This bug was fixed in the package linux-raspi - 6.14.0-1003.3
---------------
linux-raspi (6.14.0-1003.3) plucky; urgency=medium
* plucky/linux-raspi: 6.14.0-1003.3 -proposed tracker (LP: #2100493)
* CONFIG_EFI_STUB support disabled since 6.5.0-1002.2 (LP: #2053147)
- [Config] raspi: Set EFI=y
* Packaging resync (LP: #1786013)
- [Packaging] resync git-ubuntu-log
* Miscellaneous Ubuntu changes
- [Config] raspi: updateconfigs following rebase to Ubuntu-6.14.0-5.5
- raspi: Update to upstream raspberrypi rpi-6.14.y (2025-02-28)
- [Config] raspi: updateconfigs after updating rpi-6.14.y patchset
* Miscellaneous upstream changes
- configs: Regenerate defconfigs"
- Revert "Revert "media: i2c: imx290: Register 0x3011 varies between imx327
and imx290""
- drm/edid: When reset, assume HDMI displays support RGB444
- configs: Enable more ZRAM backends
- overlays: Add OpenHydroponics RootMaster overlay
- arm64: dts: Add the Audio Out block to rp1.dtsi
- clk: rp1: Allow audio out to use PLL_AUDIO_SEC; workaround rounding error
- sound: soc: raspberrypi: RP1 Audio Out driver as an ASOC DAI
- dts: overlays: Enable RP1 Audio Out using audremap-pi5-overlay
- media: i2c: arducam-pivariety: Fix mutex init and NULL pointer
- misc: rp1-pio: Demote fw probe error to warning
- dts: Add hogs for RP1 GPIO 46/48 on CM5
- spi: rp2040-gpio-bridge: fix gpiod error handling
- spi: rp2040-gpio-bridge: probe: Cfg fast_xfer clk
[ Ubuntu: 6.14.0-5.5 ]
* plucky/linux: 6.14.0-5.5 -proposed tracker (LP: #2100254)
* Miscellaneous Ubuntu changes
- [Packaging] Sync riscv64.mk with linux-riscv tree
- [Packaging] clean up the distclean rule
- [Config] updateconfigs following v6.14-rc4 rebase
linux-raspi (6.14.0-1002.2) plucky; urgency=medium
* Kernel compiled with different CONFIG_SERIAL_8250_NR_UARTS to Raspberry Pi
OS (LP: #2096796)
- [Config] raspi: Set SERIAL_8250_NR_UARTS=16
* Packaging resync (LP: #1786013)
- [Packaging] update update.conf
- [Packaging] resync git-ubuntu-log
* Miscellaneous Ubuntu changes
- [packaging] raspi: split flavour-control.stub
- [packaging] raspi: remove DESC and =HUMAN= substitution
- [Config] raspi: updateconfigs following rebase to Ubuntu-6.14.0-4.4
[ Ubuntu: 6.14.0-4.4 ]
* plucky/linux: 6.14.0-4.4 -proposed tracker (LP: #2098875)
* Packaging resync (LP: #1786013)
- [Packaging] debian.master/dkms-versions -- update from kernel-versions
(main/d2025.02.11)
* update apparmor and LSM stacking patch set (LP: #2028253)
- SAUCE: apparmor4.0.0 [1/53]: Stacking: Audit: Create audit_stamp structure
- SAUCE: apparmor4.0.0 [2/53]: Stacking: Audit: Allow multiple records in an
audit_buffer
- SAUCE: apparmor4.0.0 [3/53]: Stacking: LSM: security_lsmblob_to_secctx
module selection
- SAUCE: apparmor4.0.0 [4/53]: Stacking: Audit: Add record for multiple task
security contexts
- SAUCE: apparmor4.0.0 [5/53]: Stacking: Audit: multiple subject lsm values
for netlabel
- SAUCE: apparmor4.0.0 [6/53]: Stacking: Audit: Add record for multiple
object
contexts
- SAUCE: apparmor4.0.0 [7/53]: Stacking: LSM: Single calls in secid hooks
- SAUCE: apparmor4.0.0 [8/53]: Stacking: LSM: Exclusive secmark usage
- SAUCE: apparmor4.0.0 [9/53]: Stacking: Audit: Call only the first of the
audit rule hooks
- SAUCE: apparmor4.0.0 [10/53]: Stacking: AppArmor: Remove the exclusive
flag
- SAUCE: apparmor4.0.0 [11/53]: 6.15 apparmor-next: apparmor: Use
str_yes_no()
helper function
- SAUCE: apparmor4.0.0 [12/53]: 6.15 apparmor-next: apparmor: Improve debug
print infrastructure
- SAUCE: apparmor4.0.0 [13/53]: 6.15 apparmor-next: apparmor: cleanup:
attachment perm lookup to use lookup_perms()
- SAUCE: apparmor4.0.0 [14/53]: 6.15 apparmor-next: apparmor: remove
redundant
unconfined check.
- SAUCE: apparmor4.0.0 [15/53]: 6.15 apparmor-next: apparmor: switch signal
mediation to use RULE_MEDIATES
- SAUCE: apparmor4.0.0 [16/53]: 6.15 apparmor-next: apparmor: ensure labels
with more than one entry have correct flags
- SAUCE: apparmor4.0.0 [17/53]: 6.15 apparmor-next: apparmor: remove
explicit
restriction that unconfined cannot use change_hat
- SAUCE: apparmor4.0.0 [18/53]: 6.15 apparmor-next: apparmor: cleanup:
refactor file_perm() to doc semantics of some checks
- SAUCE: apparmor4.0.0 [19/53]: 6.15 apparmor-next: apparmor: carry
mediation
check on label
- SAUCE: apparmor4.0.0 [20/53]: 6.15 apparmor-next: apparmor: add additional
flags to extended permission.
