This bug was fixed in the package lirc - 0.8.3~pre1-0ubuntu4
---------------
lirc (0.8.3~pre1-0ubuntu4) hardy; urgency=low
* Add 25_upstream_2_6_24 to fix lirc_dev,lirc_serial,lirc_sir
on 2.6.24.
* Add 26_transmitter_lircd.conf for pre-shipped cable/satellite
receiver lircd.conf's as well as a transmitter.hwdb
* Add 27_multiple_include for allowing lircd.conf's via
an 'include' directive.
* Update 16_lirc-gpio, 22_hauppauge_novat_500, 24_freecom_dvbt
for upstream driver name change from dev/input to devinput.
* Drop 17_devinput since it is no longer necessary due to
upstream driver name change.
* Update 12_lirc_pvr150 for 2.6.24.
* Update 20_lirc_serial_igor for 2.6.24.
* Update 13-warning-cleanup for more cleanup on sir
* Update 03_extra_files, 04_manpages, 12_pvr150_transmit_support,
13-warning-cleanup, 16_lirc-gpio, 20_serial-igor, 21_atiusb,
22_hauppauge_novat_500, 23_pad2keys, 24_freecom_dvbt
to give a description of the patches.
* debian/control:
- Have lirc depend on setserial, so that lirc.postinst can
customize things. (LP: #152871)
* debian/lirc.links:
- Add symlink from /etc/lirc/lircd.conf -> /etc/lircd.conf
to prevent confusion for users coming from different distros.
- Add symlink for transmitter.hwdb to different share directories.
* debian/hardware.conf
- Change top level remotes, drivers, etc to be remote specific.
- Add support for transmitters.
- Default to having lircd off until the maintainer scripts have
updated things.
* debian/lirc.init.d:
- Reorder checking for hardware.conf, to make sure it occurs earlier.
- Update init script to use LSB output.
- Update init script to have the ability to spawn multiple lirc
processes.
* Drop devfs.conf and devfs.devices since devfs is no longer used
in Ubuntu.
* debian/rules:
- No longer install devfs.conf and devfs.devices.
- Install transmitter.hwdb
- Install usr/share/lirc/transmitters
* debian/lirc.templates:
- Add extra templates for our chosen transmitter, device, driver,
modules, and lircd_conf
- Update all old device, driver, modules, and lircd_conf templates
to be for remote only.
- Remove extra space from remote template.
- Add template for whether to enable/disable lircd.
- Add a template for serial port selection (LP: 152871)
* debian/lirc.postinst:
- Unload all modules when issuing a reconfigure command.
- In check_hardware_conf, don't write UNCONFIGURED, just write
empty quotes to make sure we don't throw things off.
- In check_hardware_conf, write out all our new modules as
necessary.
- In Save & DebconfLoad, read and store all new transmitter
variables.
- In ChooseRemote, read old values from hardware.conf rather than
debconf, since debconf is not designed to be used as a database,
but rather an intermediatary storage method.
- In ChooseRemote, add transmitter support.
- In ChooseRemote, define what lirc device we are using for
dev/input as described in:
https://blueprints.launchpad.net/mythbuntu/+spec/lirc-gpio-alternative
- Remove clause to mv /etc/lircd.conf to /etc/lirc
- Write out START_LIRCD, depending on whether we have remotes/transmitters
enabled or disabled.
- Check for REMOTE_DRIVER entitled 'none' and set it to ''.
- Write out a lircd.conf with include directives and a description of how
to update rather than copying the single file over.
- Add support to customize serial port (LP: #152871)
- No longer setup modutils (only applicable for kernel 2.4)
* debian/lirc.preinst:
- Migrate old hardware.conf over to new syntax in case user does not
replace it upon package installation.
-- Mario Limonciello <[EMAIL PROTECTED]> Thu, 27 Dec 2007 23:16:40
-0600
** Changed in: lirc (Ubuntu)
Status: Triaged => Fix Released
--
Lirc 0.8.2-0ubuntu8 doesn't allow changing serial port address
https://bugs.launchpad.net/bugs/152871
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
