Public bug reported:
Binary package hint: linux-image-2.6.22-14-generic
I just upgraded from kernel 2.6.20-16 to 2.6.22-14 (using Synaptic). After the
upgrade my three USB ports no longer function, and my built-in webcam (which is
recognized as a USB 2.0 device) no longer works. When I insert a USB mouse,
keyboard, thumb drive, etc... into a port nothing happens.
Before upgrading all USB ports and the webcam were in perfect working condition.
The really strange thing is that immediately after rebooting the USB
ports function normally (as does the webcam if uvcvideo is not
blacklisted). However, after several minutes they will cease working.
If they have devices in them already those devices will continue to
function until removed. Once removed the port goes dead. I have no
idea what would cause that kind of behaviour, but it's got me quite
confused.
Immediately after inserting a USB mouse (or flash drive):
$dmesg | grep usb
[ 17.864746] usbcore: registered new interface driver usbfs
[ 17.864776] usbcore: registered new interface driver hub
[ 17.864803] usbcore: registered new device driver usb
[ 17.866838] usb usb1: configuration #1 chosen from 1 choice
[ 18.220395] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 18.361327] usb 1-4: configuration #1 chosen from 1 choice
[ 18.786242] sda: sda1 sda2 <<6>usb usb2: configuration #1 chosen from 1
choice
[ 35.978926] usbcore: registered new interface driver libusual
[ 36.013558] usbcore: registered new interface driver usb-storage
[ 36.589378] usbcore: registered new interface driver ndiswrapper
[ 173.143384] [<ffffffff88038d30>] (usb_hcd_irq+0x0/0x60 [usbcore])
Repeatedly inserting and removing devices generates absolutely no
messages.
Some other system information:
$uname -r
2.6.22-14-generic
The machine is an HP Pavillion DV6000-series laptop, with a dual-core
AMD64 processor. I am running Ubuntu 7.10 x86_64
Attempted so far:
I read in another bug report from several months ago that the uvcvideo module
caused similar problems. I tried blacklisting it, but the problem with the
three external USB ports remains. (Obviously blacklisting uvcvideo breaks with
webcam.)
In case there's some relevant information here's the complete output of dmesg:
$dmesg
[ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18
05:28:27 UTC 2007 (Ubuntu 2.6.22-14.47-generic)
[ 0.000000] Command line: root=UUID=9000f988-aafa-4286-a26a-e9f8381ffc9f ro
quiet nosplash noapic
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037f00000 (usable)
[ 0.000000] BIOS-e820: 0000000037f00000 - 0000000037f17000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037f17000 - 0000000037f80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037f80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 229120) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8930 checksum 0
[ 0.000000] ACPI: RSDP 000F8930, 0014 (r0 HP )
[ 0.000000] ACPI: RSDT 37F0DD1B, 0040 (r1 HPQOEM SLIC-MPC 6040000 LTP
0)
[ 0.000000] ACPI: FACP 37F16B9A, 0074 (r1 HP MCP51M 6040000 PTL_
F4240)
[ 0.000000] ACPI: DSDT 37F0DD5B, 8E3F (r1 HP MCP51M 6040000 MSFT
3000000)
[ 0.000000] ACPI: FACS 37F17FC0, 0040
[ 0.000000] ACPI: SSDT 37F16C0E, 0182 (r1 HP POWERNOW 6040000 LTP
1)
[ 0.000000] ACPI: MCFG 37F16D90, 003C (r1 HP MCFG 6040000 LTP
0)
[ 0.000000] ACPI: HPET 37F16DCC, 0038 (r1 PTLTD HPETTBL 6040000 LTP
1)
[ 0.000000] ACPI: APIC 37F16E04, 005E (r1 HP APIC 6040000 LTP
0)
[ 0.000000] ACPI: BOOT 37F16E62, 0028 (r1 HP $SBFTBL$ 6040000 LTP
1)
[ 0.000000] ACPI: SLIC 37F16E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP
1)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000037f00000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 229120) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000037f00000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 229120
[ 0.000000] On node 0 totalpages: 229021
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1125 pages reserved
[ 0.000000] DMA zone: 2816 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3076 pages used for memmap
[ 0.000000] DMA32 zone: 221948 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: nVIDIA MPTABLE: Product ID: C51-MCP51
MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 at 0xFEC00000.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Processors: 2
[ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 -
000000000009e000
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000d2000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 224764
[ 0.000000] Kernel command line:
root=UUID=9000f988-aafa-4286-a26a-e9f8381ffc9f ro quiet nosplash noapic
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 14.146701] time.c: Detected 1607.316 MHz processor.
