Public bug reported: During installation of Focal, I choose to set up custom partitioning. I have two disks, and I setup these two discs in a linux raid.
In addition to the autogenerated GRUB partitions which are created when i designate each of the two disks as boot disks, I create an additional partition which takes part in the raid device (md0). Just after the installer attempts to begin installation, the installer fails. The most descriptive part of the crash report is : comparing device lists: expected: ['/dev/sda2', '/dev/sda2'] found: ['/dev/sdb2', '/dev/sda2'] An error occured handling 'raid-md127': ValueError - RAID array device list does not match. Missing: set() Extra: {'/dev/sdb2'} In an attempt to work around this, I jumped into a shell just after the installer started. I then created a linux raid manually, and once a raid was in place, proceeded with the installer. I then chose to install Ubuntu onto the existing raid. The same error was given. It seems that no matter what I try, the installer fails when I attempt to install onto a linux raid. Installation on a plain partition works fine. ** Affects: subiquity (Ubuntu) Importance: Undecided Status: New ** Attachment added: "Creash report from the installer" https://bugs.launchpad.net/bugs/1876848/+attachment/5366551/+files/1588578680.390293360.install_fail.crash -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876848 Title: Installation of Focal on a linux raid consistently fails To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/subiquity/+bug/1876848/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs