I tested the jammy version of this package by following the test plan described above:
* Install image from this link on an AGX Orin devkit: https://cdimage.ubuntu.com/nvidia-tegra/ubuntu-server/jammy/daily- preinstalled/manual/jammy-preinstalled-server-arm64+tegra-igx.img.xz * run `sudo apt update && sudo apt install -y linux-nvidia-tegra-jetson && sudo apt upgrade' * reboot system without a monitor connected. Connect a monitor and verify there is no video output * reboot system with a monitor connected. Verify there is video output, then run `$ sudo rtcwake -m no -s 30 && sudo systemctl suspend` and verify there is no video output after the system wakes up. * Enable jammy-proposed packages and run `sudo apt install -y nvidia- tegra-defaults` to upgrade from 1.3~22.04.2 to 1.3~22.04.3 * Reboot without a monitor connected. Connect a monitor after boot and verify there is video output * Reboot with a monitor connected. Run `$ sudo rtcwake -m no -s 30 && sudo systemctl suspend` and verify there is video output again after the system wakes up. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2085541 Title: [SRU] [nano] [agx] [nx] No video output after suspend To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-tegra-defaults/+bug/2085541/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
