for comparison a self-built backport version with "Atheros dynamic user
regulatory testing"
compat: module verification failed: signature and/or required key missing -
tainting kernel
[ 2.820437] Loading modules backported from Linux version
v5.8-0-gbcf876870b95
[ 2.820437] Backport generated by backports.git v5.8-1-0-g79400d9e
[ 2.861508] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0
reset_mode 0
[ 2.924268] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2 irq_mode 0
reset_mode 0
[ 2.975254] ath10k_pci 0000:03:00.0: qca9984/qca9994 hw1.0 target 0x01000000
chip_id 0x00000000 sub 168c:cafe
[ 2.975255] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs
0 testmode 0
[ 2.975576] ath10k_pci 0000:03:00.0: firmware ver 10.4-3.9.0.2-00124 api 5
features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate
crc32 ea4c0777
[ 3.038053] ath10k_pci 0000:04:00.0: qca9984/qca9994 hw1.0 target 0x01000000
chip_id 0x00000000 sub 168c:cafe
[ 3.038054] ath10k_pci 0000:04:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs
0 testmode 0
[ 3.038388] ath10k_pci 0000:04:00.0: firmware ver 10.4-3.9.0.2-00124 api 5
features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate
crc32 ea4c0777
[ 4.209182] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id 0:1 crc32
85498734
[ 4.267400] ath10k_pci 0000:04:00.0: board_file api 2 bmi_id 0:2 crc32
85498734
[ 6.892192] ath10k_pci 0000:03:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp
max-sta 512 raw 0 hwcrypto 1
[ 6.938061] ath10k_pci 0000:04:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp
max-sta 512 raw 0 hwcrypto 1
[ 766.033876] ath: EEPROM regdomain: 0x8114
[ 766.033876] ath: EEPROM indicates we should expect a country code
[ 766.033877] ath: doing EEPROM country->regdmn map search
[ 766.033877] ath: country maps to regdmn code: 0x37
[ 766.033877] ath: Country alpha2 being used: DE
[ 766.033878] ath: Regpair used: 0x37
[ 766.033878] ath: regdomain 0x8114 dynamically updated by user
[ 766.034369] ath: EEPROM regdomain: 0x8114
[ 766.034369] ath: EEPROM indicates we should expect a country code
[ 766.034369] ath: doing EEPROM country->regdmn map search
[ 766.034370] ath: country maps to regdmn code: 0x37
[ 766.034370] ath: Country alpha2 being used: DE
[ 766.034370] ath: Regpair used: 0x37
[ 766.034371] ath: regdomain 0x8114 dynamically updated by user
global
country DE: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 20), (N/A)
(5150 - 5250 @ 80), (N/A, 20), (N/A), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
(5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
(5725 - 5875 @ 80), (N/A, 13), (N/A)
(57000 - 66000 @ 2160), (N/A, 40), (N/A)
phy#0
country DE: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 20), (N/A)
(5150 - 5250 @ 80), (N/A, 20), (N/A), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
(5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
(5725 - 5875 @ 80), (N/A, 13), (N/A)
(57000 - 66000 @ 2160), (N/A, 40), (N/A)
iw phy phy0 info
Frequencies:
* 5180 MHz [36] (20.0 dBm) (no IR)
* 5200 MHz [40] (20.0 dBm) (no IR)
* 5220 MHz [44] (20.0 dBm) (no IR)
* 5240 MHz [48] (20.0 dBm) (no IR)
* 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
* 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
* 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
* 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
* 5500 MHz [100] (26.0 dBm) (no IR, radar detection)
* 5520 MHz [104] (26.0 dBm) (no IR, radar detection)
* 5540 MHz [108] (26.0 dBm) (no IR, radar detection)
* 5560 MHz [112] (26.0 dBm) (no IR, radar detection)
* 5580 MHz [116] (26.0 dBm) (no IR, radar detection)
* 5600 MHz [120] (26.0 dBm) (no IR, radar detection)
* 5620 MHz [124] (26.0 dBm) (no IR, radar detection)
* 5640 MHz [128] (26.0 dBm) (no IR, radar detection)
* 5660 MHz [132] (26.0 dBm) (no IR, radar detection)
* 5680 MHz [136] (26.0 dBm) (no IR, radar detection)
* 5700 MHz [140] (26.0 dBm) (no IR, radar detection)
* 5720 MHz [144] (disabled)
* 5745 MHz [149] (13.0 dBm) (no IR)
* 5765 MHz [153] (13.0 dBm) (no IR)
* 5785 MHz [157] (13.0 dBm) (no IR)
* 5805 MHz [161] (13.0 dBm) (no IR)
* 5825 MHz [165] (13.0 dBm) (no IR)
* 5845 MHz [169] (13.0 dBm) (no IR)
* 5865 MHz [173] (disabled)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1895333
Title:
cannot change the regulatory domain ath10k, QCA9984 (QNAP QWA-AC2600)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1895333/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
