Hello Chris, I want to thank you for your help on this matter. I ran a couple of smartctl commands, and below you will find the results Attached is also the actual report, I think it passed. Thnx again.
======================================================================================================================================== ubuntu@ubuntu:~$ smartctl Command 'smartctl' not found, but can be installed with: sudo apt install smartmontools ubuntu@ubuntu:~$ sudo apt install smartmontools Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: gsmartcontrol smart-notifier mailx | mailutils The following NEW packages will be installed: smartmontools 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 525 kB of archives. After this operation, 2,087 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu focal/main amd64 smartmontools amd64 7.1-1build1 [525 kB] Fetched 525 kB in 1s (649 kB/s) Selecting previously unselected package smartmontools. (Reading database ... 187343 files and directories currently installed.) Preparing to unpack .../smartmontools_7.1-1build1_amd64.deb ... Unpacking smartmontools (7.1-1build1) ... Setting up smartmontools (7.1-1build1) ... Created symlink /etc/systemd/system/smartd.service → /lib/systemd/system/smartmo ntools.service. Created symlink /etc/systemd/system/multi-user.target.wants/smartmontools.servic e → /lib/systemd/system/smartmontools.service. Processing triggers for man-db (2.9.1-1) ... Processing triggers for systemd (245.4-4ubuntu3) ... ubuntu@ubuntu:~$ smartctl smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org ERROR: smartctl requires a device name as the final command-line argument. Use smartctl -h to get a usage summary ubuntu@ubuntu:~$ sudo apt-get install smartmontools Reading package lists... Done Building dependency tree Reading state information... Done smartmontools is already the newest version (7.1-1build1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ubuntu@ubuntu:~$ sudo smartctl -s on /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. ubuntu@ubuntu:~$ sudo smartctl -c /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. *Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.* Total time to complete Offline data collection: (13320) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 150) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. ubuntu@ubuntu:~$ sudo smartctl -t long /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === *Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.Testing has begun.* Please wait 150 minutes for test to complete. Test will complete after Sun Jul 5 19:19:22 2020 UTC Use smartctl -X to abort test. ubuntu@ubuntu:~$ sudo smartctl -l selftest /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 20 - ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD7500LPCX-00HWST0 Serial Number: WD-WXB1A53W9474 LU WWN Device Id: 5 0014ee 60392c731 Firmware Version: 01.01A01 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jul 5 21:58:13 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13320) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 150) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 191 188 021 Pre-fail Always - 1416 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 78 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 23 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 233 194 Temperature_Celsius 0x0022 112 105 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 *SMART Error Log Version: 1No Errors Logged* SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 20 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. ubuntu@ubuntu:~$ sudo smartctl -a -d ata /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD7500LPCX-00HWST0 Serial Number: WD-WXB1A53W9474 LU WWN Device Id: 5 0014ee 60392c731 Firmware Version: 01.01A01 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jul 5 21:59:25 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13320) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 150) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 191 188 021 Pre-fail Always - 1416 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 78 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 23 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 233 194 Temperature_Celsius 0x0022 112 105 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 20 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. ubuntu@ubuntu:~$ On Sat, Jul 4, 2020 at 11:15 PM Chris Guiver <1886...@bugs.launchpad.net> wrote: > Thank you for taking the time to report this issue and helping to make > Ubuntu better. > > A quick scan and I see the cause as being related to problems with > device sda > > Jul 4 22:25:54 ubuntu kernel: [ 774.181931] EXT4-fs error (device sda2): > ext4_lookup:1701: inode #38803277: comm dpkg: iget: checksum invalid > Jul 4 22:25:54 ubuntu kernel: [ 774.202471] Aborting journal on device > sda2-8. > Jul 4 22:25:54 ubuntu kernel: [ 774.225978] EXT4-fs (sda2): Remounting > filesystem read-only > > This error caused the file-system to flip RO (to prevent data-loss), and > the installation to subsequently fail. > > I suggest you validate the health of your hardware (esp. disk by > checking it's SMART status using `smartctl`, `gnome-disks` or whichever > tool you prefer) https://help.ubuntu.com/community/Smartmontools. If > you're unfamiliar with these, I suggest seeking support, options > available can be seen at https://discourse.ubuntu.com/t/finding-help/709 > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1886290 > > Title: > Install does not complete, installl app creashes. Wondering how I can > fix it. > > Status in Ubuntu: > New > > Bug description: > I have tried installing version 20 a few times, choosing to leave out > more and more features. The install app crashes, and asks for a reboot. > Please le me know if there is something i can do to fix it. > > ProblemType: Bug > DistroRelease: Ubuntu 20.04 > Package: ubiquity 20.04.15 > ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 > Uname: Linux 5.4.0-26-generic x86_64 > NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair > ApportVersion: 2.20.11-0ubuntu27 > Architecture: amd64 > CasperMD5CheckResult: pass > CasperVersion: 1.445 > CurrentDesktop: ubuntu:GNOME > Date: Sat Jul 4 17:27:49 2020 > InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz > file=/cdrom/preseed/ubuntu.seed maybe-ubiquity quiet splash --- > LiveMediaBuild: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) > ProcEnviron: > LANGUAGE=en_US.UTF-8 > PATH=(custom, no user) > XDG_RUNTIME_DIR=<set> > LANG=en_US.UTF-8 > LC_NUMERIC=C.UTF-8 > SourcePackage: ubiquity > UpgradeStatus: No upgrade log present (probably fresh install) > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+bug/1886290/+subscriptions > ** Attachment added: "drive-report.txt" https://bugs.launchpad.net/bugs/1886290/+attachment/5390198/+files/drive-report.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1886290 Title: Install does not complete, installl app creashes. Wondering how I can fix it. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1886290/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
