seconds to use in between # attempts. # If the number of attempts defined in ReconnectAttempts is bigger than the # set of intervals the last interval is repeated until the last attempt. #ReconnectIntervals=1, 2, 4, 8, 16, 32, 64# AutoEnable defines option to enable all controllers when they are found. # This includes adapters present on start as well as adapters that are plugged # in later on. Defaults to 'false'. AutoEnable=true And bluetooth.service [Unit] Description=Bluetooth service Documentation=man:bluetoothd(8) ConditionPathIsDirectory=/sys/class/bluetooth[Service] Type=dbus BusName=org.bluez ExecStart=/usr/libexec/bluetooth/bluetoothd -d -n --configfile /etc/bluetooth/main.conf NotifyAccess=main #WatchdogSec=10 #Restart=on-failure CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE LimitNPROC=1 ProtectHome=true ProtectSystem=full[Install] WantedBy=bluetooth.target Alias=dbus-org.bluez.service + --- + ProblemType: Bug + ApportVersion: 2.20.9-0ubuntu7.12 + Architecture: amd64 + CurrentDesktop: ubuntu:GNOME + DistroRelease: Ubuntu 18.04 + InstallationDate: Installed on 2019-10-28 (147 days ago) + InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) + InterestingModules: bnep btusb bluetooth + Lsusb: + Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 001 Device 003: ID 27c6:5395 + Bus 001 Device 004: ID 0c45:671d Microdia + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + MachineType: Dell Inc. Precision 5530 + NonfreeKernelModules: nvidia_modeset nvidia + Package: bluez 5.48-0ubuntu3.3 + PackageArchitecture: amd64 + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.15.0-91-generic root=UUID=1b13cc02-9bc8-4a25-b4cf-b5cf5285e841 ro quiet splash psmouse.proto=bare vt.handoff=1 + ProcVersionSignature: Ubuntu 4.15.0-91.92-generic 4.15.18 + Tags: bionic + Uname: Linux 4.15.0-91-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip docker lpadmin plugdev sambashare sudo vboxusers + _MarkForUpload: True + dmi.bios.date: 06/27/2019 + dmi.bios.vendor: Dell Inc. + dmi.bios.version: 1.12.0 + dmi.board.name: 0NFGCT + dmi.board.vendor: Dell Inc. + dmi.board.version: A00 + dmi.chassis.type: 10 + dmi.chassis.vendor: Dell Inc. + dmi.modalias: dmi:bvnDellInc.:bvr1.12.0:bd06/27/2019:svnDellInc.:pnPrecision5530:pvr:rvnDellInc.:rn0NFGCT:rvrA00:cvnDellInc.:ct10:cvr: + dmi.product.family: Precision + dmi.product.name: Precision 5530 + dmi.sys.vendor: Dell Inc. + hciconfig: ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1868693/+attachment/5340820/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1868693 Title: Incorrect advertise flags in bluetooth beacon using BlueZ To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1868693/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