- SAUCE: apparmor4.0.0 [21/53]: 6.15 apparmor-next: apparmor: add support
for
profiles to define the kill signal
- SAUCE: apparmor4.0.0 [22/53]: 6.15 apparmor-next: apparmor: fix
x_table_lookup when stacking is not the first entry
- SAUCE: apparmor4.0.0 [23/53]: 6.15 apparmor-next: apparmor: add ability to
mediate caps with policy state machine
- SAUCE: apparmor4.0.0 [24/53]: 6.15 apparmor-next: apparmor: remove
af_select
macro
- SAUCE: apparmor4.0.0 [25/53]: 6.15 apparmor-next: apparmor: lift kernel
socket check out of critical section
- SAUCE: apparmor4.0.0 [26/53]: 6.15 apparmor-next: apparmor: in preparation
for finer networking rules rework match_prot
- SAUCE: apparmor4.0.0 [27/53]: 6.15 apparmor-next: apparmor: add fine
grained
af_unix mediation
- SAUCE: apparmor4.0.0 [28/53]: 6.15 apparmor-next: apparmor: gate make fine
grained unix mediation behind v9 abi
- SAUCE: apparmor4.0.0 [29/53]: 6.15 apparmor-next: apparmor: fix dbus
permission queries to v9 ABI
- SAUCE: apparmor4.0.0 [30/53]: 6.15 apparmor-next: apparmor: Fix checking
address of an array in accum_label_info()
- SAUCE: apparmor4.0.0 [31/53]: 6.15 apparmor-next: apparmor: Modify
mismatched function name
- SAUCE: apparmor4.0.0 [32/53]: 6.15 apparmor-next: apparmor: Modify
mismatched function name
- SAUCE: apparmor4.0.0 [33/53]: 6.15 apparmor-next: apparmor: fix typos and
spelling errors
- SAUCE: apparmor4.0.0 [34/53]: 6.15 apparmor-next: apparmor: use the
condition in AA_BUG_FMT even with debug disabled
- SAUCE: apparmor4.0.0 [35/53]: 6.15 apparmor-next: apparmor: Remove unused
variable 'sock' in __file_sock_perm()
- SAUCE: apparmor4.0.0 [36/53]: Revert "6.15 apparmor-next: apparmor: fix
dbus
permission queries to v9 ABI"
- SAUCE: apparmor4.0.0 [37/53]: Revert "6.15 apparmor-next: apparmor: gate
make fine grained unix mediation behind v9 abi"
- SAUCE: apparmor4.0.0 [38/53]: patch to provide compatibility with v2.x net
rules
- SAUCE: apparmor4.0.0 [39/53]: apparmor: make debug_values_table static
- SAUCE: apparmor4.0.0 [40/53]: apparmor: Document that label must be last
member in struct aa_profile
- SAUCE: apparmor4.0.0 [41/53]: apparmor: transition from a list of rules
to a
vector of rules
- SAUCE: apparmor4.0.0 [42/53]: setup slab cache for audit data
- SAUCE: apparmor4.0.0 [43/53]: add the ability for profiles to have a
learning cache
- SAUCE: apparmor4.0.0 [44/53]: add unprivileged user ns mediation
- SAUCE: apparmor4.0.0 [45/53]: Add sysctls for additional controls of
unpriv
userns restrictions
- SAUCE: apparmor4.0.0 [47/53]: apparmor: open userns related sysctl so lxc
can check if restriction are in place
- SAUCE: apparmor4.0.0 [48/53]: apparmor: allow profile to be transitioned
when a userns is created
- SAUCE: apparmor4.0.0 [49/53]: Add fine grained mediation of posix mqueues
- SAUCE: apparmor4.0.0 [51/53]: apparmor: add fine grained ipv4/ipv6
mediation
- SAUCE: apparmor4.0.0 [52/53]: add io_uring mediation
- SAUCE: apparmor4.0.0 [53/53]: enable userspace upcall for mediation
- [Config] disable CONFIG_SECURITY_APPARMOR_RESTRICT_USERNS
* update apparmor and LSM stacking patch set (LP: #2028253) // [FFe]
apparmor-4.0.0-alpha2 for unprivileged user namespace restrictions in mantic
(LP: #2032602)
- SAUCE: apparmor4.0.0 [46/53]: userns - make it so special unconfined
profiles can mediate user namespaces
* Miscellaneous Ubuntu changes
- [Packaging] disable signing for ppc64el
- [Packaging] disable signing for s390x
- [packaging] rename to linux
- [Config] update RUSTC version
- [packaging] remove $(wildcard $(DEBIAN)/control.d/*) dependency
- [packaging] avoid piping control-create for error detection
- [packaging] split flavour-control.stub
- [packaging] generate debian/control with correct signed/unsigned
- [packaging] remove DESC and =HUMAN= substitution
- [Packaging] remove unnecessary dependency on control.stub
- [Packaging] add .gitignore and clean more files
- SAUCE: apparmor4.0.0 [50/53]: apparmor: audit mqueue-via-path access as
getattr instead of unlink
- [Packaging] debian.master/dkms-versions -- remove ipu6-drivers,
ipu7-drivers, backport-iwlwifi-dkms and mofed-modules-24.10 FTBFS
linux-raspi (6.14.0-1001.1) plucky; urgency=medium
* Packaging resync (LP: #1786013)
- [Packaging] resync git-ubuntu-log
- [Packaging] update update.conf
- [Packaging] update Ubuntu.md
- [Packaging] debian.raspi/dkms-versions -- update from kernel-versions
(main/devel)
* Missing overlays/README (LP: #1954757)
- SAUCE: (no-up) Install overlays/README
* Make dwc2 the default (LP: #2048861)
- SAUCE: ARM: dts: bcm27xx: Make dwc2 the default
* Raspberry Pi 3B+ doesnt boot from USB on 23.10 Mantic (LP: #2039786)
- SAUCE: Revert "usb: misc: onboard-hub: add support for Microchip USB2514B
USB 2.0 hub"
* IO errors when writing large amounts of data to USB storage in eoan on
RPI2/3 (armhf kernel) (LP: #1852510)
- Add dwc_otg driver
* Miscellaneous Ubuntu changes
- [Packaging] raspi: Initial import of debian.raspi from
oracular:linux-raspi
(6.11.0-1009.9)
- [Packaging] raspi: Sort build dependencies alphabetically
- [Packaging] raspi: Sync packaging files from debian.master
- [Packaging] raspi: Initial version of linux-raspi for Plucky
- raspi: Update to upstream raspberrypi rpi-6.14.y (2025-02-18)
- [Config] raspi: updateconfigs after import of rpi-6.14.y patchset
- SAUCE: arm64: dts: broadcom: Remove downstream dt overlay support
- SAUCE: ARM: dts: overlays: Fix file permissions
- SAUCE: (no-up) ARM: dts: Disable unsupported Raspberry Pi DTBs
- SAUCE: wifi: brcmfmac: Fix field-spanning write in
brcmf_fweh_activate_events()
- SAUCE: staging: vc04_services: Fix field-spanning write in
vc_vchi_cmd_create()
* Miscellaneous upstream changes
- Revert "spi: spidev: Fix CS polarity if GPIO descriptors are used"
- Revert "net: bcmgenet: Request APD, DLL disable and IDDQ-SR"
- Revert "Revert "xhci: add quirk for host controllers that don't update
endpoint DCS""
- Revert "PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream
device"
- Revert "ARM: dts: bcm2711: Add BCM2711 xHCI support"
- Revert "usb: phy: generic: Get the vbus supply"
- Revert "PCI: Warn if no host bridge NUMA node info"
- of: overlay: Correct symbol path fixups
- module: Avoid ABI changes when debug info is disabled
- nvme-pci: Disable Host Memory Buffer usage
- raspberrypi-firmware: Update mailbox commands
- drm/atomic: Don't fixup modes that haven't been reset
- drm: Check whether the gamma lut has changed before updating
- drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_*
- drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors
- drm: Add chroma siting properties
- drm/atomic-helpers: remove legacy_cursor_update hacks
- drm/atomic: If margins are updated, update all planes.