[ 14.149988] Console: colour VGA+ 80x25
[ 14.150007] Checking aperture...
[ 14.150011] CPU 0: aperture @ 84ba000000 size 32 MB
[ 14.150014] Aperture too small (32 MB)
[ 14.157126] No AGP bridge found
[ 14.168227] Memory: 891624k/916480k available (2274k kernel code, 24460k
reserved, 1181k data, 296k init)
[ 14.168281] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2,
Nodes=1
[ 14.244467] Calibrating delay using timer specific routine.. 3217.52
BogoMIPS (lpj=6435040)
[ 14.244501] Security Framework v1.0.0 initialized
[ 14.244509] SELinux: Disabled at boot.
[ 14.244610] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 14.245221] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 14.245598] Mount-cache hash table entries: 256
[ 14.245741] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 14.245744] CPU: L2 Cache: 256K (64 bytes/line)
[ 14.245748] CPU 0/0 -> Node 0
[ 14.245750] CPU: Physical Processor ID: 0
[ 14.245752] CPU: Processor Core ID: 0
[ 14.245769] SMP alternatives: switching to UP code
[ 14.246013] Early unpacking initramfs... done
[ 14.612065] ACPI: Core revision 20070126
[ 14.612149] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 14.614972] ACPI: setting ELCR to 0200 (from 0ca0)
[ 14.823034] Using local APIC timer interrupts.
[ 14.885244] result 12557155
[ 14.885246] Detected 12.557 MHz APIC timer.
[ 14.888456] SMP alternatives: switching to SMP code
[ 14.888572] Booting processor 1/2 APIC 0x1
[ 14.899057] Initializing CPU#1
[ 14.900808] spurious 8259A interrupt: IRQ7.
[ 14.976802] Calibrating delay using timer specific routine.. 3220.72
BogoMIPS (lpj=6441447)
[ 14.976810] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 14.976812] CPU: L2 Cache: 256K (64 bytes/line)
[ 14.976815] CPU 1/1 -> Node 0
[ 14.976817] CPU: Physical Processor ID: 0
[ 14.976819] CPU: Processor Core ID: 1
[ 14.976886] AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
[ 14.980393] Brought up 2 CPUs
[ 15.875323] migration_cost=122
[ 15.875107] NET: Registered protocol family 16
[ 15.875200] ACPI: bus type pci registered
[ 15.875206] PCI: Using configuration type 1
[ 15.876301] ACPI: EC: Look up EC in DSDT
[ 15.876855] ACPI: EC: GPE=0x10, ports=0x66, 0x62
[ 15.878609] ACPI: System BIOS is requesting _OSI(Linux)
[ 15.878612] ACPI: Please test with "acpi_osi=!Linux"
[ 15.878613] Please send dmidecode to [EMAIL PROTECTED]
[ 15.878887] ACPI: Interpreter enabled
[ 15.878891] ACPI: (supports S0 S3 S4 S5)
[ 15.878910] ACPI: Using PIC for interrupt routing
[ 15.888909] ACPI: EC: GPE=0x10, ports=0x66, 0x62
[ 15.889013] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.889021] PCI: Probing PCI hardware (bus 00)
[ 15.890242] PCI: Transparent bridge - 0000:00:10.0
[ 15.890280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.890395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 15.890429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 15.890471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 15.930078] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.930276] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[ 15.930470] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
[ 15.930661] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.930852] ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.931050] ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.931243] ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 9 10 *11 14 15)
[ 15.931434] ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.931627] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 15.931820] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15)
[ 15.932012] ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 9 10 *11 14 15)
[ 15.932205] ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 9 10 11 14 15)
[ 15.932431] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 15.932624] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.932817] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.933010] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.933203] ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 15.933408] ACPI: PCI Interrupt Link [LTID] (IRQs *5 7 9 10 11 14 15)
[ 15.933602] ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 9 *10 11 14 15)
[ 15.933754] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.933768] pnp: PnP ACPI init
[ 15.933786] ACPI: bus type pnp registered
[ 15.937046] pnp: PnP ACPI: found 13 devices
[ 15.937051] ACPI: ACPI bus type pnp unregistered
