** Description changed: - Upstream raspberrypi patchset 2020-09-16 - Ported from the following raspberrypi branch: - rpi-5.8.y + Ported from the following raspberrypi branch: + rpi-5.8.y from https://github.com/raspberrypi/linux.git + + configs: Enable CHACHA20POLY1305=m + ARM: dts: Limit BT modem baud rate on 3B + overlays: Add adafruit18 and sainsmart18 overlays + staging/fbtft: Add support for display variants + overlays: Minor README correction + configs: Include AppArmor support + configs: Make the evdev module a built-in + ARM: dts: Add required USB power domain for XHCI + overlays: Add spi0-1cs and spi0-2cs + media: i2c: ov9281: Add support for 8 bit readout + media: i2c: tc358743: Only allow supported pixel fmts in set_fmt + media: bcm2835-unicam: Drop WARN on uing direct cache alias + ARM: dts: bcm2835: Use the L2 non-allocating alias + configs: Enable upstream cpufreq driver for pi0/pi1 + configs: Add CONFIG_SPS30=m + configs: Add I2C_HID=m + ARM: dts: bcm2708.dtsi: Don't delete the cpus node + staging: vc04_services: ISP: Fix dmabuf error check in S_CTRL + ARM: dts: bcm2711: Enable support for DDR52 eMMC + RESET_CONTROLLER needs to be activated to compile Broadcom BCM2835 clock support + overlays: Updated MCP3008 compatible strings. + configs: Add CONFIG_UEVENT_HELPER=y + staging: vc04_services: isp: Select MEDIA_CONTROLLER + staging: vc04_services: codec: Select MEDIA_CONTROLLER + staging: media: rpivid: Select MEDIA_CONTROLLER and MEDIA_CONTROLLER_REQUEST_API + media: bcm2835: unicam: Select MEDIA_CONTROLLER and VIDEO_V4L2_SUBDEV_API + configs: Restore CONFIG_CFG80211_WEXT=y + configs: Regenerate defconfigs + dt/overlays: Add PiFace Digital Device Tree Overlay + rtc: rv3028: Refresh RAM on EEPROM write + rtc: rv3028: Write BSM and TCE/TCR to EEPROM + dtoverlays: Add overlay for the PCA953x family of GPIO expanders + update rpi-display-overlay.dts pins for 5.4 + configs: Add USB_GADGET=m to bcmrpi3_defconfig + staging: vc04_services: codec: Fix component enable/disable + staging: vc04_service: codec: Allow start_streaming to update the buffernum + staging: vc04_services: codec: Fix incorrect buffer cleanup + drm/vc4: Set the possible crtcs mask correctly for planes with FKMS + drm/vc4: Increase the number of planes per crtc in FKMS. + overlays: Regenerate upstream-pi4 + config: Add USB gadget support to bcm2711 config + dts: bcm2711: Disable DVP by default + dtoverlays: Add the iio_hwmon driver to correct ADC issues + configs: add CONFIG_SENSORS_IIO_HWMON=m + overlays: Add maxtherm overlay for MAX6675/31855 + overlays: Delete spi0-hw-cs + overlays: Fix sc16is75x overlays w.r.t. serdev + ARM: proc-v7: Force misalignment of early stmia + drm/vc4: Remove UIF from the list of modifiers returned by format_mod_supported + ARM: dts: Add UART skip-init properties for U-boot + configs: Restore missing cgroups to BCM2835-7 + configs: Adding remaining crypto API modules + add CONFIG_CRYPTO_USER_API_HASH=m + bcm2835-dma: Advertise the full DMA range + ARM: dts: 2711 DMA can address 36 bits + staging: vchiq_arm: children inherit DMA config + Revert "raspberrypi-cpufreq: Only report integer pll divisor frequencies" + media: i2c: imx214: select V4L2_FWNODE + brcmfmac: Set timeout value when configuring power save
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1896436 Title: groovy/linux-raspi: Upstream raspberrypi patchset 2020-09-16 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1896436/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