- arm64: setup: Fix build warning
- BCM2708: Add core Device Tree support
- config: Add default configs
- clk: clk-bcm2835: Register the clocks early during the boot process
- clk-bcm2835: Mark used PLLs and dividers CRITICAL
- clk-bcm2835: Add claim-clocks property
- clk-bcm2835: Read max core clock from firmware
- clk-bcm2835: Don't wait for pllh lock
- clk: bcm2835: Add support for setting leaf clock rates while running.
- clk: bcm2835: Allow reparenting leaf clocks while they're running.
- clk-bcm2835: Avoid null pointer exception
- clk-bcm2835: Disable v3d clock
- clk-bcm2835: Use PLLD for DSI0 HS clock
- smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default
- Allow mac address to be set in smsc95xx
- Protect __release_resource against resources without parents
- irq-bcm2836: Avoid "Invalid trigger warning"
- irqchip: bcm2835: Add FIQ support
- irqchip: irq-bcm2835: Add 2836 FIQ support
- spi: spidev: Completely disable the spidev warning
- dmaengine: bcm2835: Load driver early and support legacy API
- rtc: Add SPI alias for pcf2123 driver
- watchdog: bcm2835: Support setting reboot partition
- reboot: Use power off rather than busy spinning when halt is requested
- bcm2835-rng: Avoid initialising if already enabled
- Update vfpmodule.c
- i2c: bcm2835: Add debug support
- irqchip: irq-bcm2836: Remove regmap and syscon use
- amba_pl011: Insert mb() for correct FIFO handling
- amba_pl011: Add cts-event-workaround DT property
- tty: amba-pl011: Avoid rare write-when-full error
- Main bcm2708/bcm2709 linux port
- bcm2708_fb: Add framebuffer driver
- dmaengine: Add support for BCM2708
- MMC: added alternative MMC driver
- mmc: block: Don't do single-sector reads during recovery
- vc_mem: Add vc_mem driver for querying firmware memory addresses
- Add SMI driver
- Add Chris Boot's i2c driver
- char: Add broadcom char drivers back to build files
- char: broadcom: Add vcio module
- drivers: char: add generic gpiomem driver
- firmware: bcm2835: Support ARCH_BCM270x
- leds: Add the "input" trigger, for pwr_led
- Added Device IDs for August DVB-T 205
- Improve __copy_to_user and __copy_from_user performance
- mfd: Add Raspberry Pi Sense HAT core driver
- drivers/mfd: sensehat: Add Raspberry Pi Sense HAT to simple_mfd_i2c
- Input: sensehat-joystick : Revert to downstream keymap
- ASoC: Add support for all the downstream rpi sound card drivers
- Adding Pimidi kernel module.
- rpi_display: add backlight driver and overlay
- bcm2835-virtgpio: Virtual GPIO driver
- OF: DT-Overlay configfs interface
- brcm: adds support for BCM43341 wifi
- hci_h5: Don't send conf_req when ACTIVE
- ARM64: Round-Robin dispatch IRQs between CPUs.
- ARM64: Force hardware emulation of deprecated instructions.
- AXI performance monitor driver (#2222)
- ARM: bcm2835: Set Serial number and Revision
- dwc-otg: FIQ: Fix "bad mode in data abort handler"
- ARM: Activate FIQs to avoid __irq_startup warnings
- i2c-gpio: Also set bus numbers from reg property
- added capture_clear option to pps-gpio via dtoverlay (#2433)
- hid: Reduce default mouse polling interval to 60Hz
- firmware/raspberrypi: Notify firmware of a reboot
- irqchip: irq-bcm2835: Calc. FIQ_START at boot-time
- brcmfmac: Re-enable firmware roaming support
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
MEDIA_SUBDRV_AUTOSELECT
- firmware: raspberrypi: Add backward compatible get_throttled
- firmware: raspberrypi: Report the fw variant during probe
- net: lan78xx: Disable TCP Segmentation Offload (TSO)
- net: lan78xx: Support auto-downshift to 100Mb/s
- lan78xx: Debounce link events to minimize poll storm
- net: lan78xx: Ack pending PHY ints when resetting
- Patching lan78xx for SOF_TIMESTAMPING_TX_SOFTWARE support
- lan78xx: Enable LEDs and auto-negotiation
- media: tc358743: Increase FIFO level to 374.
- media: tc358743: Add support for 972Mbit/s link freq.
- media: tc358743: Check I2C succeeded during probe.
- media: adv7180: Default to the first valid input
- media: adv7180: Add YPrPb support for ADV7282M
- media: videodev2: Add helper defines for printing FOURCCs
- dt-bindings: Document BCM283x CSI2/CCP2 receiver
- media: tc358743: Return an appropriate colorspace from tc358743_set_fmt
- staging: mmal-vchiq: Avoid use of bool in structures
- staging: mmal-vchiq: Add support for event callbacks.
- staging: vc04_services: Support sending data to MMAL ports
- media: videobuf2: Allow exporting of a struct dmabuf
- staging: mmal-vchiq: Fix client_component for 64 bit kernel
- staging: mmal_vchiq: Add in the Bayer encoding formats
- staging: mmal-vchiq: Update mmal_parameters.h with recently defined params
- staging: mmal-vchiq: Free the event context for control ports
- staging: mmal-vchiq: Fix memory leak in error path
- w1: w1-gpio: Make GPIO an output for strong pullup
- arm: bcm2835: Fix FIQ early ioremap
- arm: bcm2835: DMA can only address 1GB
- hwrng: iproc-rng200: Add BCM2838 support
- bcmgenet: constrain max DMA burst length
- bcmgenet: Better coalescing parameter defaults
- net: genet: enable link energy detect powerdown for external PHYs
- usb: add plumbing for updating interrupt endpoint interval state
- xhci: implement xhci_fixup_endpoint for interval adjustments
- usb: xhci: workaround for bogus SET_DEQ_PENDING endpoint state
- usb: xhci: drop and add the endpoint context in xhci_fixup_endpoint()
- ARM: bcm: Backport BCM2711 support from upstream
- i2c: bcm2835: Set clock-stretch timeout to 35ms
- drm/v3d: Clock V3D down when not in use.
