fishor wrote: > if you have this issue with new 2.6.24 kernel please attach your > complete dmesg. I need to know which hardware affected. > > I installed the 2.6.24-1 386 kernel and when it tries to boot, it generates the following messages:
ata3.00 qc timeout (cmd 0x27) ata3.00 failed to read native max address (err_mask 0x4) that repeated a couple of times. Then I got ata3.00 revaluation failed (errno=-5) and the whole sequence repeated if I remember. I tried adding irqpoll to the boot sequence and it didn't help any. I'm attaching a dmesg dump from booting Gutsy with the 2.26.20-16 kernel which is latest kernel. Thanks Rob [ 0.000000] Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Sep 23 19:50:39 UTC 2007 (Ubuntu 2.6.20-16.32-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fddf800 end: 000000003fedf800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003fedf800 size: 0000000000000800 end: 000000003fee0000 type: 2 [ 0.000000] copy_e820_map() start: 000000003fee0000 size: 0000000000003000 end: 000000003fee3000 type: 4 [ 0.000000] copy_e820_map() start: 000000003fee3000 size: 000000000000d000 end: 000000003fef0000 type: 3 [ 0.000000] copy_e820_map() start: 000000003fef0000 size: 0000000000010000 end: 000000003ff00000 type: 2 [ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: 00000000f4000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fedf800 (usable) [ 0.000000] BIOS-e820: 000000003fedf800 - 000000003fee0000 (reserved) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5eb0 [ 0.000000] Entering add_active_range(0, 0, 261855) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261855 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261855 [ 0.000000] On node 0 totalpages: 261855 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32226 pages, LIFO batch:7 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v000 HP-CPC ) @ 0x000f8060 [ 0.000000] ACPI: RSDT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee3040 [ 0.000000] ACPI: FADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee30c0 [ 0.000000] ACPI: MCFG (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee78c0 [ 0.000000] ACPI: MADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee77c0 [ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x3fee7940 [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20040311) @ 0x3fee7dd0 [ 0.000000] ACPI: DSDT (v001 HP-CPC AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000) [ 0.000000] Detected 3001.007 MHz processor. [ 30.962850] Built 1 zonelists. Total pages: 259810 [ 30.962854] Kernel command line: root=UUID=fb444af4-46f0-480a-8f41-b5657fb15ac4 ro irqpoll [ 30.962871] Misrouted IRQ fixup and polling support enabled [ 30.962872] This may significantly impact system performance [ 30.963002] mapped APIC to ffffd000 (fee00000) [ 30.963005] mapped IOAPIC to ffffc000 (fec00000) [ 30.963008] Enabling fast FPU save and restore... done. [ 30.963011] Enabling unmasked SIMD FPU exception support... done. [ 30.963020] Initializing CPU#0 [ 30.963078] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 30.964147] Console: colour VGA+ 80x25 [ 30.966975] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 30.967391] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 30.987851] Memory: 1025936k/1047420k available (1993k kernel code, 20740k reserved, 900k data, 328k init, 129916k highmem) [ 30.987915] virtual kernel memory layout: [ 30.987916] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 30.987917] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 30.987918] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 30.987919] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 30.987920] .init : 0xc03d9000 - 0xc042b000 ( 328 kB) [ 30.987921] .data : 0xc02f2429 - 0xc03d36d4 ( 900 kB) [ 30.987923] .text : 0xc0100000 - 0xc02f2429 (1993 kB) [ 30.988237] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 31.067050] Calibrating delay using timer specific routine.. 6031.14 BogoMIPS (lpj=12062283) [ 31.067169] Security Framework v1.0.0 initialized [ 31.067213] SELinux: Disabled at boot. [ 31.067266] Mount-cache hash table entries: 512 [ 31.067435] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000 [ 31.067444] monitor/mwait feature present. [ 31.067484] using mwait in idle threads. [ 31.067528] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 31.067598] CPU: L2 cache: 1024K [ 31.067638] CPU: Physical Processor ID: 0 [ 31.067677] CPU: Processor Core ID: 0 [ 31.067716] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000649d 00000000 00000000 [ 31.067727] Compat vDSO mapped to ffffe000. [ 31.067768] Remapping vsyscall page to ffffe000 [ 31.067821] Checking 'hlt' instruction... OK. [ 31.083170] SMP alternatives: switching to UP code [ 31.083568] Early unpacking initramfs... done [ 31.401931] ACPI: Core revision 20060707 [ 31.407805] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 31.417802] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04 [ 31.417919] SMP alternatives: switching to SMP code [ 31.418063] Booting processor 1/1 eip 3000 [ 31.428453] Initializing CPU#1 [ 31.506737] Calibrating delay using timer specific routine.. 