Public bug reported: Ubuntu 20.04 LTS ARM (Running on a raspberry Pi)
******** Logfile: ******** NetworkManager[1345]: <info> [1593736912.7230] policy: auto-activating connection 'hotspot-inside' (37c28408-978a-48e0-a135-9867e3a45c64) NetworkManager[1345]: <info> [1593736912.7248] device (wlx00c0caab435c): Activation: starting connection 'hotspot-inside' (37c28408-978a-48e0-a135-9867e3a45c64) NetworkManager[1345]: <info> [1593736912.7252] device (wlx00c0caab435c): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed') NetworkManager[1345]: <info> [1593736912.7261] manager: NetworkManager state is now CONNECTING NetworkManager[1345]: <info> [1593736912.7449] device (wlx00c0caab435c): state change: prepare -> config (reason 'none', sys-iface-state: 'managed') NetworkManager[1345]: <info> [1593736912.7459] device (wlx00c0caab435c): Activation: (wifi) access point 'hotspot-inside' has security, but secrets are required. NetworkManager[1345]: <info> [1593736912.7460] device (wlx00c0caab435c): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed') NetworkManager[1345]: <info> [1593736912.7530] device (wlx00c0caab435c): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed') NetworkManager[1345]: <info> [1593736912.7557] device (wlx00c0caab435c): state change: prepare -> config (reason 'none', sys-iface-state: 'managed') NetworkManager[1345]: <info> [1593736912.7566] device (wlx00c0caab435c): Activation: (wifi) connection 'hotspot-inside' has security, and secrets exist. No new secrets needed. NetworkManager[1345]: <info> [1593736912.7571] Config: added 'ssid' value 'hotspot-inside' NetworkManager[1345]: <info> [1593736912.7572] Config: added 'mode' value '2' NetworkManager[1345]: <info> [1593736912.7573] Config: added 'frequency' value '2412' NetworkManager[1345]: <info> [1593736912.7574] Config: added 'key_mgmt' value 'WPA-PSK WPA-PSK-SHA256 FT-PSK' NetworkManager[1345]: <info> [1593736912.7574] Config: added 'psk' value '<hidden>' NetworkManager[1345]: <info> [1593736912.7575] Config: added 'proto' value 'RSN' NetworkManager[1345]: <info> [1593736912.7575] Config: added 'pairwise' value 'CCMP' NetworkManager[1345]: <info> [1593736912.7576] Config: added 'group' value 'CCMP' wpa_supplicant[1358]: Note: nl80211 driver interface is not designed to be used with ap_scan=2; this can result in connection failures wpa_supplicant[1358]: Using interface wlx00c0caab435c with hwaddr 00:c0:ca:ab:43:5c and ssid "hotspot-inside" ************************************* NetworkManager Connection definition: ************************************* [connection] id=hotspot-inside uuid=37c28408-978a-48e0-a135-9867e3a45c64 type=wifi autoconnect-priority=5 permissions= timestamp=1593537574 [wifi] mac-address=00:C0:CA:AB:43:5C mac-address-blacklist= mode=ap seen-bssids=00:C0:CA:AB:43:5C;DC:A6:32:3A:67:FC; ssid=hotspot-inside [wifi-security] group=ccmp; key-mgmt=wpa-psk pairwise=ccmp; proto=rsn; psk=<XXX> [ipv4] dns-search= method=shared [ipv6] addr-gen-mode=stable-privacy dns-search= method=ignore [proxy] ***************************** USB Network Card information: ***************************** *-network:1 description: Wireless interface physical id: 2 bus info: usb@1:1.1 logical name: wlx00c0caab435c serial: 00:c0:ca:ab:43:5c capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl88XXau ip=10.42.0.1 multicast=yes wireless=IEEE 802.11bgn (The device is an Alfa AWUS036AC, using the driver https://github.com /aircrack-ng/rtl8812au - Version 5.6.4.2) ************************** What I expected to happen: ************************** I expect my windows 10 PC to be able to connect to a hotspot if I set one up ********************** What happened instead: ********************** It can't connect to the AP *********************** Logs of when I connect: *********************** wpa_supplicant[1358]: wlx00c0caab435c: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 ... this is the only line that appears in the logs and on the windows machine, I get the very helpful description of "Can't connect"... ****************** What I did so far: ****************** I tried reading about the ap_scan modes what I could find. The only two references I did find, was: - that ap_mode is a setting you can set in wpa_supplicant, however, I'm using NetworkManager. I checked the references and I don't find a way to set 'ap_mode=1' - all other references were bugreports, which led me to here. I ordered a new Network Card, using a different chipset, to see if the problem persists. Sadly it didn't arrive yet. ** Affects: cloud-init (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1886169 Title: "nl80211 driver interface is not designed to be used with ap_scan=2" To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cloud-init/+bug/1886169/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