- drm/v3d: Suppress all but the first MMU error
- drm/v3d: Remove `v3d->cpu_job`
- hid: usb: Add device quirks for Freeway Airmouse T3 and MX3
- net: bcmgenet: Workaround #2 for Pi4 Ethernet fail
- arch/arm: Add model string to cpuinfo
- arch/arm64: Add Revision, Serial, Model to cpuinfo
- media: i2c: imx477: Support for the Sony IMX477 sensor
- media: i2c: imx519: Support for the Sony IMX519 sensor
- drivers: media: imx296: Disable 2x2 binned mode
- drivers: media: imx296: Updated imx296 driver for external trigger
- drivers: media: i2c: imx296,imx477: Configure tigger_mode every time
- media: i2c: imx296: Updated register setting to fix Fast Trigger
- media: i2c: imx296: Get sensor crop working
- media: i2c: imx296: Add helper for hblank control
- media: i2c: imx296: Set a 1 frame gain delay
- media: i2c: imx296: Add horizontal/vertical flip support
- media: i2c: imx296: Adjust cropping limits
- Documentation: devicetree: Add documentation for imx378 sensor
- v4l2: Add a Greyworld AWB mode.
- staging: bcm2835-camera: Add greyworld AWB mode
- media: v4l2: Add Greyworld AWB control name
- dt-bindings: Add binding for the Infineon IRS1125 sensor
- media: i2c: Add a driver for the Infineon IRS1125 depth sensor
- staging: vchiq_arm: Register vcsm-cma as a platform driver
- staging: vchiq_arm: Register bcm2835-codec as a platform driver
- net: phy: broadcom: Allow ethernet LED mode to be set via device tree
- phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
- phy: broadcom: Add bcm54213pe configuration
- net: phy: broadcom: optionally enable link-down powersave based on DT
- net: phy: BCM54210PE does not support PTP
- staging: vchiq_arm: Set up dma ranges on child devices
- staging: vchiq_arm: Usa a DMA pool for small bulks
- staging: vchiq: Load bcm2835_isp driver from vchiq
- pinctrl: bcm2835: Remove gpiochip on error
- dt-bindings: pci: Add DT docs for Brcmstb PCIe device
- bcmgenet: Disable skip_umac_reset by default
- media: videodev2.h: Add a format for column YUV4:2:0 modes
- media: dt-bindings: media: Add binding for the Raspberry PI HEVC decoder
- RFC: media: Add media_request_{pin,unpin} API
- staging: media: rpivid: Add Raspberry Pi V4L2 H265 decoder
- spi: Force CS_HIGH if GPIO descriptors are used
- media: uapi: v4l2-core: Add sensor ancillary data V4L2 foucc type.
- media: uapi: Add MEDIA_BUS_FMT_SENSOR_DATA media bus format
- media: uapi: v4l2-core: Add ISP statistics output V4L2 fourcc type
- media: uapi: v4l-ctrls: Add CID base for the bcm2835-isp driver
- staging: vc04_services: mmal-vchiq: Update parameters list
- staging:vc04_services: bcm2835-camera: Request headers with I-frame
- gpiolib: Don't prevent IRQ usage of output GPIOs
- brcmfmac: Prefer a ccode from OTP over nvram file
- media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface
- media: bcm2835-unicam: Add support for get_mbus_config to set num lanes
- media: bcm2835-unicam: Avoid gcc warning over {0} on endpoint
- serial: 8250: bcm2835aux - defer if clock is zero
- media: bcm2835-unicam: Reinstate V4L2_CAP_READWRITE in the caps
- media: bcm2835-unicam: Ensure type is VIDEO_CAPTURE in [g|s]_selection
- media: bcm2835: unicam: Set VPU min clock freq to 250Mhz.
- dt-bindings: bcm2835-unicam: Update documentation with new clock params
- leds: Add the actpwr trigger
- media: bcm2835-unicam: Drop WARN on uing direct cache alias
- media: bcm2835-unicam: Always service interrupts
- media: bcm2835: unicam: Fix uninitialized warning
- media: bcm2835-unicam: Fixup review comments from Hans.
- media: bcm2835-unicam: Retain packing information on G_FMT
- media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1
- staging/fbtft: Add support for display variants
- brcmfmac: Increase power saving delay to 2s
- staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
- staging: vc04_services: Add new vc-sm-cma driver
- staging: vchiq-mmal: Add support for 14bit Bayer
- staging: mmal-vchiq: Add monochrome image formats
- staging: mmal-vchiq: Use vc-sm-cma to support zero copy
- staging: vc04_services: Add a V4L2 M2M codec driver
- uapi: bcm2835-isp: Add bcm2835-isp uapi header file
- staging: vc04_services: ISP: Add a more complex ISP processing component
- gpio: Add gpio-fsm driver
- watchdog: bcm2835: Ignore params after the partition number
- firmware: raspberrypi: Add support for tryonce reboot flag
- Input: edt-ft5x06: Poll the device if no interrupt is configured.
- dt-bindings: Add compatible for BCM2711 DSI1
- media: bcm2835-unicam: Correctly handle error propagation for stream on
- media: bcm2835-unicam: Return early from stop_streaming() if stopped
- media: bcm2835-unicam: Clear clock state when stopping streaming
- PCI: brcmstb: Add BCM2712 support
- staging/vc04_services: Add additional unpacked raw formats
- uapi: bcm2835-isp: Add colour denoise configuration
- spi: bcm2835: Workaround/fix for zero-length transfers
- media: bcm2835-unicam: Fix bug in buffer swapping logic
- Assign crypto aliases to different AES implementation modules
- media: ov5647: Fix return codes from ov5647_write/ov5647_read functions.
- media: i2c: ov5647: Parse and register properties
- staging/bcm2835-camera: Add support for DMABUFs
- staging: fbtft: Add minipitft13 variant
- staging/bcm2835-camera: Add support for H264 levels 4.1 and 4.2
- media: i2c: ov5647: Correct pixel array offset
- media: i2c: ov5647: Correct minimum VBLANK value
- media: i2c: ov5647: Fix v4l2-compliance failure subscribing to events
- media: bcm2835-unicam: Forward input status from subdevice
- media: i2c: ov7251: Add fwnode properties controls
- drm/panel/raspberrypi-touchscreen: Use independent I2C actions with delay.