6002.22 BogoMIPS (lpj=12004451) [ 31.506745] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000 [ 31.506751] monitor/mwait feature present. [ 31.506757] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 31.506759] CPU: L2 cache: 1024K [ 31.506761] CPU: Physical Processor ID: 0 [ 31.506762] CPU: Processor Core ID: 1 [ 31.506764] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000649d 00000000 00000000 [ 31.507069] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04 [ 31.507472] Total of 2 processors activated (12033.36 BogoMIPS). [ 31.507660] ENABLING IO-APIC IRQs [ 31.507866] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 31.654681] checking TSC synchronization across 2 CPUs: passed. [ 0.003961] Brought up 2 CPUs [ 0.082183] migration_cost=816 [ 0.082547] Booting paravirtualized kernel on bare hardware [ 0.082665] Time: 23:01:38 Date: 11/10/107 [ 0.082734] NET: Registered protocol family 16 [ 0.082857] EISA bus registered [ 0.082899] ACPI: bus type pci registered [ 0.107759] PCI: PCI BIOS revision 3.00 entry at 0xf1f40, last bus=2 [ 0.107801] PCI: Using configuration type 1 [ 0.107841] Setting up standard PCI resources [ 0.115542] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.115584] mtrr: probably your BIOS does not setup all CPUs. [ 0.115625] mtrr: corrected configuration. [ 0.126695] ACPI: Interpreter enabled [ 0.126737] ACPI: Using IOAPIC for interrupt routing [ 0.127443] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.127489] PCI: Probing PCI hardware (bus 00) [ 0.128223] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.128268] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.128559] Boot video device is 0000:01:00.0 [ 0.128835] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 0.128963] PCI: Transparent bridge - 0000:00:1e.0 [ 0.129043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.143140] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.146312] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.146977] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.147707] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.148563] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15) [ 0.149246] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.149923] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.150665] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.151406] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.152288] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.152338] pnp: PnP ACPI init [ 0.155458] pnp: PnP ACPI: found 13 devices [ 0.155502] PnPBIOS: Disabled by ACPI PNP [ 0.155590] PCI: Using ACPI for IRQ routing [ 0.155631] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.174014] NET: Registered protocol family 8 [ 0.174055] NET: Registered protocol family 20 [ 0.174577] pnp: 00:09: ioport range 0x400-0x4bf could not be reserved [ 0.175052] PCI: Bridge: 0000:00:01.0 [ 0.175093] IO window: d000-dfff [ 0.175135] MEM window: fdd00000-fddfffff [ 0.175176] PREFETCH window: d8000000-dfffffff [ 0.175219] PCI: Bridge: 0000:00:1e.0 [ 0.175259] IO window: e000-efff [ 0.175301] MEM window: fde00000-fdefffff [ 0.175343] PREFETCH window: e4000000-ebffffff [ 0.175398] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.175480] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.175492] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.175525] NET: Registered protocol family 2 [ 0.216575] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.216758] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.217380] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.217718] TCP: Hash tables configured (established 131072 bind 65536) [ 0.217761] TCP reno registered [ 0.228671] checking if image is initramfs... it is [ 0.866613] Freeing initrd memory: 8012k freed [ 0.867293] audit: initializing netlink socket (disabled) [ 0.867346] audit(1197327699.632:1): initialized [ 0.867541] highmem bounce pool size: 64 pages [ 0.867682] VFS: Disk quotas dquot_6.5.1 [ 0.868434] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.868536] io scheduler noop registered [ 0.868606] io scheduler anticipatory registered [ 0.868675] io scheduler deadline registered [ 0.868772] io scheduler cfq registered (default) [ 8.862827] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 [ 8.863032] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 8.863075] assign_interrupt_mode Found MSI capability [ 8.863118] Allocate Port Service[0000:00:01.0:pcie00] [ 8.863278] isapnp: Scanning for PnP cards... [ 9.214765] isapnp: No Plug & Play device found [ 9.240721] Real Time Clock Driver v1.12ac [ 9.240817] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 9.241533] mice: PS/2 mouse device common for all mice [ 9.242202] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 9.242484] input: Macintosh mouse button emulation as /class/input/input0 [ 9.242562] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 9.242640] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 9.242894] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 9.245461] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 9.245506] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 9.245670] EISA: Probing bus 0 at eisa.0 [ 9.245739] EISA: Detected 0 cards. [ 9.275848] TCP cubic registered [ 9.275905] NET: Registered protocol family 1 [ 