I have updated my message. Thank you for your answer
** Description changed: I have a Optiarc DVD RW AD-5200A and I can't read audio cds. Ubuntu recognizes it as a blank cd and propose me to burn it. I try to launch it on vlc or totem but it doesn't work. Moreover, I tried to upgrade the firmware downloaded from the manufacturer web site but it doesn't change anything. I test it with a lot of cds audio. Other kinds of cd work properly. Some users have the same problem http://forum.ubuntu-fr.org/viewtopic.php?id=186510 - Here's the result of dmesg command: - - [ 1675.780000] ide: failed opcode was: unknown - [ 1675.780000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 - [ 1675.780000] end_request: I/O error, dev hda, sector 0 - [ 1675.780000] hda: command error: status=0x51 { DriveReady SeekComplete Error } - [ 1675.780000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0 - - Actually, I don't know if it's an hardware or a software problem + Actually, I don't know if it's an hardware or a software problem. + + * dmesg + [ 0.660000] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved + [ 0.660000] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved + [ 0.664000] Time: hpet clocksource has been installed. + [ 0.664000] Switched to high resolution mode on CPU 0 + [ 0.664000] Switched to high resolution mode on CPU 1 + [ 0.692000] PCI: Bridge: 0000:00:04.0 + [ 0.692000] IO window: b000-bfff + [ 0.692000] MEM window: disabled. + [ 0.692000] PREFETCH window: disabled. + [ 0.692000] PCI: Bridge: 0000:00:09.0 + [ 0.692000] IO window: disabled. + [ 0.692000] MEM window: f2000000-f4ffffff + [ 0.692000] PREFETCH window: e0000000-efffffff + [ 0.692000] PCI: Setting latency timer of device 0000:00:04.0 to 64 + [ 0.692000] PCI: Setting latency timer of device 0000:00:09.0 to 64 + [ 0.692000] NET: Registered protocol family 2 + [ 0.736000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) + [ 0.736000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) + [ 0.736000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) + [ 0.736000] TCP: Hash tables configured (established 131072 bind 65536) + [ 0.736000] TCP reno registered + [ 0.752000] checking if image is initramfs... it is + [ 1.304000] Freeing initrd memory: 7062k freed + [ 1.308000] audit: initializing netlink socket (disabled) + [ 1.308000] audit(1201587677.164:1): initialized + [ 1.308000] highmem bounce pool size: 64 pages + [ 1.308000] VFS: Disk quotas dquot_6.5.1 + [ 1.308000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) + [ 1.308000] io scheduler noop registered + [ 1.308000] io scheduler anticipatory registered + [ 1.308000] io scheduler deadline registered + [ 1.308000] io scheduler cfq registered (default) + [ 1.308000] Boot video device is 0000:02:00.0 + [ 1.308000] PCI: Setting latency timer of device 0000:00:09.0 to 64 + [ 1.308000] assign_interrupt_mode Found MSI capability + [ 1.308000] Allocate Port Service[0000:00:09.0:pcie00] + [ 1.308000] isapnp: Scanning for PnP cards... + [ 1.660000] isapnp: No Plug & Play device found + [ 1.684000] Real Time Clock Driver v1.12ac + [ 1.684000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled + [ 1.684000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A + [ 1.684000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A + [ 1.684000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A + [ 1.684000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A + [ 1.684000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize + [ 1.684000] input: Macintosh mouse button emulation as /class/input/input0 + [ 1.684000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 + [ 1.684000] PNP: PS/2 controller doesn't have AUX irq; using default 12 + [ 1.688000] serio: i8042 KBD port at 0x60,0x64 irq 1 + [ 1.688000] mice: PS/2 mouse device common for all mice + [ 1.688000] EISA: Probing bus 0 at eisa.0 + [ 1.688000] Cannot allocate resource for EISA slot 1 + [ 1.688000] EISA: Detected 0 cards. + [ 1.688000] TCP cubic registered + [ 1.688000] NET: Registered protocol family 1 + [ 1.688000] Using IPI No-Shortcut mode + [ 1.688000] Magic number: 8:604:368 + [ 1.688000] Freeing unused kernel memory: 364k freed + [ 1.720000] input: AT Translated Set 2 keyboard as /class/input/input1 + [ 3.080000] AppArmor: AppArmor initialized<5>audit(1201587678.664:2): type=1505 info="AppArmor initialized" pid=1240 + [ 3.096000] fuse init (API version 7.8) + [ 3.104000] Failure registering capabilities with primary security module. + [ 4.280000] usbcore: registered new interface driver usbfs + [ 4.280000] usbcore: registered new interface driver hub + [ 4.280000] usbcore: registered new device driver usb + [ 4.280000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver + [ 4.280000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 + [ 4.280000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16 + [ 4.280000] PCI: Setting latency timer of device 0000:00:02.0 to 64 + [ 4.280000] ohci_hcd 0000:00:02.0: OHCI Host Controller + [ 4.280000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 + [ 4.280000] ohci_hcd 0000:00:02.0: irq 16, io mem 0xf5007000 + [ 4.340000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 + [ 4.340000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx + [ 4.348000] usb usb1: configuration #1 chosen from 1 choice + [ 4.348000] hub 1-0:1.0: USB hub found + [ 4.348000] hub 1-0:1.0: 10 ports detected + [ 4.364000] SCSI subsystem initialized + [ 4.368000] libata version 2.21 loaded. + [ 4.452000] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0 + [ 4.452000] NFORCE-MCP61: chipset revision 162 + [ 4.452000] NFORCE-MCP61: not 100% native mode: will probe irqs later + [ 4.452000] NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling workaround. + [ 4.452000] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller + [ 4.452000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA + [ 4.452000] Probing IDE interface ide0... + [ 4.464000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. + [ 4.756000] usb 1-4: new low speed USB device using ohci_hcd and address 2 + [ 4.960000] usb 1-4: configuration #1 chosen from 1 choice + [ 4.980000] usbcore: registered new interface driver hiddev + [ 4.984000] input: HID 1241:1111 as /class/input/input2 + [ 4.984000] input: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:00:02.0-4 + [ 4.984000] usbcore: registered new interface driver usbhid + [ 4.984000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver + [ 5.188000] hda: Optiarc DVD RW AD-5200A, ATAPI CD/DVD-ROM drive + [ 5.860000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 + [ 5.860000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 + [ 5.860000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17 + [ 5.860000] PCI: Setting latency timer of device 0000:00:02.1 to 64 + [ 5.860000] ehci_hcd 0000:00:02.1: EHCI Host Controller + [ 5.860000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 + [ 5.860000] ehci_hcd 0000:00:02.1: debug port 1 + [ 5.860000] PCI: cache line size of 64 is not supported by device 0000:00:02.1 + [ 5.860000] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf5006000 + [ 5.860000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 + [ 5.860000] usb 1-4: USB disconnect, address 2 + [ 5.864000] usb usb2: configuration #1 chosen from 1 choice + [ 5.864000] hub 2-0:1.0: USB hub found + [ 5.864000] hub 2-0:1.0: 10 ports detected + [ 5.968000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 + [ 5.968000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18 + [ 5.968000] PCI: Setting latency timer of device 0000:00:07.0 to 64 + [ 5.968000] forcedeth: using HIGHDMA + [ 5.980000] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 974kB Cache, UDMA(66) + [ 5.980000] Uniform CD-ROM driver Revision: 3.20 + [ 6.476000] usb 1-4: new low speed USB device using ohci_hcd and address 3 + [ 6.488000] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:07.0 + [ 6.488000] sata_nv 0000:00:08.0: version 3.4 + [ 6.488000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 + [ 6.488000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19 + [ 6.488000] PCI: Setting latency timer of device 0000:00:08.0 to 64 + [ 6.488000] scsi0 : sata_nv + [ 6.492000] scsi1 : sata_nv + [ 6.492000] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 19 + [ 6.492000] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 19 + [ 6.680000] usb 1-4: configuration #1 chosen from 1 choice + [ 6.696000] input: HID 1241:1111 as /class/input/input3 + [ 6.696000] input: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:00:02.0-4 + [ 6.960000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) + [ 7.004000] ata1.00: Host Protected Area detected: + [ 7.004000] current size: 156299375 sectors + [ 7.004000] native size: 156301488 sectors + [ 7.132000] ata1.00: native size increased to 156301488 sectors + [ 7.132000] ata1.00: ATA-7: MAXTOR STM380815AS, 3.AAD, max UDMA/133 + [ 7.132000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) + [ 7.196000] ata1.00: configured for UDMA/133 + [ 7.508000] ata2: SATA link down (SStatus 0 SControl 300) + [ 7.516000] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380815 3.AA PQ: 0 ANSI: 5 + [ 7.528000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) + [ 7.528000] sd 0:0:0:0: [sda] Write Protect is off + [ 7.528000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 + [ 7.528000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA + [ 7.528000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) + [ 7.528000] sd 0:0:0:0: [sda] Write Protect is off + [ 7.528000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 + [ 7.528000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA + [ 7.528000] sda: sda1 sda2 < sda5 > + [ 7.580000] sd 0:0:0:0: [sda] Attached SCSI disk + [ 7.588000] sd 0:0:0:0: Attached scsi generic sg0 type 0 + [ 7.968000] Attempting manual resume + [ 7.968000] swsusp: Resume From Partition 8:5 + [ 7.968000] PM: Checking swsusp image. + [ 7.968000] PM: Resume from disk failed. + [ 8.032000] kjournald starting. Commit interval 5 seconds + [ 8.032000] EXT3-fs: mounted filesystem with ordered data mode. + [ 17.508000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 + [ 17.588000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 + [ 17.604000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 + [ 17.604000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xc800 + [ 17.732000] input: PC Speaker as /class/input/input4 + [ 17.884000] parport_pc 00:09: reported by Plug and Play ACPI + [ 17.884000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] + [ 17.896000] Linux agpgart interface v0.102 (c) Dave Jones + [ 17.928000] nvidia: module license 'NVIDIA' taints kernel. + [ 18.184000] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 + [ 18.184000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 20 + [ 18.184000] PCI: Setting latency timer of device 0000:02:00.0 to 64 + [ 18.184000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 + [ 18.332000] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 + [ 18.332000] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 16 + [ 18.332000] PCI: Setting latency timer of device 0000:00:05.0 to 64 + [ 18.868000] lp0: using parport0 (interrupt-driven). + [ 19.012000] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k + [ 19.024000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended + [ 19.028000] EXT3 FS on sda1, internal journal + [ 20.296000] No dock devices found. + [ 20.496000] input: Power Button (FF) as /class/input/input5 + [ 20.496000] ACPI: Power Button (FF) [PWRF] + [ 20.496000] input: Power Button (CM) as /class/input/input6 + [ 20.496000] ACPI: Power Button (CM) [PWRB] + [ 20.796000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (version 2.00.00) + [ 20.796000] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xa + [ 20.796000] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xb + [ 20.796000] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xd + [ 20.796000] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 + [ 21.876000] ppdev: user-space parallel port driver + [ 22.036000] audit(1201587697.948:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4957 profile="/usr/sbin/cupsd" + [ 22.328000] Failure registering capabilities with primary security module. + [ 22.352000] NET: Registered protocol family 10 + [ 22.352000] lo: Disabled Privacy Extensions + [ 24.004000] Clocksource tsc unstable (delta = -264004828 ns) + [ 26.768000] NET: Registered protocol family 17 + [ 38.624000] eth0: no IPv6 routers present + [ 506.308000] cdrom: This disc doesn't have any tracks I recognize! + [ 506.328000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.328000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.328000] ide: failed opcode was: unknown + [ 506.328000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.328000] end_request: I/O error, dev hda, sector 0 + [ 506.332000] Buffer I/O error on device hda, logical block 0 + [ 506.332000] Buffer I/O error on device hda, logical block 1 + [ 506.332000] Buffer I/O error on device hda, logical block 2 + [ 506.332000] Buffer I/O error on device hda, logical block 3 + [ 506.332000] Buffer I/O error on device hda, logical block 4 + [ 506.332000] Buffer I/O error on device hda, logical block 5 + [ 506.332000] Buffer I/O error on device hda, logical block 6 + [ 506.332000] Buffer I/O error on device hda, logical block 7 + [ 506.332000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.332000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.332000] ide: failed opcode was: unknown + [ 506.332000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.332000] end_request: I/O error, dev hda, sector 0 + [ 506.332000] Buffer I/O error on device hda, logical block 0 + [ 506.332000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.332000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.332000] ide: failed opcode was: unknown + [ 506.336000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.336000] end_request: I/O error, dev hda, sector 4 + [ 506.336000] Buffer I/O error on device hda, logical block 1 + [ 506.336000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.336000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.336000] ide: failed opcode was: unknown + [ 506.336000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.336000] end_request: I/O error, dev hda, sector 32 + [ 506.336000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.336000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.336000] ide: failed