- drm/panel-simple: Add a timing for the Raspberry Pi 7" panel
- drm/panel: jdi-lt070me05000: Use gpiod_set_value_cansleep
- Extending ili9881c driver support for nwe080 panel
- dt-bindings: ili9881c: add compatible string for new panels
- drm/panel: Add panel driver for TDO Y17B based panels
- drm/panel: Add panel driver for Waveshare DSI touchscreens
- dt-bindings: vendor-prefixes: Add Geekworm
- dt-bindings: display: simple: add Geekworm MZP280 Panel
- dt-bindings: display: panel-dsi bindings
- staging/vchiq-mmal: Add buffer flags for interlaced video
- staging/vchiq-mmal: Add parameters for interlaced video support
- staging/vchiq-mmal: Add the deinterlace image effects enums
- Add Raspberry Pi PoE+ HAT support
- staging/mmal-vchiq: Add module parameter to enable logging.
- staging: mmal-vchiq: Reset buffers_with_vpu on port_enable
- hwmon: (pwm-fan) Add fan speed register support
- drivers/gpio: Add a driver that wraps the PWM API as a GPIO controller
- media: i2c: ov5647: Sensor should report RAW color space
- media/bcm2835-unicam: Parse pad numbers correctly
- media/bcm2835-unicam: Add support for configuration via MC API
- staging/bcm2835-camera: Add support for H264_MIN_QP, H264_MAX_QP
- staging/bcm2835-camera: Add support for MPEG_VIDEO_FORCE_KEY_FRAME
- brcmfmac: Don't promote INFO logging to ERR
- media: i2c: ov5647: Support HFLIP and VFLIP
- spi: spidev: Restore loading from Device Tree
- drivers: bcm2835_unicam: Add logging message when a frame is dropped.
- regulator/rpi-panel-attiny: Don't read the LCD power status
- rtc: pcf8523: Fix oscillator stop bit handling
- media: i2c: ov5647: Add support for regulator control.
- media: i2c: ov7251: Make the enable GPIO optional.
- uapi/v4l2-controls: Reset V4L2_CID_USER_BCM2835_ISP_BASE to same as 5.10
- mfd: simple-mfd-i2c: Add configuration for RPi POE HAT
- pwm: raspberrypi-poe: Add option of being created by MFD or FW
- power: rpi-poe: Drop CURRENT_AVG as it is not hardware averaged
- power: rpi-poe: Add option of being created by MFD or FW
- drivers: bcm2835_unicam: Disable trigger mode operation
- media: bcm2835-unicam: Set ret on error path in unicam_async_complete()
- bindings: Add sck-idle-input to spi-gpio
- spi: gpio: Add sck-idle-input property
- media: bcm2835-unicam: Handle a repeated frame start with no end
- media: i2c: ov7251: Reinstate setting ov7251_global_init_setting
- media/i2c: Add driver for Omnivision OV2311
- dt-bindings: media: i2c: Add binding for ad5398 VCM
- media: i2c: Add driver for AD5398 VCM lens driver
- media: i2c: ov5647: Use v4l2_async_register_subdev_sensor for lens binding
- mm,page_alloc,cma: introduce a customisable threshold for allocating pages
in cma
- tpm_tis_spi_main: Force probe routine to run synchronously with driver and
device registration when IMA is enabled
- dt-bindings: vendor-prefixes: Add Arducam
- media: dt-bindings: media: i2c: Add Arducam Pivariety Series CMOS sensor
binding
- media: i2c: Add driver of Arducam Pivariety series camera
- thermal: broadcom: Use dev_err_probe to suppress defer errors
- dt-bindings: hwmon: add microchip,emc2305.yaml dt binding description.
- hwmon: emc2305: fixups for driver submitted to mailing lists
- random: do not use jump labels before they are initialized
- media: dt-bindings: media: i2c: Add Arducam 64MP CMOS sensor binding
- media: i2c: Add driver of Arducam 64MP camera
- Add HDMI1 facility to the driver.
- Populate phy driver block for BCM54213PE
- media: bcm2835-unicam: Correctly handle FS + FE ISR condtion
- media: video-mux: Read CSI2 config from FW, and pass to receiver
- media: bcm2835-unicam: Fix for possible dummy buffer overrun
- media: bcm2835-unicam: Fix up start/stop api change
- media: adv7180: Nasty hack to allow input selection.
- media: i2c: ov7251: Add module param to select ext trig mode
- net: bcmgenet: Add 'eee' module parameter
- media: dt-bindings: Add DW9817 to DW9807 binding
- media: dw9807-vcm: Add support for DW9817 bidirectional VCM driver
- media: dt-bindings: Add regulator to dw9807-vcm
- media: dw9807-vcm: Add regulator support to the driver
- media: dw9807-vcm: Smooth the first user movement of the lens
- dtbindings: media: i2c: Add IMX708 CMOS sensor binding
- media/i2c: Add a driver for the Sony IMX708 image sensor
- media: bcm2835-unicam: Use mipi-csi2.h header for data type values
- media: bcm2835-unicam: Add support for RAW16 formats
- iio: adc: mcp3422: Add correct compatible strings
- gpio: pca953x: Add ti,tca9554 compatible string
- hwmon: (aht10): Add DT compatible string
- hwmon: (ds1621) Add DT compatible strings
- rtc: ds3232: Add DT compatible string for ds3234
- hwmon: (sht3x) Add DT compatible string
- iio: light: tsl4531: Add DT compatible string
- media: i2c: imx219: Correct the minimum vblanking value
- hwrng: bcm2835 - sleep more intelligently
- fbdev: Don't cancel deferred work if pagelist empty
- dt-bindings: media: i2c: Replace IMX708 sensor binding documentation file
- media: bcm2835-unicam: Start and stop media_pipeline with same node
- input: goodix: Add option to poll instead of relying on IRQ line
- serial: 8250: Add NOMSI bug for bcm2835aux
- Bluetooth: hci_sync: Add fallback-bd-address prop
- Bluetooth: hci_bcm: Add more invalid BDADDRs
- pinctrl: bcm2835: Workaround for edge IRQ loss
- mmc: bcm2835: Use phys addresses for slave DMA config
- spi: bcm2835: Use phys addresses for slave DMA config
- pps: Compatibility hack should be X86-specific
- serial: sc16is7xx: Read modem line state at startup
- drivers: media: bcm2835_unicam: Improve frame sequence count handling
- xhci: quirks: add link TRB quirk for VL805