9.275975] Starting balanced_irq [ 9.276019] Using IPI No-Shortcut mode [ 9.276145] ACPI: (supports S0 S1 S3 S4 S5) [ 9.276404] Magic number: 3:191:49 [ 9.276725] Freeing unused kernel memory: 328k freed [ 9.278024] Time: tsc clocksource has been installed. [ 9.290421] input: AT Translated Set 2 keyboard as /class/input/input1 [ 9.463001] Capability LSM initialized [ 9.479751] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] [ 9.509278] ACPI: Fan [FAN] (on) [ 9.513956] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] [ 9.514117] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 9.514230] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 9.535783] ACPI: Thermal Zone [THRM] (40 C) [ 9.954476] SCSI subsystem initialized [ 9.959836] libata version 2.20 loaded. [ 9.984463] ata_piix 0000:00:1f.1: version 2.10ac1 [ 9.984484] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17 [ 9.984581] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 9.984632] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fb00 irq 14 [ 9.984712] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fb08 irq 15 [ 9.984778] scsi0 : ata_piix [ 10.032227] usbcore: registered new interface driver usbfs [ 10.032301] usbcore: registered new interface driver hub [ 10.032379] usbcore: registered new device driver usb [ 10.033342] USB Universal Host Controller Interface driver v3.0 [ 10.035269] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI [ 10.035316] e100: Copyright(c) 1999-2006 Intel Corporation [ 10.468453] ata1.00: ATAPI, max UDMA/33 [ 10.468499] ata1.01: ATAPI, max UDMA/100 [ 10.468544] ata1.01: limited to UDMA/33 due to 40-wire cable [ 10.632416] ata1.00: configured for UDMA/33 [ 10.800115] ata1.01: configured for UDMA/33 [ 10.800164] scsi1 : ata_piix [ 10.800395] ata2: port disabled. ignoring. [ 10.802328] scsi 0:0:0:0: CD-ROM HP DVD Writer 640c ES04 PQ: 0 ANSI: 5 [ 10.803201] scsi 0:0:1:0: CD-ROM IDE-DVD DROM6216 HD07 PQ: 0 ANSI: 5 [ 10.804047] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 10.804259] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 10.804352] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 10.804399] ata3: SATA max UDMA/133 cmd 0x0001fa00 ctl 0x0001f902 bmdma 0x0001f600 irq 18 [ 10.804484] ata4: SATA max UDMA/133 cmd 0x0001f800 ctl 0x0001f702 bmdma 0x0001f608 irq 18 [ 10.804544] scsi2 : ata_piix [ 10.968485] ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 [ 10.968539] ata3.00: ATA-6: WDC WD2500JD-22HBC0, 08.02D08, max UDMA/133 [ 10.968587] ata3.00: 488397168 sectors, multi 16: LBA48 [ 10.981342] ata3.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 [ 10.981393] ata3.00: configured for UDMA/133 [ 10.981444] scsi3 : ata_piix [ 11.149027] ATA: abnormal status 0x7F on port 0x0001f807 [ 11.149253] scsi 2:0:0:0: Direct-Access ATA WDC WD2500JD-22H 08.0 PQ: 0 ANSI: 5 [ 11.150196] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 11.169152] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 11.169246] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 11.169250] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 11.169434] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 11.169511] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000ff00 [ 11.169670] usb usb1: configuration #1 chosen from 1 choice [ 11.169740] hub 1-0:1.0: USB hub found [ 11.169786] hub 1-0:1.0: 2 ports detected [ 11.169929] e100: eth0: e100_probe: addr 0xfdeff000, irq 19, MAC addr 00:13:D4:10:A9:16 [ 11.182598] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 11.182648] Uniform CD-ROM driver Revision: 3.20 [ 11.182743] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 11.188133] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray [ 11.188211] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 11.188500] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 11.188566] sda: Write Protect is off [ 11.188610] sda: Mode Sense: 00 3a 00 00 [ 11.188630] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.188736] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 11.188790] sda: Write Protect is off [ 11.188845] sda: Mode Sense: 00 3a 00 00 [ 11.188864] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.188921] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 11.192190] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 11.192252] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 11.222143] sda1 sda2 < sda5 > [ 11.259603] sd 2:0:0:0: Attached scsi disk sda [ 11.275233] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 11.275345] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 11.275349] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 11.275419] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 11.275499] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fe00 [ 11.275640] usb usb2: configuration #1 chosen from 1 choice [ 11.275710] hub 2-0:1.0: USB hub found [ 11.275756] hub 2-0:1.0: 2 ports detected [ 11.379190] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 [ 11.379293] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 11.379298] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 11.379367] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 11.379448] uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000fd00 [ 