I'm having this issue with a vostro 1700 and 2.6.22-14-generic kernel, i've read that it won't get fixed for this kernel, so i wonder what problems would arise in my system if i don´t upgrade to hardy kernel?? would my drive get toasted??.
Also i've found this patch that seems to solve the issue without the need of blacklist each model reported.. http://article.gmane.org/gmane.linux.ide/26012 Issue explanation http://www.mail-archive.com/[EMAIL PROTECTED]/msg240008.html The patch itself. My hdparm -I /dev/sda /dev/sda: ATA device, with non-removable media Model Number: ST9160821AS Serial Number: removed Firmware Revision: 3.CDE Standards: Supported: 7 6 5 4 Likely used: 7 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 312581808 device size with M = 1024*1024: 152627 MBytes device size with M = 1000*1000: 160041 MBytes (160 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 8 Advanced power management level: unknown setting (0x8080) Recommended acoustic management value: 128, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * DOWNLOAD_MICROCODE * Advanced Power Management feature set SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * IDLE_IMMEDIATE with UNLOAD * SATA-I signaling speed (1.5Gb/s) * Native Command Queueing (NCQ) * Phy event counters Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase and the dmesg | grep ata output [ 360.444000] ata3: soft resetting port [ 360.616000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 360.624000] ata3.00: configured for UDMA/133 [ 360.624000] ata3: EH complete [ 1520.244000] ata3.00: exception Emask 0x2 SAct 0x7ffc SErr 0x0 action 0x2 frozen [ 1520.244000] ata3.00: (spurious completions during NCQ issue=0x7fc0 SAct=0x7ffc FIS=004040a1:00000002) [ 1520.244000] ata3.00: cmd 61/08:10:d1:4e:27/00:00:06:00:00/40 tag 2 cdb 0x0 data 4096 out [ 1520.244000] ata3.00: cmd 61/08:18:59:4f:27/00:00:06:00:00/40 tag 3 cdb 0x0 data 4096 out [ 1520.244000] ata3.00: cmd 61/08:20:61:4f:27/00:00:06:00:00/40 tag 4 cdb 0x0 data 4096 out [ 1520.244000] ata3.00: cmd 61/08:28:71:4f:27/00:00:06:00:00/40 tag 5 cdb 0x0 data 4096 out [ 1520.244000] ata3.00: cmd 61/10:30:c1:4f:2f/00:00:06:00:00/40 tag 6 cdb 0x0 data 8192 out [ 1520.244000] ata3.00: cmd 61/08:38:d1:4e:6f/00:00:07:00:00/40 tag 7 cdb 0x0 data 4096 out [ 1520.244000] ata3.00: cmd 61/10:40:f1:4e:6f/00:00:07:00:00/40 tag 8 cdb 0x0 data 8192 out [ 1520.244000] ata3.00: cmd 61/08:48:49:4f:6f/00:00:07:00:00/40 tag 9 cdb 0x0 data 4096 out [ 1520.244000] ata3.00: cmd 61/10:50:19:50:6f/00:00:07:00:00/40 tag 10 cdb 0x0 data 8192 out [ 1520.244000] ata3.00: cmd 61/08:58:71:50:6f/00:00:07:00:00/40 tag 11 cdb 0x0 data 4096 out [ 1520.244000] ata3.00: cmd 61/08:60:91:50:6f/00:00:07:00:00/40 tag 12 cdb 0x0 data 4096 out [ 1520.244000] ata3.00: cmd 61/08:68:61:4f:9f/00:00:07:00:00/40 tag 13 cdb 0x0 data 4096 out [ 1520.244000] ata3.00: cmd 61/08:70:39:52:9f/00:00:07:00:00/40 tag 14 cdb 0x0 data 4096 out [ 1520.556000] ata3: soft resetting port [ 1520.728000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1520.736000] ata3.00: configured for UDMA/133 [ 1520.736000] ata3: EH complete [10950.364000] ata3.00: exception Emask 0x2 SAct 0x7fc SErr 0x0 action 0x2 frozen [10950.364000] ata3.00: (spurious completions during NCQ issue=0x7c0 SAct=0x7fc FIS=004040a1:00000002) [10950.364000] ata3.00: cmd 61/08:10:f9:4e:3b/00:00:04:00:00/40 tag 2 cdb 0x0 data 4096 out [10950.364000] ata3.00: cmd 61/08:18:61:4f:3b/00:00:04:00:00/40 tag 3 cdb 0x0 data 4096 out [10950.364000] ata3.00: cmd 61/10:20:c1:4e:2b/00:00:04:00:00/40 tag 4 cdb 0x0 data 8192 out [10950.364000] ata3.00: cmd 61/10:28:71:4f:3b/00:00:04:00:00/40 tag 5 cdb 0x0 data 8192 out [10950.364000] ata3.00: cmd 61/08:30:c1:90:3d/00:00:04:00:00/40 tag 6 cdb 0x0 data 4096 out [10950.364000] ata3.00: cmd 61/08:38:c9:a6:3d/00:00:04:00:00/40 tag 7 cdb 0x0 data 4096 out [10950.364000] ata3.00: cmd 61/08:40:11:0f:3e/00:00:04:00:00/40 tag 8 cdb 0x0 data 4096 out [10950.364000] ata3.00: cmd 61/08:48:49:4f:6f/00:00:07:00:00/40 tag 9 cdb 0x0 data 4096 out [10950.364000] ata3.00: cmd 61/08:50:91:50:6f/00:00:07:00:00/40 tag 10 cdb 0x0 data 4096 out [10950.676000] ata3: soft resetting port [10950.848000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10950.856000] ata3.00: configured for UDMA/133 [10950.856000] ata3: EH complete [18737.040000] ata2: port disabled. ignoring. [18737.352000] ata5: SATA link down (SStatus 0 SControl 300) [18737.524000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [18737.532000] ata3.00: configured for UDMA/133 [18737.580000] ata1.00: configured for UDMA/33 -- spurious completions during NCQ Hitachi HTS722016K9A300/HTS722012K9A300/HTS541616J9SA00/HTS542525K9SA00 https://bugs.launchpad.net/bugs/137470 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