- usb: xhci: borrow upstream TRB_FETCH quirk on VL805 hosts
- usb: xhci: add VLI_SS_BULK_OUT_BUG quirk
- usb: xhci: add XHCI_VLI_HUB_TT_QUIRK
- cfg80211: ship debian certificates as hex files
- drm/ili9486: Resolve clash in spi_device_id names
- bcm2835-unicam: hacks to allow it to build
- rtc: rv3028: Add backup switchover mode support
- gpio_brcmstb: Allow to build for ARCH_BCM2835
- Allow RESET_BRCMSTB on ARCH_BCM2835
- pinctrl: bcm2712 pinctrl/pinconf driver
- mmc: brcmstb: add support for BCM2712
- sdhci: Add SD Express hook
- irqchip: irq-bcm2712-mip: Support for 2712's MIP
- reset: reset-brcmstb-rescal: Support shared use
- net: macb: Also set DMA coherent mask
- usb: dwc3: Set DMA and coherent masks early
- dt-binding: mfd: Add binding for Raspberry Pi RP1
- mfd: Add rp1 driver
- dt-bindings: clock: Add bindings for Raspberry Pi RP1
- clk: Add rp1 clock driver
- dt-bindings: pinctrl: Add bindings for Raspberry Pi RP1
- pinctrl: Add rp1 driver
- serial: pl011: rp1 uart support
- mmc: sdhci-of-dwcmshc: define sdio timeout clocks
- clk: rp1: Add sdio-clk driver
- i2c: designware: Add SMBUS quick command support
- dmaengine: dw-axi-dmac: Fixes for RP1
- spi: dw: Handle combined tx and rx messages
- pwm: Add support for RP1 PWM
- drm: Add RP1 DSI driver
- drm: Add RP1 DPI driver
- drm: Add RP1 VEC driver
- nvmem: raspberrypi: Add nvmem driver for accessing OTP data
- dt-bindings: net: cdns,macb: AXI tuning properties
- hwmon: Add RP1 ADC and temperature driver
- mfd: bcm2835-pm: Add support for BCM2712
- soc: bcm: bcm2835-power: Add support for BCM2712
- spi: gpio: Fix spi-gpio to correctly implement sck-idle-input
- spi: spi-gpio: Implement spidelay when requested bit rate <= 1 Mbps
- dt-bindings: gpu: v3d: Add BCM2712 to compatibility list
- dmaengine: bcm2835: Add BCM2712 support
- dmaengine: bcm2835: HACK: Support DMA-Lite channels
- dmaengine: bcm2835: Rename to_bcm2711_cbaddr to to_40bit_cbaddr
- drivers: iommu: Add BCM2712 IOMMU
- irqchip/irq-brcmstb-l2: Add config for 2711 controller
- rtc: rtc-rpi: Add simple RTC driver for Raspberry Pi
- dt-bindings: rtc: new binding for Raspberry Pi RTC driver
- media: i2c: Move Kconfig entry for IMX477 to the camera sensor section
- media: i2c: ov9282: Read chip ID via 2 reads
- fbdev: Allow client to request a particular /dev/fbN node
- drm/fb-helper: Look up preferred fbdev node number from DT
- dt-bindings: PCI: brcmstb: add optional property - "brcm,tperst-clk-ms"
- drivers: mmc: sdhci: add SPURIOUS_INT_RESP quirk
- dt-bindings: mmc: sdhci-of-dwcmhsc: Add Raspberry Pi RP1 support
- Add ability to export gpio used by gpio-poweroff
- gpio-poweroff: Disable the WARN
- w1: Disable kernel log spam
- xhci: Use more event ring segment table entries
- drivers: thermal: step_wise: add support for hysteresis
- media/i2c: ov7251: Switch from V4L2_CID_GAIN to V4L2_CID_ANALOGUE_GAIN
- drm/bridge: display-connector: Select DRM_KMS_HELPER
- dtc update
- media: dt-bindings: i2c: Add Rohm BU64754 bindings
- media: i2c: Add ROHM BU64754 Camera Autofocus Actuator
- firmware/psci: Pass given partition number through
- media: i2c: adv7180: Use MEDIA_BUS_FMT_UYVY8_1X16 for CSI2 output
- media: i2c: adv7180: Add support for V4L2_CID_LINK_FREQ
- spi: bcm2835: Support spi0-0cs and SPI_NO_CS mode
- dt-bindings: usb: update dwc3 bindings for parkmode-disable quirks
- drivers: usb: dwc3: add FS/LS bus instance parkmode disable bit
- i2c: designware: Use SCL rise and fall times in DT
- i2c: designware: Support non-standard bus speeds
- serial: sc16is7xx: Don't spin if no data received
- arm64/Kconfig: Don't set DMA_BOUNCE_UNALIGNED_KMALLOC
- Bluetooth: btbcm: Add entry for BCM43439 UART BT
- dt-bindings: add additional RP1 PLL output channels
- regulator: Add a regulator for the new LCD panels
- i2c: mux: Add support for generic base-nr property
- non-upstream: support DS1 exit firmware re-download
- brcmfmac: Fix interoperating DPP and other encryption network access
- brcmfmac: support external SAE authentication in station mode
- brcmfmac: Fix 802.1x
- drivers: mmc: add SD support for Command Queueing
- drivers: mmc: preallocate a block for SD extension register accesses
- drivers: mmc: trigger activity LED when CQE is active
- drivers: sdhci-brcmstb: work around mystery CQE CMD_IDLE_TIMER trampling
- drivers: mmc: cqhci: clear CQHCI_CTL if halt fails
- drivers: mmc: export SD extension register read/write functions
- drivers: mmc: be more cautious when manipulating Command Queue enable
- drivers: mmc: add debugfs entries for SD extension registers
- drivers: mmc: handle 1024-byte SD General Info lengths
- mmc: sdhci-brcmstb: add hs400_downgrade callback for bcm2712
- mmc: sdhci: extend maximum ADMA transfer length to 4MiB
- drivers: mmc: sdhci-brcmstb: improve bcm2712 card removal handling
- drivers: mmc: core: handle card-removal when running CQE recovery
- mmc: restrict posted write counts for SD cards in CQ mode
- mmc: don't reference requests after finishing them
- drivers: mmc: disable write-caching on Samsung 2023 model year SD cards
- mmc: quirks: disable cache on more known-bad Sandisk card date ranges
- mmc: block: disable CQ on SD cards when doing non-Discard erase
- mmc: quirks: add MMC_QUIRK_BROKEN_ERASE for Phison/Integral cards
- i2c: designware: Add support for bus clear feature
- i2c: designware: Make the SDA hold time half LCNT
- media: bcm2835-unicam: Add option for a GPIO to reflect FS/FE timing
- dw-axi-dmac-platform: Avoid trampling with zero length buffer
- drm/panel: Add and initialise an orientation field to drm_panel from OF
- drm/bridge: tc358762: Program the DPI mode into the chip
- drm/bridge: tc358762: revert move ops to enable