[ 15.937125] PCI: Using ACPI for IRQ routing
[ 15.937129] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 15.937233] NET: Registered protocol family 8
[ 15.937236] NET: Registered protocol family 20
[ 15.937348] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 15.937354] hpet0: 3 32-bit timers, 25000000 Hz
[ 15.938418] pnp: 00:00: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 15.938426] pnp: 00:01: iomem range 0xffc00000-0xffffffff could not be
reserved
[ 15.938431] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 15.938435] pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not be
reserved
[ 15.938439] pnp: 00:01: iomem range 0xfed00000-0xfed00fff has been reserved
[ 15.938448] pnp: 00:03: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 15.938455] pnp: 00:04: ioport range 0x1000-0x107f has been reserved
[ 15.938459] pnp: 00:04: ioport range 0x1080-0x10ff has been reserved
[ 15.938463] pnp: 00:04: ioport range 0x1400-0x147f has been reserved
[ 15.938466] pnp: 00:04: ioport range 0x1480-0x14ff has been reserved
[ 15.938470] pnp: 00:04: ioport range 0x1800-0x187f has been reserved
[ 15.938473] pnp: 00:04: ioport range 0x1880-0x18ff has been reserved
[ 15.938477] pnp: 00:04: ioport range 0x2000-0x203f has been reserved
[ 15.938829] PCI: Bridge: 0000:00:02.0
[ 15.938832] IO window: 4000-4fff
[ 15.938836] MEM window: b4000000-b7ffffff
[ 15.938840] PREFETCH window: d0000000-d01fffff
[ 15.938843] PCI: Bridge: 0000:00:03.0
[ 15.938845] IO window: disabled.
[ 15.938849] MEM window: b8000000-bbffffff
[ 15.938851] PREFETCH window: disabled.
[ 15.938855] PCI: Bridge: 0000:00:10.0
[ 15.938857] IO window: disabled.
[ 15.938861] MEM window: bc000000-bc0fffff
[ 15.938864] PREFETCH window: disabled.
[ 15.938876] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 15.938884] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 15.938893] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 15.938956] NET: Registered protocol family 2
[ 15.940248] Time: hpet clocksource has been installed.
[ 15.972308] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 15.972745] TCP established hash table entries: 131072 (order: 9, 3145728
bytes)
[ 15.975180] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 15.975951] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.975955] TCP reno registered
[ 15.984388] checking if image is initramfs... it is
[ 16.701982] Freeing initrd memory: 7267k freed
[ 16.706867] Simple Boot Flag at 0x36 set to 0x1
[ 16.708023] audit: initializing netlink socket (disabled)
[ 16.708040] audit(1198221994.292:1): initialized
[ 16.713137] VFS: Disk quotas dquot_6.5.1
[ 16.713262] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 16.713442] io scheduler noop registered
[ 16.713445] io scheduler anticipatory registered
[ 16.713447] io scheduler deadline registered
[ 16.713680] io scheduler cfq registered (default)
[ 16.713703] Boot video device is 0000:00:05.0
[ 16.928967] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 16.928992] assign_interrupt_mode Found MSI capability
[ 16.928996] Allocate Port Service[0000:00:02.0:pcie00]
[ 16.929076] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 16.929099] assign_interrupt_mode Found MSI capability
[ 16.929102] Allocate Port Service[0000:00:03.0:pcie00]
[ 16.969540] Real Time Clock Driver v1.12ac
[ 16.969735] hpet_resources: 0xfed00000 is busy
[ 16.969782] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.969785] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 16.971306] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 16.971487] input: Macintosh mouse button emulation as /class/input/input0
[ 16.971583] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64
irq 1,12
[ 16.988302] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.988310] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 16.988525] mice: PS/2 mouse device common for all mice
[ 16.988669] TCP cubic registered
[ 16.989383] NET: Registered protocol family 1
[ 16.989727] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c:
unable to open rtc device (rtc0)
[ 16.989736] Freeing unused kernel memory: 296k freed
[ 17.008155] input: AT Translated Set 2 keyboard as /class/input/input1
[ 17.194999] AppArmor: AppArmor initialized<5>audit(1198221994.780:2):
type=1505 info="AppArmor initialized" pid=1255
[ 17.203702] fuse init (API version 7.8)
[ 17.210622] Failure registering capabilities with primary security module.
