I'd like to add that this same technique revealed sensor values on my system as well. Booted to Windows and ran HWINFO, the chip came back as an NCT6685D. In Linux, modprobe successfully loaded nct6683 but had no data. After forcing load in exactly the same manner it now functions as expected.
Relevant system/sensor info: # sensors-detect version 3.6.0 # System: Micro-Star International Co., Ltd. H310 Gaming Trident3 (MS-B920) [1.0] # Board: Micro-Star International Co., Ltd. MS-B9201 # Kernel: 5.4.0-31-generic x86_64 # Processor: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz (6/158/10) iwlwifi_1-virtual-0 Adapter: Virtual device temp1: +42.0°C nct6683-isa-0a00 Adapter: ISA adapter VIN5: 576.00 mV (min = +0.00 V, max = +0.00 V) VIN3: 736.00 mV (min = +0.00 V, max = +0.00 V) VIN2: 1.25 V (min = +0.00 V, max = +0.00 V) VIN3: 736.00 mV (min = +0.00 V, max = +0.00 V) VCC: 3.30 V (min = +0.00 V, max = +0.00 V) VSB: 3.30 V (min = +0.00 V, max = +0.00 V) AVSB: 3.30 V (min = +0.00 V, max = +0.00 V) VTT: 1.06 V (min = +0.00 V, max = +0.00 V) VBAT: 3.20 V (min = +0.00 V, max = +0.00 V) fan1: 879 RPM (min = 0 RPM) PECI 0.0: +46.0°C (low = +0.0°C) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C) sensor = Intel PECI Thermistor 14: +48.5°C (low = +0.0°C) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C) sensor = thermistor Diode 1 (curr): +127.5°C (low = +0.0°C) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C) sensor = thermal diode PECI 0.0: +46.0°C (low = +0.0°C) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C) sensor = Intel PECI PCH CHIP: +0.0°C (low = +0.0°C) (high = +0.0°C, hyst = +0.0°C) (crit = +0.0°C) intrusion0: OK beep_enable: disabled acpitz-acpi-0 Adapter: ACPI interface temp1: +27.8°C (crit = +119.0°C) pch_cannonlake-virtual-0 Adapter: Virtual device temp1: +74.0°C coretemp-isa-0000 Adapter: ISA adapter Package id 0: +48.0°C (high = +82.0°C, crit = +100.0°C) Core 0: +46.0°C (high = +82.0°C, crit = +100.0°C) Core 1: +47.0°C (high = +82.0°C, crit = +100.0°C) Core 2: +46.0°C (high = +82.0°C, crit = +100.0°C) Core 3: +47.0°C (high = +82.0°C, crit = +100.0°C) Core 4: +50.0°C (high = +82.0°C, crit = +100.0°C) Core 5: +47.0°C (high = +82.0°C, crit = +100.0°C) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1858369 Title: nct6683 not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lm-sensors/+bug/1858369/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
