** Description changed: - Upstream raspberrypi patchset 2022-03-08 - Ported from the following raspberrypi branch: - rpi-5.15.y - from https://github.com/raspberrypi/linux.git + Ported from the following raspberrypi branch: + rpi-5.15.y + from https://github.com/raspberrypi/linux.git + + drm/vc4: txp: Force alpha to be 0xff if it's disabled + drm/vc4: txp: Don't set TXP_VSTART_AT_EOF + drm/vc4: kms: Improve logging + drm/vc4: kms: Warn if we have an incompatible muxing setup + drm/vc4: kms: Store channel in local variable + drm/vc4: hvs: Reset muxes at probe time + staging: vc04_services: codec: Add support for V4L2_PIX_FMT_RGBA32 format + drm/vc4: Fix out of order frames during asynchronous page flips + drivers: staging: bcm2835-isp: Do not cleanup mmal vcsm buffer on stop_streaming + staging: vc04_services: isp: Permit all sRGB colour spaces on ISP outputs + staging/vc-sm-cma: Avoid log spamming on Pi0/1 over cache alias. + defconfigs: Add OV2311 image sensor to Pi defconfigs + dtoverlays: Add overlay for Omnivision OV2311 image sensor + media/i2c: Add driver for Omnivision OV2311 + usb: xhci: expand the scope of XHCI_VLI_SS_BULK_OUT_BUG + usb: xhci: rework XHCI_VLI_SS_BULK_OUT_BUG quirk + configs: Add CONFIG_TINYDRM_HX8357D=m + overlays: Add "drm" parameter to pitft35-resistive + overlays: Overlays for WaveShare 2-Chan CAN FD HAT + overlays:fixes probing of Hifiberry DAC2 HD + ARM: dts: Add GPIO line names for downstream RPis + drm/vc4: hvs: Defer dlist slots deallocation + drm/vc4: hvs: Use pointer to HVS in HVS_READ and HVS_WRITE macros + drm/vc4: hvs: Fix frame count register readout + ARM: boot: dts: bcm2711: Fix HVS register range + Revert "drm/vc4: plane: Use dlist offset instead of pointer" + Revert "drm/vc4: hvs: Create a shadow dlist" + Revert "drm/vc4: Correct interrupt enable bits on hvs4" + Revert "drm/vc4: Fix interrupt masking for HVS5." + dtoverlays: Switch ov7251 to using Media Controller by default + media: i2c: ov7251: Switch from V4L2_CID_GAIN to V4L2_CID_ANALOGUE_GAIN + media: i2c: ov7251: Add V4L2_CID_VBLANK + media: i2c: ov7251: Separate modes from frame intervals + media: i2c: ov7251: Limit exposure based on VTS + media: i2c: ov7251: Set VTS instead of having full tables for FPS. + media: i2c: ov7251: Add get_selection for NATIVE_SIZE, CROP_BOUNDS, CROP_DEFAULT + media: i2c: ov7251: Fix link_freq validation loop + media: i2c: ov7251: Do not reset gain on mode change + media: i2c: ov7251: Add V4L2_CID_HBLANK control + media: i2c: ov7251: Initialise current_mode during probe + media: i2c: ov7251: V4L2_CID_LINK_FREQUENCY is fixed + media: i2c: ov7251: V4L2_CID_PIXEL_RATE is fixed + media: i2c: ov7251: Reinstate setting ov7251_global_init_setting + media: i2c: Remove .s_power() from ov7251 + media: i2c: Add pm_runtime support to ov7251 + media: i2c: Add ov7251_detect_chip() + media: i2c: Add support for 19.2MHz clock to ov7251 + media: i2c: Add ov7251_pll_configure() + media: i2c: Provide ov7251_check_hwcfg() + media: i2c: Add acpi support to ov7251 + dtoverlays: Correct link frequency for ov7251 + usb: xhci: add a quirk for Superspeed bulk OUT transfers on VL805 + drm/vc4: Remove entry to ULPS from vc4_dsi post_disable + drm/vc4: Convert vc4_dsi to using a bridge instead of encoder. + drm/vc4: Convert vc4_dsi to use atomic enable/disable/mode_set. + drm/vc4: Remove splitting the bridge chain from the driver. + drm/vc4: Move DSI initialisation to encoder_mode_set. + drm/vc4: Rename bridge to out_bridge + drm/tc358762: Set the DRM_BRIDGE_OP_UPSTREAM_FIRST flag to configure DSI host + drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors + drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_* + drm: Introduce DRM_BRIDGE_OP_UPSTREAM_FIRST to alter bridge init order + dtoverlays: Add additional mappings to vc4-kms-dpi-generic + drm/vc4: For DPI, MEDIA_BUS_FMT_RGB565_1X16 is mode 1, not 3. + media: i2c: imx219: Scale the pixel clock rate for the 640x480 mode + dtoverlays: add rgb565-padhi output to vc4-kms-dpi-generic + dtoverlays: fix overrides in vc4-kms-dpi-generic + overlays: rpi-poe(-plus): Fix parameters + drm/vc4: hdmi: Make sure the device is powered with CEC
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1964144 Title: jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-03-08) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1964144/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