[ 17.247226] ACPI: Thermal Zone [THRM] (59 C)
[ 17.864746] usbcore: registered new interface driver usbfs
[ 17.864776] usbcore: registered new interface driver hub
[ 17.864803] usbcore: registered new device driver usb
[ 17.866325] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 7
[ 17.866330] PCI: setting IRQ 7 as level-triggered
[ 17.866335] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 7
(level, low) -> IRQ 7
[ 17.866439] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 17.866447] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 17.866604] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus
number 1
[ 17.866649] ehci_hcd 0000:00:0b.1: debug port 1
[ 17.866654] PCI: cache line size of 64 is not supported by device
0000:00:0b.1
[ 17.866664] ehci_hcd 0000:00:0b.1: irq 7, io mem 0xb0005000
[ 17.866672] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 17.866838] usb usb1: configuration #1 chosen from 1 choice
[ 17.866876] hub 1-0:1.0: USB hub found
[ 17.866885] hub 1-0:1.0: 8 ports detected
[ 17.883582] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 17.892103] SCSI subsystem initialized
[ 17.898257] libata version 2.21 loaded.
[ 17.938897] forcedeth.c: Reverse Engineered nForce ethernet driver. Version
0.60.
[ 17.974870] sata_nv 0000:00:0e.0: version 3.4
[ 17.974888] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
[ 17.975201] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 5
[ 17.975204] PCI: setting IRQ 5 as level-triggered
[ 17.975209] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 5
(level, low) -> IRQ 5
[ 17.975363] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 17.975686] scsi0 : sata_nv
[ 17.975755] scsi1 : sata_nv
[ 17.975849] ata1: SATA max UDMA/133 cmd 0x00000000000130c0 ctl
0x00000000000130b6 bmdma 0x0000000000013090 irq 5
[ 17.975855] ata2: SATA max UDMA/133 cmd 0x00000000000130b8 ctl
0x00000000000130b2 bmdma 0x0000000000013098 irq 5
[ 18.006643] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 18.006649] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 18.220395] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 18.361327] usb 1-4: configuration #1 chosen from 1 choice
[ 18.439930] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 18.448100] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001H, max UDMA/100
[ 18.448105] ata1.00: 234441648 sectors, multi 16: LBA48
[ 18.456094] ata1.00: configured for UDMA/100
[ 18.767871] ata2: SATA link down (SStatus 0 SControl 300)
[ 18.778639] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00
PQ: 0 ANSI: 5
[ 18.779202] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
[ 18.779207] PCI: setting IRQ 11 as level-triggered
[ 18.779212] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 11
(level, low) -> IRQ 11
[ 18.779321] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 18.779330] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 18.779396] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus
number 2
[ 18.779417] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xb0004000
[ 18.786113] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 18.786128] sd 0:0:0:0: [sda] Write Protect is off
[ 18.786132] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.786148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 18.786211] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 18.786221] sd 0:0:0:0: [sda] Write Protect is off
[ 18.786224] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.786239] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 18.786242] sda: sda1 sda2 <<6>usb usb2: configuration #1 chosen from 1
choice
[ 18.834074] hub 2-0:1.0: USB hub found
[ 18.834085] hub 2-0:1.0: 8 ports detected
[ 18.836666] sda5 >
[ 18.836780] sd 0:0:0:0: [sda] Attached SCSI disk
[ 18.841375] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.940496] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
[ 18.940502] PCI: setting IRQ 10 as level-triggered
[ 18.940507] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 10
(level, low) -> IRQ 10
[ 18.940515] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 18.940524] forcedeth: using HIGHDMA
[ 19.031752] Attempting manual resume
[ 19.031756] swsusp: Resume From Partition 8:5
[ 19.031759] PM: Checking swsusp image.
[ 19.032001] PM: Resume from disk failed.
[ 19.076341] kjournald starting. Commit interval 5 seconds
[ 19.076353] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.460123] eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0
[ 19.460611] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 19.460615] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 11
(level, low) -> IRQ 11
[ 19.468190] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[ 19.468227] NFORCE-MCP51: chipset revision 241
[ 19.468230] NFORCE-MCP51: not 100% native mode: will probe irqs later
[ 19.468234] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling
workaround.
[ 19.468240] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
[ 19.468249] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA,
hdb:pio
[ 19.468259] Probing IDE interface ide0...
[ 19.512862] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]
MMIO=[bc000000-bc0007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 20.208241] hda: Optiarc DVD RW AD-7530A, ATAPI CD/DVD-ROM drive
[ 20.791719] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0099b91300]
[ 20.882390] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 31.799905] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.808998] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 31.897706] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 31.897751] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 32.707342] nvidia: module license 'NVIDIA' taints kernel.
[ 32.963641] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 11
[ 32.963647] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 11
(level, low) -> IRQ 11
[ 32.963657] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 32.963871] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9742 Tue
Nov 7 09:45:02 PST 2006
[ 32.964564] sdhci: Secure Digital Host Controller Interface driver
[ 32.964571] sdhci: Copyright(c) Pierre Ossman
[ 32.965391] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev
19)
[ 32.965720] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[ 32.965724] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 11
(level, low) -> IRQ 11
[ 32.966566] mmc0: SDHCI at 0xbc000800 irq 11 DMA
[ 33.161318] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache,
(U)DMA
[ 33.161329] Uniform CD-ROM driver Revision: 3.20
[ 33.448882] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
[ 33.448888] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 10
(level, low) -> IRQ 10
[ 33.449003] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 33.811980] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps:
0xa04713/0x200000
[ 33.873844] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 34.613609] hda_intel: azx_get_response timeout, switching to polling mode...
[ 35.724400] lp: driver loaded but no devices found
[ 35.903898] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology
TL-50 processors (version 2.00.00)
[ 35.903360] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x12
[ 35.903366] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 35.978926] usbcore: registered new interface driver libusual
[ 36.011766] Initializing USB Mass Storage driver...
[ 36.013558] usbcore: registered new interface driver usb-storage
[ 36.013565] USB Mass Storage support registered.
[ 36.074919] ndiswrapper version 1.45 loaded (smp=yes)
[ 36.236935] ndiswrapper (link_pe_images:577): fixing KI_USER_SHARED_DATA
address in the driver
[ 36.239055] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5)
loaded
[ 36.239611] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 9
[ 36.239615] PCI: setting IRQ 9 as level-triggered
[ 36.239619] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 9
(level, low) -> IRQ 9
[ 36.239663] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 36.242902] ndiswrapper: using IRQ 9
[ 36.579017] wlan0: ethernet device 00:1a:73:47:4d:de using NDIS driver:
bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network
Adapter', 14E4:4311.5.conf
[ 36.579061] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2,
WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 36.589378] usbcore: registered new interface driver ndiswrapper
[ 36.638933] Adding 2819368k swap on /dev/sda5. Priority:-1 extents:1
across:2819368k
[ 36.690204] ndiswrapper: changing interface name from 'wlan0' to 'eth1'
[ 36.979503] EXT3 FS on sda1, internal journal
[ 39.268598] NET: Registered protocol family 17
[ 44.208580] ACPI: AC Adapter [ACAD] (on-line)
[ 44.237331] ACPI: Battery Slot [BAT0] (battery present)
[ 45.103326] No dock devices found.
[ 46.124281] input: Power Button (FF) as /class/input/input3
[ 46.124329] ACPI: Power Button (FF) [PWRF]
[ 46.124397] input: Power Button (CM) as /class/input/input4
[ 46.124417] ACPI: Power Button (CM) [PWRB]
[ 46.124478] input: Sleep Button (CM) as /class/input/input5
[ 46.124497] ACPI: Sleep Button (CM) [SLPB]
[ 46.124555] input: Lid Switch as /class/input/input6
[ 46.124571] ACPI: Lid Switch [LID]
[ 46.190278] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 46.193614] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 48.128004] eth0: no link during initialization.
[ 49.432010] NET: Registered protocol family 10
[ 49.432210] lo: Disabled Privacy Extensions
[ 49.432381] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.432401] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 50.620684] ppdev: user-space parallel port driver
[ 52.587630] audit(1198222031.128:3): type=1503 operation="inode_permission"
requested_mask="a" denied_mask="a" name="/dev/tty" pid=5445
profile="/usr/sbin/cupsd"
[ 53.501702] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[ 53.626629] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 53.647127] NFSD: starting 90-second grace period
[ 56.282318] Failure registering capabilities with primary security module.
[ 56.753169] Bluetooth: Core ver 2.11
[ 56.753236] NET: Registered protocol family 31
[ 56.753238] Bluetooth: HCI device and connection manager initialized
[ 56.753242] Bluetooth: HCI socket layer initialized
[ 56.812405] Bluetooth: L2CAP ver 2.8
[ 56.812411] Bluetooth: L2CAP socket layer initialized
[ 56.920968] Bluetooth: RFCOMM socket layer initialized
[ 56.920988] Bluetooth: RFCOMM TTY layer initialized
[ 56.920991] Bluetooth: RFCOMM ver 1.8
[ 95.838272] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 114.790203] eth1: no IPv6 routers present
[ 173.143265] irq 7: nobody cared (try booting with the "irqpoll" option)
[ 173.143274]
[ 173.143275] Call Trace:
[ 173.143278] <IRQ> [<ffffffff8026aade>] __report_bad_irq+0x1e/0x80
[ 173.143308] [<ffffffff8026adc3>] note_interrupt+0x283/0x2c0
[ 173.143319] [<ffffffff8026bbbc>] handle_level_irq+0x10c/0x140
[ 173.143328] [<ffffffff8020c6ab>] do_IRQ+0x7b/0x100
[ 173.143332] [<ffffffff80209010>] default_idle+0x0/0x40
[ 173.143338] [<ffffffff8020a3a1>] ret_from_intr+0x0/0xa
[ 173.143341] <EOI> [<ffffffff804221d0>] unix_poll+0x0/0xb0
[ 173.143355] [<ffffffff80209039>] default_idle+0x29/0x40
[ 173.143361] [<ffffffff802090c0>] cpu_idle+0x70/0xc0
[ 173.143380]
[ 173.143382] handlers:
[ 173.143384] [<ffffffff88038d30>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 173.143407] Disabling IRQ #7
Kernel Modules:
$lsmod
Module Size Used by
binfmt_misc 14860 1
rfcomm 47656 2
l2cap 28672 11 rfcomm
bluetooth 63876 4 rfcomm,l2cap
nfsd 272552 13
exportfs 7808 1 nfsd
lockd 76336 2 nfsd
sunrpc 198536 8 nfsd,lockd
ppdev 11272 0
ipv6 317192 12
video 21140 0
button 10400 0
dock 12264 0
sbs 21520 0
container 6400 0
battery 12424 0
ac 7304 0
af_packet 28172 4
ndiswrapper 233632 0
usb_storage 81728 0
libusual 22824 1 usb_storage
powernow_k8 16608 1
cpufreq_userspace 6048 0
cpufreq_stats 8160 0
cpufreq_powersave 3072 0
cpufreq_ondemand 10896 1
freq_table 6464 3 powernow_k8,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 9608 0
sbp2 27144 0
parport_pc 41896 0
lp 15048 0
parport 44172 3 ppdev,parport_pc,lp
joydev 13440 0
snd_hda_intel 337192 1
snd_pcm_oss 50048 0
snd_mixer_oss 20096 1 snd_pcm_oss
snd_pcm 94344 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 5380 0
snd_seq_oss 36864 0
snd_seq_midi 11008 0
snd_rawmidi 29824 1 snd_seq_midi
ide_cd 35488 0
cdrom 41768 1 ide_cd
snd_seq_midi_event 9984 2 snd_seq_oss,snd_seq_midi
psmouse 45596 0
snd_seq 62496 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 27272 2 snd_pcm,snd_seq
snd_seq_device 10260 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
serio_raw 9092 0
sdhci 21004 0
nvidia 7734392 32
k8temp 7680 0
mmc_core 33416 1 sdhci
snd 69288 11
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 10272 1 snd
snd_page_alloc 12560 2 snd_hda_intel,snd_pcm
i2c_nforce2 7808 0
shpchp 38300 0
pci_hotplug 36612 1 shpchp
i2c_core 30208 2 nvidia,i2c_nforce2
evdev 13056 6
ext3 146576 1
jbd 69360 1 ext3
mbcache 11272 1 ext3
sg 41384 0
sd_mod 32512 3
amd74xx 17328 0 [permanent]
ide_core 141200 3 usb_storage,ide_cd,amd74xx
sata_nv 24068 2
ohci1394 38984 0
ieee1394 109528 2 sbp2,ohci1394
forcedeth 55048 0
ata_generic 9988 0
libata 138928 2 sata_nv,ata_generic
scsi_mod 172856 5 usb_storage,sbp2,sg,sd_mod,libata
ohci_hcd 25092 0
ehci_hcd 40076 0
usbcore 161584 6
ndiswrapper,usb_storage,libusual,ohci_hcd,ehci_hcd
thermal 16528 0
processor 36232 2 powernow_k8,thermal
fan 6920 0
fuse 52528 1
apparmor 47008 0
commoncap 9472 1 apparmor
$ lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 0c45:62c0 Microdia
Bus 001 Device 001: ID 0000:0000
This is an exceptionally frustrating bug, and I'd appreciate any help that
anyone can offer me. If you need further information please feel free to me
know what you need.
** Affects: linux-source-2.6.22 (Ubuntu)
Importance: Undecided
Status: New
--
USB devices not functioning after kernel upgrade
https://bugs.launchpad.net/bugs/177835
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