11.379586] usb usb3: configuration #1 chosen from 1 choice [ 11.379655] hub 3-0:1.0: USB hub found [ 11.379701] hub 3-0:1.0: 2 ports detected [ 11.483197] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 11.483305] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 11.483310] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 11.483377] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 11.483458] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00 [ 11.483600] usb usb4: configuration #1 chosen from 1 choice [ 11.483668] hub 4-0:1.0: USB hub found [ 11.483714] hub 4-0:1.0: 2 ports detected [ 11.494454] Attempting manual resume [ 11.494495] swsusp: Resume From Partition 8:5 [ 11.494497] PM: Checking swsusp image. [ 11.494662] PM: Resume from disk failed. [ 11.515293] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 11.548083] kjournald starting. Commit interval 5 seconds [ 11.548142] EXT3-fs: mounted filesystem with ordered data mode. [ 11.587624] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 11.587716] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 11.587721] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 11.587788] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 11.587866] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 11.587873] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfdfff000 [ 11.591804] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 11.591925] usb usb5: configuration #1 chosen from 1 choice [ 11.591996] hub 5-0:1.0: USB hub found [ 11.592040] hub 5-0:1.0: 8 ports detected [ 12.045668] usb 1-2: device not accepting address 2, error -71 [ 12.837549] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 13.020449] usb 1-2: configuration #1 chosen from 1 choice [ 13.261688] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 13.439257] usb 3-1: configuration #1 chosen from 1 choice [ 19.693281] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [ 20.629810] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.079435] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.215670] iTCO_vendor_support: vendor-support=0 [ 21.246144] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 21.246282] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 21.246372] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 21.379660] Linux agpgart interface v0.102 (c) Dave Jones [ 21.589061] Linux video capture interface: v2.00 [ 21.815982] NET: Registered protocol family 10 [ 21.816119] lo: Disabled Privacy Extensions [ 21.971747] intel_rng: FWH not detected [ 22.189769] parport: PnPBIOS parport detected. [ 22.189934] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 22.280781] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 [ 22.875356] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(SPCA508?) [ 22.939435] usbcore: registered new interface driver gspca [ 22.939487] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered [ 22.941284] input: PC Speaker as /class/input/input3 [ 23.085405] ivtv: ==================== START INIT IVTV ==================== [ 23.085462] ivtv: version 0.10.1 (tagged release) loading [ 23.085509] ivtv: Linux version: 2.6.20-16-generic SMP mod_unload 586 [ 23.085553] ivtv: In case of problems please include the debug info between [ 23.085602] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 23.085648] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 23.085768] ivtv0: Autodetected Hauppauge card (cx23415 based) [ 23.086064] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.086161] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 23.111858] agpgart: Detected an Intel 945G Chipset. [ 23.129376] agpgart: AGP aperture is 256M @ 0x0 [ 23.327451] usbcore: registered new interface driver libusual [ 23.361522] Initializing USB Mass Storage driver... [ 23.363024] scsi4 : SCSI emulation for USB Mass Storage devices [ 23.363160] usbcore: registered new interface driver usb-storage [ 23.363204] USB Mass Storage support registered. [ 23.363351] usb-storage: device found at 2 [ 23.363353] usb-storage: waiting for device to settle before scanning [ 23.836327] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 23.892621] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [ 24.113491] ivtv0: Encoder revision: 0x02050032 [ 24.113533] ivtv0: Recommended firmware version is 0x02060039. [ 24.121510] ivtv0: Decoder revision: 0x02020023 [ 24.186722] tveeprom 0-0050: Hauppauge model 48132, rev K168, serial# 2947536 [ 24.186771] tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) [ 24.186820] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) [ 24.186863] tveeprom 0-0050: audio processor is MSP4448 (idx 27) [ 24.186905] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) [ 24.186947] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter [ 24.186996] ivtv0: Autodetected Hauppauge WinTV PVR-350 [ 24.237842] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 24.237918] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 24.242319] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 24.311395] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) [ 24.545477] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) [ 24.569182] msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) [ 