I can independently reproduce this on another Dell Latitude 7450,
including with the current Ubuntu 24.04.5 LTS (Noble HWE) kernel and
USBIO packages.

System:
- Dell Latitude 7450
- BIOS: 1.24.0 (2026-05-25)
- Ubuntu 24.04.5 LTS
- kernel: 7.0.0-38-generic
- USBIO bridge: 2ac1:20c9 SLS Lattice AI USB 2.0
- camera sensor reported by IPU6: OVTI02E1:00 / OV02E10
- linux-modules-usbio-generic-hwe-24.04: 7.0.0-38.38~24.04.4
- oem-somerville-oddish-meta: 24.04ubuntu5
- Secure Boot: disabled

I initially reproduced this on 7.0.0-34-generic, then upgraded to
7.0.0-38-generic and retested. The problem remains unchanged.

IPU6 discovers the sensor:

    intel-ipu6 0000:00:05.0: Found supported sensor OVTI02E1:00
    intel-ipu6 0000:00:05.0: Connected 1 cameras

However, INT3472 repeatedly fails to resolve the USBIO GPIO provider:

    int3472-discrete INT3472:01: cannot find GPIO chip INTC10D1:00, deferring
    int3472-discrete INT3472:0c: cannot find GPIO chip INTC10D1:00, deferring

and eventually:

    platform INT3472:01: deferred probe pending: int3472-discrete: Failed to 
get GPIO
    platform INT3472:0c: deferred probe pending: int3472-discrete: Failed to 
get GPIO

This reproduces consistently on every boot.

The USBIO and camera-related modules are loaded, including:

    gpio_usbio
    i2c_usbio
    usbio
    ov02e10
    intel_skl_int3472_discrete

The downstream symptoms are consistent with the sensor never binding:

- no `/dev/v4l-subdev*` devices are created;
- `media-ctl -d /dev/media0 -p` contains the generic IPU6 CSI2/capture entities 
but no OV02E10 sensor entity;
- the OV02E10 CamHAL configuration is installed at 
`/etc/camera/ipu6epmtl/sensors/ov02e10-uf.xml`;
- nevertheless, `gst-inspect-1.0 icamerasrc` exposes only:

      ar0234_usb_1
      ar0234_usb_2
      ar0234_usb_3
      ar0234_usb_4

  rather than the built-in OV02E10 sensor;
- as a downstream consequence, the v4l2-relayd/PipeWire camera presented to 
applications does not provide a functioning live stream.

This therefore looks like an independent reproduction of the
INTC10D1/USBIO binding problem described in this bug, including on the
current Noble HWE 7.0.0-38 packages.

I have this affected Latitude 7450 available and would be happy to test
the attached USBIO patch and/or an Ubuntu `-proposed` build. I can
provide before/after kernel logs, media graph output, CamHAL device
enumeration, and actual frame-capture verification.

In particular, I can promptly perform SRU verification on this hardware
if a proposed Noble build becomes available. Please let me know if there
is a preferred test build or verification procedure.

I can also provide additional ACPI/DMI information or run `apport-
collect` if useful.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2154140

Title:
  USBIO MTL-CVF ACPI binding missing for Dell Latitude 7450 IPU6 camera

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2154140/+subscriptions


-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to