Public bug reported: Upstream raspberrypi patchset 2021-02-18
Ported from the following raspberrypi branch: rpi-5.11.y from https://github.com/raspberrypi/linux.git configs: Add various missing IPV6 modules overlays: fsm-demo: Ensure all LEDs are turned off gpio-fsm: Fix shutdown timeout handling gpio-fsm: Show state info in /sys/class/gpio-fsm drm/vc4: Change the default DPI format to being 18bpp, not 24. dtoverlays: Add an overlay for the VGA666 when used with vc4-kms-v3d defconfigs: Add DRM_DISPLAY_CONNECTOR and DRM_SIMPLE_BRIDGE for VGA666 dt: Add option for dpi without DE and PCLK (for VGA666) staging: rpivid: Fix crash when CMA alloc fails drm/vc4: Add connector check to trigger mode_change when hdr metadata changes drm/vc4: Add HDR metadata property to the VC5 HDMI connectors drm: fix HDR static metadata type field numbering overlays: Rename gpio-fsm property num-soft-gpios gpio-fsm: Rename 'num-soft-gpios' to avoid warning Revert "ARM: dts: bcm2711: Add the BSC interrupt controller" Partial revert "bcm2711: Disable bsc_intr and aon_intr by default and enable in overlay" Added hflip and vflip controls to ov9281 Fixed picture line bug in all ov9281 modes bcm2835-isp: Allow formats with different colour spaces. Hifiberry DAC+ADC Pro fix for the PLL when changing sample rates Added PiFi-Mini to rpi-simple-soundcard.c Overlays for PiFi-Mini amp staging:bcm2835-camera: Fix the cherry-pick of AWB Greyworld w1: w1_therm: Fix conversion result for negative temperatures bcm2711: Remove old GIC interrupt bcm2711: Disable bsc_intr and aon_intr by default and enable in overlay ARM: dts: bcm2711: Add the CEC interrupt controller ARM: dts: bcm2711: Add the BSC interrupt controller dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts drm/vc4: hdmi: Don't register the CEC adapter if there's no interrupts drm/vc4: hdmi: Remove cec_available flag drm/vc4: hdmi: Support BCM2711 CEC interrupt setup drm/vc4: hdmi: Split the interrupt handlers drm/vc4: hdmi: Introduce a CEC clock drm/vc4: hdmi: Update the CEC clock divider on HSM rate change drm/vc4: hdmi: Compute the CEC clock divider from the clock rate drm/vc4: hdmi: Restore cec physical address on reconnect drm/vc4: hdmi: Fix up CEC registers drm/vc4: hdmi: Fix register offset with longer CEC messages drm/vc4: hdmi: Move hdmi reset to bind ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 Revert "vc4_hdmi: Fix up CEC registers" Revert "vc4_hdmi: BCM2835 requires a fixed hsm clock for CEC to work" Revert "vc4_hdmi: Fix register offset when sending longer CEC messages" Revert "vc4_hdmi_regs: Add Intr2 register block" Revert "vc4_hdmi_regs: Make interrupt mask variant specific" Revert "vc4_hdmi: Make irq shared" Revert "vc4_hdmi: Adjust CEC ref clock based on its input clock" Revert "vc4_hdmi: Remove cec_available flag as always supported" Revert "vc4: cec: Restore cec physical address on reconnect" Revert "drm/vc4: Reading the hotplug register is only valid if no GPIO defined" Revert "vc4_hdmi: Move hdmi reset to bind" Revert "drm/vc4: hdmi: Limit the BCM2711 to the max without scrambling" configs: Add MICREL_PHY=y i2c: bcm2835: Handle untimely DONE signal media: i2c: imx290: Fix number of controls in v4l2_ctrl_handler_init media: i2c: imx290: Replace V4L2_CID_GAIN with V4L2_CID_ANALOGUE_GAIN configs: Enable CONFIG_MEDIA_CEC_RC ARM: dts: Declare Pi400 and CM4 have no audio pins Enhances the Hifiberry DAC+ driver for Hifiberry AMP100 support Adds the DT-overlays to support Hifiberry AMP100 kbuild: Silence unavoidable dtc overlay warnings spi: bcm2835: Workaround/fix for zero-length transfers ** Affects: linux-raspi (Ubuntu) Importance: Undecided Status: Confirmed ** Affects: linux-raspi (Ubuntu Hirsute) Importance: Undecided Status: Confirmed ** Changed in: linux-raspi (Ubuntu) Status: New => Confirmed ** Also affects: linux-raspi (Ubuntu Hirsute) Importance: Undecided Status: Confirmed ** Description changed: - Upstream raspberrypi patchset 2021-02-18 - Ported from the following raspberrypi branch: - rpi-5.11.y + Ported from the following raspberrypi branch: + rpi-5.11.y from https://github.com/raspberrypi/linux.git + + configs: Add various missing IPV6 modules + overlays: fsm-demo: Ensure all LEDs are turned off + gpio-fsm: Fix shutdown timeout handling + gpio-fsm: Show state info in /sys/class/gpio-fsm + drm/vc4: Change the default DPI format to being 18bpp, not 24. + dtoverlays: Add an overlay for the VGA666 when used with vc4-kms-v3d + defconfigs: Add DRM_DISPLAY_CONNECTOR and DRM_SIMPLE_BRIDGE for VGA666 + dt: Add option for dpi without DE and PCLK (for VGA666) + staging: rpivid: Fix crash when CMA alloc fails + drm/vc4: Add connector check to trigger mode_change when hdr metadata changes + drm/vc4: Add HDR metadata property to the VC5 HDMI connectors + drm: fix HDR static metadata type field numbering + overlays: Rename gpio-fsm property num-soft-gpios + gpio-fsm: Rename 'num-soft-gpios' to avoid warning + Revert "ARM: dts: bcm2711: Add the BSC interrupt controller" + Partial revert "bcm2711: Disable bsc_intr and aon_intr by default and enable in overlay" + Added hflip and vflip controls to ov9281 + Fixed picture line bug in all ov9281 modes + bcm2835-isp: Allow formats with different colour spaces. + Hifiberry DAC+ADC Pro fix for the PLL when changing sample rates + Added PiFi-Mini to rpi-simple-soundcard.c + Overlays for PiFi-Mini amp + staging:bcm2835-camera: Fix the cherry-pick of AWB Greyworld + w1: w1_therm: Fix conversion result for negative temperatures + bcm2711: Remove old GIC interrupt + bcm2711: Disable bsc_intr and aon_intr by default and enable in overlay + ARM: dts: bcm2711: Add the CEC interrupt controller + ARM: dts: bcm2711: Add the BSC interrupt controller + dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts + drm/vc4: hdmi: Don't register the CEC adapter if there's no interrupts + drm/vc4: hdmi: Remove cec_available flag + drm/vc4: hdmi: Support BCM2711 CEC interrupt setup + drm/vc4: hdmi: Split the interrupt handlers + drm/vc4: hdmi: Introduce a CEC clock + drm/vc4: hdmi: Update the CEC clock divider on HSM rate change + drm/vc4: hdmi: Compute the CEC clock divider from the clock rate + drm/vc4: hdmi: Restore cec physical address on reconnect + drm/vc4: hdmi: Fix up CEC registers + drm/vc4: hdmi: Fix register offset with longer CEC messages + drm/vc4: hdmi: Move hdmi reset to bind + ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 + Revert "vc4_hdmi: Fix up CEC registers" + Revert "vc4_hdmi: BCM2835 requires a fixed hsm clock for CEC to work" + Revert "vc4_hdmi: Fix register offset when sending longer CEC messages" + Revert "vc4_hdmi_regs: Add Intr2 register block" + Revert "vc4_hdmi_regs: Make interrupt mask variant specific" + Revert "vc4_hdmi: Make irq shared" + Revert "vc4_hdmi: Adjust CEC ref clock based on its input clock" + Revert "vc4_hdmi: Remove cec_available flag as always supported" + Revert "vc4: cec: Restore cec physical address on reconnect" + Revert "drm/vc4: Reading the hotplug register is only valid if no GPIO defined" + Revert "vc4_hdmi: Move hdmi reset to bind" + Revert "drm/vc4: hdmi: Limit the BCM2711 to the max without scrambling" + configs: Add MICREL_PHY=y + i2c: bcm2835: Handle untimely DONE signal + media: i2c: imx290: Fix number of controls in v4l2_ctrl_handler_init + media: i2c: imx290: Replace V4L2_CID_GAIN with V4L2_CID_ANALOGUE_GAIN + configs: Enable CONFIG_MEDIA_CEC_RC + ARM: dts: Declare Pi400 and CM4 have no audio pins + Enhances the Hifiberry DAC+ driver for Hifiberry AMP100 support + Adds the DT-overlays to support Hifiberry AMP100 + kbuild: Silence unavoidable dtc overlay warnings + spi: bcm2835: Workaround/fix for zero-length transfers -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1916721 Title: hirsute/linux-raspi: Upstream raspberrypi patchset 2021-02-18 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1916721/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
