** Description changed: - The Radxa Router Hat for the Raspberry Pi provides a PCIe bridge with 2 - network controllers and and m.2 slot for an NVME driver. The NVMe drive - works fine but kernel support for the NICs is missing. + The Dual 2.5G Router HAT + (https://radxa.com/products/accessories/dual-2-5g-router-hat/) for the + Raspberry Pi provides a PCIe bridge with 2 network controllers and and + m.2 slot for an NVME driver. The NVMe drive works fine but kernel + support for the NICs is missing in our kernel. This is the lspci output: 0001:05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05) 0001:06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05) 0002:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) The RTL8125 is supported by the kernel module r8169 which is missing in the kernel. The following additional configuration settings are needed: CONFIG_NET_VENDOR_REALTEK=y CONFIG_R8169=m The same settings are enabled on the amd64 kernel. In the ongoing effort to split the linux-firmware package into smaller packages, please, ensure that the R8125 firmware is made available for the Raspberry. Best regards Heinrich ProblemType: Bug DistroRelease: Ubuntu 26.04 Package: linux-image-6.17.0-1003-raspi 6.17.0-1003.3 ProcVersionSignature: Ubuntu 6.17.0-1003.3-raspi 6.17.0-rc7 Uname: Linux 6.17.0-1003-raspi aarch64 AlsaVersion: Advanced Linux Sound Architecture Driver Version k6.17.0-1003-raspi. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.33.1-0ubuntu3 Architecture: arm64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/controlC1', '/dev/snd/pcmC1D0p', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: N/A Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' Card1.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card1.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CasperMD5CheckResult: unknown CloudArchitecture: aarch64 CloudID: nocloud CloudName: unknown CloudPlatform: nocloud CloudSubPlatform: config-disk (/dev/nvme0n1p1) Date: Tue Dec 23 14:24:47 2025 ImageMediaBuild: 20251222 Lspci-vt: - -[0001:00]---00.0-[01-06]----00.0-[02-06]--+-00.0-[03]----00.0 KIOXIA Corporation NVMe SSD - +-02.0-[04]-- - +-06.0-[05]----00.0 Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller - \-0e.0-[06]----00.0 Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller - -[0002:00]---00.0-[01]----00.0 Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge + -[0001:00]---00.0-[01-06]----00.0-[02-06]--+-00.0-[03]----00.0 KIOXIA Corporation NVMe SSD + +-02.0-[04]-- + +-06.0-[05]----00.0 Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller + \-0e.0-[06]----00.0 Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller + -[0002:00]---00.0-[01]----00.0 Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge Lsusb: - Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub - Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub - Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub - Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub - Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub + Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Lsusb-t: - /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=dwc2/1p, 480M - /: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/2p, 480M - /: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M - /: Bus 004.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/2p, 480M - /: Bus 005.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M + /: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=dwc2/1p, 480M + /: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/2p, 480M + /: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M + /: Bus 004.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/2p, 480M + /: Bus 005.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M PciMultimedia: - + ProcEnviron: - LANG=C.UTF-8 - PATH=(custom, no user) - SHELL=/bin/bash - TERM=vt220 + LANG=C.UTF-8 + PATH=(custom, no user) + SHELL=/bin/bash + TERM=vt220 ProcFB: - + ProcKernelCmdLine: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:07:C5:68 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 multipath=off dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 panic=10 rootwait fixrtc RelatedPackageVersions: - firmware-sof N/A - linux-firmware 20251125.gitff6418d1-0ubuntu1 + firmware-sof N/A + linux-firmware 20251125.gitff6418d1-0ubuntu1 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux-raspi UpgradeStatus: No upgrade log present (probably fresh install) acpidump:
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2137042 Title: Missing CONFIG_R8169 in linux-raspi (6.17.0-1003-raspi) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/2137042/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