- pinctrl: bcm2835: Persist outputs by default
- spi: dw: Handle any number of gpiod CS lines
- regulator: rpi_panel_v2: Add remove and shutdown hooks
- regulator: rpi_panel_v2: Add delay on I2C reads
- backlight: Add a display name to the core, and a function to set it
- drm/bridge: panel: Name an associated backlight device
- drivers: media: pci: Add Hailo accelerator device drivers
- staging: vc04_services: Add helpers for vchiq driver data
- staging: vc04_services: vc-sm-cma: Remove deprecated header
- staging: vc04_services: vc-sm-cma: Drop include Makefile directive
- staging: vc04_services: vc-sm-cma: Register with vchiq_bus_type
- media: bcm2835-unicam: Add support for 12bit mono packed format
- media: bcm2835-unicam: Add support for 14bit mono sources
- media: bcm2835-unicam: Add support for unpacked 14bit Bayer formats
- lan78xx: Read initial EEE status from DT
- lan78xx: Return tx_lpi_timer even if disabled
- staging: vc04_services: vc-sm-cma: Explicitly set DMA mask
- media: pisp_be: Re-introduce multi-context support
- media: pisp_be: Re-introduce video node offset
- spi: dt-bindings: Add RPI RP2040 GPIO Bridge
- spi: Add a driver for the RPI RP2040 GPIO bridge
- dmaengine: dw-axi-dmac: Honour snps,block-size
- brcmfmac: Only match complete feature names
- brcmfmac: Add "extsae" as an alias for "sae_ext"
- brcmfmac: support extsae with psk / 1x offloading
- dt-bindings: clk: rp1: Add clocks representing MIPI DSI byteclock
- media: bcm2835-unicam: Reinstate old downstream driver as legacy
- media: platform: Move bcm2835-unicam compatible to downstream driver
- spi: dw: Save bandwidth with the TMOD_TO feature
- spi: dw: Save bandwidth with the TMOD_RO feature
- spi: dw: don't immediately kill DMA transfers if an error occurs
- drivers: dw-axi-dmac: make more sensible choices about memory accesses
- DT: bindings: add a dma-maxburst property to snps,designware-i2s
- spi: dw: Fix non-DMA transmit-only transfers
- spi: dw: Clamp the minimum clock speed
- hwmon: (adt7410) Add DT compatible strings
- gpiolib: Override gpiochip numbers with DT aliases
- Bluetooth: hci_sync: Fix crash on NULL parent
- rtc: pcf8523: Fix oscillator stop bit handling reading from Control_1
- media: dt-bindings: i2c: Add Sony IMX500
- media: i2c: Add driver for Sony IMX500 sensor
- lib: earlycpio: export symbol find_cpio_data()
- media: i2c: ov5647: Add control of V4L2_CID_HBLANK
- drm: panel: ili9881: Correct symmetry on enable/disable return codes
- drm: panel: ili9881: Add option to reconfigure setup commands
- drivers: media: imx500: Enable LS correction
- NotForUpstream: media: video-mux: Propagate controls to source
- media: i2c: ov5647: Tidy up mode registers to make the order common
- media: i2c: ov5647: Separate out the common registers.
- media: i2c: ov5647: Use the same PLL config for full, 1080p, and binned
modes
- media: i2c: ov5647: Add V4L2_CID_LINK_FREQUENCY control
- dma-buf: system_heap: Allow specifying maximum allocation order
- mm/numa: Allow override of kernel's default NUMA policy
- numa/emulation: Check emulated zones around the CMA window
- drivers: media: bcm2835_isp: Cache LS table dmabuf
- mm/vmscan: Maintain TLB coherency in LRU code
- mmc: quirks: add more broken Kingston Canvas Go! SD card date ranges
- dt-bindings: usb: snps,dwc3: add FS/HS periodic NAK polling quirk
- usb: dwc3: core: add support for setting NAK enhancement bits for FS/HS
- drivers: usb: xhci: prevent a theoretical race on non-coherent platforms
- iio: humidity: dht11: Allow non-zero decimals
- drm: Set non-desktop property to true for writeback and virtual connectors
- drm: Increase plane_mask to 64bit.
- drm: Add a DRM_MODE_TRANSPOSE option to the DRM rotation property
- drm: Add a rotation parameter to connectors.
- dmaengine: dw-axi-dmac: Allow client-chosen width
- spi: dw: Let the DMAC set the transfer widths
- serial: pl011: Request a memory width of 1 byte
- drivers: usb: xhci: set HID bit in streaming endpoint contexts
- media: i2c: imx477: Add options for slightly modifying the link freq
- dmaengine: dw-axi-dmac: Only start idle channels
- mailbox: Add RP1 mailbox support
- firmware: Add an RP1 firmware interface over mbox
- misc: Add RP1 PIO driver
- pwm: Add pwm-pio-rp1 driver
- misc: Add ws2812-pio-rp1 driver
- drm/connector: Initialise max_bpc to the minimum value supported
- drm/connector: hdmi: Attempt YUV422 output if RGB isn't supported
- media: i2c: imx477: Fix link frequency menu
- drm: vc4: dsi: Handle the different command FIFO widths
- dt-bindings: net: cdns,macb: Add compatible for Raspberry Pi RP1
- net: macb: Add support for Raspberry Pi RP1 ethernet controller
- rp1: clk: Only set PLL_SEC_RST in rp1_pll_divider_off
- rp1: clk: Rationalise the use of the CLK_IS_CRITICAL flag
- clk: rp1: Add RP1_CLK_DMA.
- rp1: clk: Remove CLK_IGNORE_UNUSED flags
- drm/vc4: hvs: Defer dlist slots deallocation
- drm/vc4: Add hvs_dlist_allocs debugfs function.
- drm/vc4: Disable overrun interrupts
- drm: vc4: Block swiotlb bounce buffers being imported as dmabuf
- drm/vc4: Add option to call from crtc to encoder on vblank
- drm: vc4: dsi: Clocks should be running before reset
- drm: vc4: Reset DSI AFE on disable
- drm/vc4: Ensure DSI is enabled for FIFO resets
- drm/vc4: Add vblank callback to DSI0 to reset FIFO
- drm/vc4: Fixup mode for 7inch panel on DSI0
- drm/vc4: dsi: Don't reset the host until post_disable
- drm: vc4: dsi: enable video and then retry failed transfers
- drm/vc4: Allow setting the TV norm via module parameter
- drm/vc4: Make VEC progressive modes readily accessible
- drm/vc4: Initialise the tv_mode property default from cmdline_mode.
- drm/vc4: hdmi: Add a clear_infoframe hook
- drm/vc4_hdmi: Allow hotplug detect to be forced
- vc4/hdmi: Ignore hotplug interrupt with force_hotplug
- drm/vc4: Add a delay after disabling hdmi phy output
- drm/vc4: Implement vc6_hdmi_phy_disable
- drm/vc4: Also power down the PLL core when resetting PHY
- drm/vc4: dpi: Add override for RGB order
- vc4/drm:plane: Make use of chroma siting parameter
- drm/vc4: Add support for per plane scaling filter selection
- drm/vc4: Use the TPZ scaling filter for 1x1 source images
- drm/vc4: hvs: Defer updating the enable_bg_fill until vblank
- drm/vc4: Increase number of overlay planes from 16 to 48
- drm/vc4: Assign 32 overlay planes to writeback only
- drm/vc4: Do not include writeback conn load in load tracker
- drm/vc4: Drop panic priority for writeback connector
- drm/vc4: txp: Add a rotation property to the writeback connector
- drm/vc4: Remove request for min clocks when hdmi output is disabled
- drm/vc4: Disable the 2pixel/clock odd timings workaround for interlaced
- drm/vc4: fkms: Add firmware-kms mode
- drm/vc4: tests: Switch generation mockup to a switch
- drm/vc4: tests: Drop drm parameter for vc4_find_crtc_for_encoder
- drm/vc4: tests: Return the allocated output
- drm/vc4: tests: Add BCM2712 mock driver
- drm/vc4: tests: Add tests for BCM2712 PixelValve Muxing
- drm/vc4: tests: Use custom plane state for mock
- drm/vc4: tests: Add function to lookup a plane for a CRTC
- drm/vc4: tests: Add helper to add a new plane to a state
- drm/vc4: tests: Support a few more plane formats
- drm/vc4: tests: Introduce a test for LBM buffer size
- drm/vc4: backport 27e0a194a256 and b3bf19552ea3
- drm/vc4: Cache LBM allocations to avoid double-buffering
- serial: core: Add the Raspberry Pi firmware UART id
- serial: tty: Add a driver for the RPi firmware UART
- input: Add support for no irq to ili210x driver
- drm: panel: Added waveshare 13.3inch panel
- cgroup: Add cgroup_enable option
- drm: bridge: panel: Connector to allow interlaced modes
- drm: Validate connector rotation has one bit set in the rotation property
- docs: pcm3168a: Add DT bindings to force clock consumer mode
- media: imx290: Add module parameter to allow selection of HCG mode
- media: i2c: imx415: Add read/write control of VBLANK
- media: i2c: imx415: Make HBLANK controllable and in consistent units
- media: i2c: imx415: Link frequencies are not exclusive to num lanes
- mmc: sd: filter card CQ support based on an allow-list
- mmc: set MMC_QUIRK_KNOWN_WORKING_SD_CQ on Raspberry Pi class A2 cards
- mmc: use downstream DT property to modify CQE and/or SD CQ behaviour
- media: rp1: Add downstream CFE (Camera Front End) driver
- media: rp1-cfe: Swap "raspberypi,rp1-cfe" compatible to downstream driver
- mmc: bcm2835: Add downstream overclocking support
- media: imx219: Adjust PLL settings based on the number of MIPI lanes
- drivers: media: pisp_be: Add support for YUV422 planar format
- drivers: media: pisp_be: Remove unused fields in struct pisp_be_config
- Enable CONFIG_NETKIT
- configs: Enable Renesas XHCI driver
- dmaengine: bcm2835: Fix a build warning
- spi: dw: Wait for idle after TX
- misc: rp1-pio: Error out on incompatible firmware
- firmware: rp1: Linger on firmware failure
- mailbox: rp1: Don't claim channels in of_xlate
- arm64: dts: Prepare for #size-cells = 2
- arm64: dts: Clean up the downstream patches
- vc4: Add jack detection to HDMI audio driver
- drm/vc4: Use phys addresses for slave DMA config
- dma-direct: take dma-ranges/offsets into account in resource mapping
- dmaengine: bcm2835: Use dma_map_resource
- Revert "PCI: brcmstb: Add BCM2712 support"
- Revert "dt-bindings: PCI: brcmstb: add optional property -
"brcm,tperst-clk-
ms""
- Revert "irqchip: irq-bcm2712-mip: Support for 2712's MIP"
- Revert "Revert "PCI: brcmstb: Configure HW CLKREQ# mode appropriate for
downstream device""
- arm64: dts: Drop downstream PCIe nodes that are about to be superceded
- dt-bindings: interrupt-controller: Add bcm2712 MSI-X DT bindings
- dt-bindings: PCI: brcmstb: Update bindings for PCIe on bcm2712
- irqchip: Add Broadcom bcm2712 MSI-X interrupt controller
- PCI: brcmstb: Reuse config structure
- PCI: brcmstb: Expand inbound window size up to 64GB
- PCI: brcmstb: Add bcm2712 support
- PCI: brcmstb: Adjust PHY PLL setup to use a 54MHz input refclk
- PCI: brcmstb: Adding a softdep to MIP MSI-X driver
- PCI: brcmstb: Fix for missing of_node_put
- arm64: dts: broadcom: bcm2712: Add PCIe DT nodes
- arm64: dts: broadcom: bcm2712-rpi-5-b: Enable PCIe DT nodes
- PCI: brcmstb: Refactor max speed limit functionality
- PCI: brcmstb: Fix error path upon call of regulator_bulk_get()
- PCI: brcmstb: Fix potential premature regluator disabling
- PCI: brcmstb: Use same constant table for config space access
- PCI: brcmstb: Make two changes in MDIO register fields
- PCI: brcmstb: Cast an int variable to an irq_hw_number_t
- dts: bcm2712: add missing brcm,vdm-qos-map to cm5 base dts
- dtoverlays: adds support for Hifiberry ADC8x to the DAC8x
- ASoC: adds ADC8x support to the Hifiberry DAC8x
- Revert "media: i2c: imx290: Register 0x3011 varies between imx327 and
imx290"
- brcmfmac: Fix structure size for WPA3 external SAE
- drm/vc4: PV1 can be driven via any HVS channel, so adapt to allow it
- drm/vc4: tests: Update pv muxing tests now DSI1 is more flexible
- configs: Enable Intel Wireless (PCI) drivers
linux-raspi (6.14.0-1000.0) plucky; urgency=medium
* Initial version of linux-raspi for Plucky
-- Manuel Diewald <[email protected]> Fri, 28 Feb 2025
15:58:35 +0100
** Changed in: linux-raspi (Ubuntu)
Status: New => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2095402
Title:
linux-raspi: add dwarfdump package in the Build-Depends
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-lowlatency/+bug/2095402/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
