Public bug reported:

I put an SD card in my card reader but nothing happened. The card reader
shows up with lsusb, and there exist devices called /dev/sdd and
/dev/sde which belong to the plugdev group. However there is no
/dev/sdd1 etc. Nor is there a subdirectory of /media corresponding to
the card. I'm not sure which kernel module is required for it to work,
but if it is usb-storage, then that one is definitely loaded according
to lsmod.

Gutsy was installed cleanly onto this computer a few weeks ago (i.e. not
an upgrade).

This is what lsusb says:

[EMAIL PROTECTED]:/media$ lsusb -v -D/proc/bus/usb/005/004
Device: ID 07cc:0301 Carry Computer Eng., Co., Ltd 6-in-1 Card Reader
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x07cc Carry Computer Eng., Co., Ltd
  idProduct          0x0301 6-in-1 Card Reader
  bcdDevice            0.05
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              4
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

** Affects: ubuntu
     Importance: Undecided
         Status: New

-- 
gutsy installer fails to configure card reader
https://bugs.launchpad.net/bugs/178396
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to