24.569230] msp3400 0-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect [ 24.569610] ivtv0: Registered device video1 for encoder MPEG (4 MB) [ 24.569854] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 24.570132] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 24.570273] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 24.570565] ivtv0: Registered device radio0 for encoder radio [ 24.570638] ivtv0: Registered device video16 for decoder MPEG (1 MB) [ 24.570739] ivtv0: Registered device vbi8 for decoder VBI (1 MB) [ 24.571203] ivtv0: Registered device vbi16 for decoder VOUT [ 24.571280] ivtv0: Registered device video48 for decoder YUV (1 MB) [ 24.673768] ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) [ 24.781505] tuner 0-0061: type set to 47 (LG NTSC (TAPE series)) [ 25.150666] ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 [ 25.150786] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 25.150899] ivtv: ====================== NEXT CARD ====================== [ 25.150916] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 25.150959] ivtv1: Autodetected Hauppauge card (cx23416 based) [ 25.151141] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 17 (level, low) -> IRQ 21 [ 25.151238] ivtv1: Unreasonably low latency timer, setting to 64 (was 32) [ 25.356521] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 25.786640] ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 26.002587] ivtv1: Encoder revision: 0x02050032 [ 26.002629] ivtv1: Recommended firmware version is 0x02060039. [ 26.009086] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1) [ 26.009152] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 26.013549] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) [ 26.049593] i2c_adapter i2c-1: Client creation failed at 0x44 (-1) [ 26.113923] tveeprom 1-0050: Hauppauge model 26552, rev B268, serial# 7970418 [ 26.113967] tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) [ 26.114016] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) [ 26.114058] tveeprom 1-0050: audio processor is CX25843 (idx 37) [ 26.114100] tveeprom 1-0050: decoder processor is CX25843 (idx 30) [ 26.114142] tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter [ 26.114191] ivtv1: Autodetected Hauppauge WinTV PVR-150 [ 26.198008] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) [ 28.360107] usb-storage: device scan complete [ 28.363107] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 28.366105] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 28.369102] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 28.372100] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 28.377132] sd 4:0:0:0: Attached scsi removable disk sdb [ 28.377230] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 28.382125] sd 4:0:0:1: Attached scsi removable disk sdc [ 28.382211] sd 4:0:0:1: Attached scsi generic sg4 type 0 [ 28.387122] sd 4:0:0:2: Attached scsi removable disk sdd [ 28.387218] sd 4:0:0:2: Attached scsi generic sg5 type 0 [ 28.392118] sd 4:0:0:3: Attached scsi removable disk sde [ 28.392211] sd 4:0:0:3: Attached scsi generic sg6 type 0 [ 31.058643] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 31.200214] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) [ 31.265327] ivtv1: Registered device video2 for encoder MPEG (4 MB) [ 31.265559] ivtv1: Registered device video33 for encoder YUV (2 MB) [ 31.265828] ivtv1: Registered device vbi1 for encoder VBI (1 MB) [ 31.265962] ivtv1: Registered device video25 for encoder PCM audio (1 MB) [ 31.266255] ivtv1: Registered device radio1 for encoder radio [ 31.266314] tuner 1-0061: type set to 47 (LG NTSC (TAPE series)) [ 31.665849] ivtv1: Initialized Hauppauge WinTV PVR-150, card #1 [ 31.666003] ivtv: ==================== END INIT IVTV ==================== [ 32.179244] eth0: no IPv6 routers present [ 32.261816] lp0: using parport0 (interrupt-driven). [ 32.356846] ieee1394: Initialized config rom entry `ip1394' [ 32.472338] fuse init (API version 7.8) [ 32.528925] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k [ 32.865402] EXT3 FS on sda1, internal journal [ 36.569343] input: Power Button (FF) as /class/input/input4 [ 36.569580] ACPI: Power Button (FF) [PWRF] [ 36.570693] input: Power Button (CM) as /class/input/input5 [ 36.570906] ACPI: Power Button (CM) [PWRB] [ 36.588849] Using specific hotkey driver [ 36.638499] No dock devices found. [ 36.679746] ibm_acpi: ec object not found [ 36.853872] pcc_acpi: loading... [ 39.569465] ppdev: user-space parallel port driver [ 41.252410] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 41.252415] apm: disabled - APM is not SMP safe. [ 49.041874] Capability LSM initialized [ 49.703790] Bluetooth: Core ver 2.11 [ 49.704207] NET: Registered protocol family 31 [ 49.704212] Bluetooth: HCI device and connection manager initialized [ 49.704219] Bluetooth: HCI socket layer initialized [ 49.820822] Bluetooth: L2CAP ver 2.8 [ 49.820828] Bluetooth: L2CAP socket layer initialized [ 49.971589] Bluetooth: RFCOMM socket layer initialized [ 49.971604] Bluetooth: RFCOMM TTY layer initialized [ 49.971607] Bluetooth: RFCOMM ver 1.8 -- failed to set xfer mode error. https://bugs.launchpad.net/bugs/112132 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs