Public bug reported:
Binary package hint: xserver-xorg-video-trident
This system is a Toshiba Tecra M1 with a Trident Microsystems CyberBlade
XP4m32 according to /var/log/Xorg.0.log.
When I upgraded this morning, X would start but just left garbage on the
screen. The keyboard worked, so I could log in, but could not see what I
was doing.
By booting in recovery mode, I was able to cobble together a working xorg.conf
using Xorg -configure, then commenting out the line:
# Load "dri"
And changing the line referring to /dev/mouse to:
Option "Device" "/dev/input/mice"
Before the upgrade, I was using the following line in xorg.conf, but have had
to leave it commented out:
#Option "ShadowFB" "true"
I played around with xorg.conf for a while, but haven't found a
satisfactory solution to get to parity with what I had using 6.06.
My current xorg.conf, as follows, leaves something to be desired:
Whenever I move a window, the content gets garbled. I have to minimize
and restore the window to get a readable version again.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc/"
FontPath "/usr/share/fonts/X11/TTF/"
FontPath "/usr/share/fonts/X11/OTF"
FontPath "/usr/share/fonts/X11/Type1/"
FontPath "/usr/share/fonts/X11/CID/"
FontPath "/usr/share/fonts/X11/100dpi/"
FontPath "/usr/share/fonts/X11/75dpi/"
EndSection
Section "Module"
Load "dbe"
# Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 290 220 # mm
Identifier "Monitor0"
VendorName "TOS"
ModelName "rnal Panel"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "AccelMethod" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "PciRetry" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "SetMClk" # <freq>
#Option "MUXThreshold" # <i>
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "NoMMIO" # [<bool>]
#Option "NoPciBurst" # [<bool>]
#Option "MMIOonly" # [<bool>]
#Option "CyberShadow" # [<bool>]
#Option "CyberStretch" # [<bool>]
#Option "XvHsync" # <i>
#Option "XvVsync" # <i>
#Option "XvBskew" # <i>
#Option "XvRskew" # <i>
#Option "FpDelay" # <i>
#Option "Display1400" # [<bool>]
#Option "Display" # [<str>]
#Option "GammaBrightness" # [<str>]
#Option "TVChipset" # [<str>]
#Option "TVSignal" # <i>
Identifier "Card0"
Driver "trident"
VendorName "Trident Microsystems"
BoardName "CyberBlade XP4m32"
BusID "PCI:1:0:0"
Option "CyberShadow" "True"
#Option "ShadowFB" "true"
Option "NoAccel" "false"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
** Affects: xserver-xorg-video-trident (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
Upgrade from Ubuntu 6.06 to 6.10 beta breaks X
https://launchpad.net/bugs/63049
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
