Public bug reported:
After updating from linux 7.0.0-42.42 to 7.0.0-43.43, the laptop no
longer comes back from suspend. Closing the lid suspends normally (S3 /
"deep"). On opening the lid the kernel logs a clean resume, but the
screen stays black and the machine has to be powered off by holding the
power button.
This is a regression: 7.0.0-42 resumes reliably on the same install with
the same NVIDIA driver version.
7.0.0-42-generic: 32 resumes ("PM: suspend exit"), 32 x "Successfully thawed
unit 'user.slice'"
7.0.0-43-generic: 5 resumes ("PM: suspend exit"), 0 x "Successfully thawed
unit 'user.slice'"
What the journal shows on 7.0.0-43:
1. Lid closed -> nvidia-suspend.service runs -> systemd-sleep: "Successfully
froze unit 'user.slice'" -> "PM: suspend entry (deep)".
2. Lid opened -> "ACPI: PM: Waking up from system sleep state S3" -> "PM:
suspend exit" -> "System returned from sleep operation 'suspend'".
3. The system-sleep post hooks start (hdparm and tlp output is logged).
4. Nothing further from systemd-sleep: no "user.slice: Unit now thawed", no
"Finished systemd-suspend.service", and nvidia-resume.service is never started.
5. The journal stops completely about 6 seconds after resume, every time (5 of
5), until the forced power-off.
On 7.0.0-42 the same sequence continues past step 3 within one second:
user.slice is thawed, systemd-suspend.service finishes, nvidia-
resume.service runs and the desktop returns.
No NVRM/Xid messages, oops or panic are logged, and /sys/fs/pstore is
empty.
Steps to reproduce:
1. Boot 7.0.0-43-generic and log in to a Plasma Wayland session.
2. Close the lid (or suspend from the menu) and wait a few seconds.
3. Open the lid.
Expected: the lock screen / desktop appears.
Actual: black screen; the machine has to be force powered off.
System:
- Ubuntu 26.04.1 LTS, KDE Plasma (Wayland), kwin-wayland 4:6.6.6-0ubuntu0.1,
sddm 0.21.0+git20250502.4fe234b-2ubuntu3
- HP OMEN by HP Laptop, BIOS F.16 (07/07/2021), Intel Core i7-8750H
- Hybrid graphics: Intel UHD 630 (i915, drives the internal eDP panel) + NVIDIA
GeForce GTX 1050 Ti Mobile; prime-select: nvidia
- NVIDIA driver 580.178.04 (nvidia-driver-580 580.178.04-0ubuntu0.26.04.1),
unchanged between the two kernels
- Good: linux-image-7.0.0-42-generic 7.0.0-42.42 +
linux-modules-nvidia-580-7.0.0-42-generic 7.0.0-42.42
- Bad: linux-image-7.0.0-43-generic 7.0.0-43.43 +
linux-modules-nvidia-580-7.0.0-43-generic 7.0.0-43.43
- systemd 259.9-0ubuntu0.1, tlp 1.8.0-1ubuntu2
- /sys/power/mem_sleep = "s2idle [deep]"
- Kernel command line: ro net.ifnames=0 biosdevname=0 quiet splash
- modprobe options: nvidia_drm modeset=1,
NVreg_PreserveVideoMemoryAllocations=1, NVreg_TemporaryFilePath=/var
- nvidia-suspend, nvidia-resume and nvidia-hibernate services enabled
Not yet tested:
- Whether the machine is fully hung or only the display is dead (Caps Lock LED,
SSH).
- Whether SYSTEMD_SLEEP_FREEZE_USER_SESSIONS=false avoids it on 7.0.0-43.
- Whether it happens with prime-select on-demand or with the nouveau driver.
Attached: journal excerpts of one good resume on 7.0.0-42 and one failed
resume on 7.0.0-43.
ProblemType: Bug
DistroRelease: Ubuntu 26.04
Package: linux-image-7.0.0-43-generic 7.0.0-43.43
ProcVersionSignature: Ubuntu 7.0.0-43.43-generic 7.0.14
Uname: Linux 7.0.0-43-generic x86_64
NonfreeKernelModules: nvidia_modeset nvidia
ApportVersion: 2.34.1-0ubuntu0.1
Architecture: amd64
CasperMD5CheckResult: unknown
CurrentDesktop: KDE
Date: Mon Nov 16 17:16:56 2026
InstallationDate: Installed on 2025-08-13 (461 days ago)
InstallationMedia: Kubuntu 25.04 "Plucky Puffin" - Release amd64 (20250417)
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05c8:03ab Cheng Uei Precision Industry Co., Ltd
(Foxlink) HP Wide Vision HD Camera
Bus 001 Device 003: ID 8087:0029 Intel Corp. AX200 Bluetooth
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
MachineType: HP OMEN by HP Laptop
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-7.0.0-43-generic
root=UUID=0b7bcf0e-cc40-4f18-8bf7-a5d49dc76dff ro net.ifnames=0 biosdevname=0
quiet splash
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No
PulseAudio daemon running, or not running as session daemon.
SourcePackage: linux
UpgradeStatus: Upgraded to resolute on 2026-05-14 (186 days ago)
dmi.bios.date: 07/07/2021
dmi.bios.release: 15.16
dmi.bios.vendor: AMI
dmi.bios.version: F.16
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 8466
dmi.board.vendor: HP
dmi.board.version: 68.22
dmi.chassis.type: 10
dmi.chassis.vendor: HP
dmi.chassis.version: Chassis Version
dmi.ec.firmware.release: 68.22
dmi.modalias:
dmi:bvnAMI:bvrF.16:bd07/07/2021:br15.16:efr68.22:svnHP:pnOMENbyHPLaptop:pvr:rvnHP:rn8466:rvr68.22:cvnHP:ct10:cvrChassisVersion:sku4CC49UA#ABA:pfa103C_5335KVHPOMEN:
dmi.product.family: 103C_5335KV HP OMEN
dmi.product.name: OMEN by HP Laptop
dmi.product.sku: 4CC49UA#ABA
dmi.sys.vendor: HP
modified.conffile..etc.default.apport:
# set this to 0 to disable apport, or to 1 to enable it
# you can temporarily override this with
# sudo service apport start force_start=1
enabled=0
mtime.conffile..etc.default.apport: 2026-07-04T14:06:11.262878
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug resolute wayland-session
** Attachment added: "resume Failed"
https://bugs.launchpad.net/bugs/2174679/+attachment/6018684/+files/resume-FAILED-7.0.0-43.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/2174679
Title:
[regression] 7.0.0-43: black screen after S3 resume, user.slice never
thawed (HP OMEN, NVIDIA 580, worked on 7.0.0-42)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2174679/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs