** Description changed: [Description] Since Noble, turning Bluetooth slider on ON after toggling it OFF for ~1min seems to only power on and unblock rfkill on the controller, but not enable scanning. This makes the "Devices" list shows no devices, as if the controller wasn't functioning. This is observable on both Dell XPS 13 Plus and HP Elite Book 1040 x360 with stock Noble image. - Note that if manually executing "scan on" command in the bluetoothctl - will make scanning in g-c-c back to normal. + Note that manually executing "scan on" command in the bluetoothctl will + make scanning in g-c-c back to normal. Also note that if leave the Bluetooth slider on, switch to another tab in settings, and switch back to the Bluetooth tab, this will somehow activate scanning again. New devices will pop up again in the "Devices" list. [Steps to reproduce] 1. Open the control center and switch to the Bluetooth tab. 2. Toggle ON and OFF the Bluetooth slider and leave it at OFF for 1 minutes. 3. Turn it back on. 4. At this moment the devices listed "Device" will disappear one by one, and - eventually no device will present. + eventually no device will present.
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2081672 Title: Scanning not enabled by the Bluetooth slider To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/2081672/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