opcode was: unknown + [ 506.340000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.340000] end_request: I/O error, dev hda, sector 0 + [ 506.340000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.340000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.340000] ide: failed opcode was: unknown + [ 506.340000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.340000] end_request: I/O error, dev hda, sector 36 + [ 506.340000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.340000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.340000] ide: failed opcode was: unknown + [ 506.340000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.340000] end_request: I/O error, dev hda, sector 0 + [ 506.344000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.344000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.344000] ide: failed opcode was: unknown + [ 506.344000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.344000] end_request: I/O error, dev hda, sector 0 + [ 506.344000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.344000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.344000] ide: failed opcode was: unknown + [ 506.344000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.344000] end_request: I/O error, dev hda, sector 4 + [ 506.348000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.348000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.348000] ide: failed opcode was: unknown + [ 506.348000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.348000] end_request: I/O error, dev hda, sector 0 + [ 506.348000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.348000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.348000] ide: failed opcode was: unknown + [ 506.348000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.348000] end_request: I/O error, dev hda, sector 4 + [ 506.352000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.352000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.352000] ide: failed opcode was: unknown + [ 506.352000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.352000] end_request: I/O error, dev hda, sector 0 + [ 506.352000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.352000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.352000] ide: failed opcode was: unknown + [ 506.352000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.352000] end_request: I/O error, dev hda, sector 4 + [ 506.356000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.356000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.356000] ide: failed opcode was: unknown + [ 506.356000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.356000] end_request: I/O error, dev hda, sector 0 + [ 506.356000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.356000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.356000] ide: failed opcode was: unknown + [ 506.356000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.356000] end_request: I/O error, dev hda, sector 4 + [ 506.356000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.356000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.356000] ide: failed opcode was: unknown + [ 506.360000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.360000] end_request: I/O error, dev hda, sector 0 + [ 506.360000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.360000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.360000] ide: failed opcode was: unknown + [ 506.360000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.360000] end_request: I/O error, dev hda, sector 4 + [ 506.360000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.360000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.360000] ide: failed opcode was: unknown + [ 506.364000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.364000] end_request: I/O error, dev hda, sector 0 + [ 506.364000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.364000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.364000] ide: failed opcode was: unknown + [ 506.364000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.364000] end_request: I/O error, dev hda, sector 4 + [ 506.364000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.364000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.364000] ide: failed opcode was: unknown + [ 506.368000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.368000] end_request: I/O error, dev hda, sector 0 + [ 506.368000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.368000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.368000] ide: failed opcode was: unknown + [ 506.368000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.368000] end_request: I/O error, dev hda, sector 4 + [ 506.372000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.372000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.372000] ide: failed opcode was: unknown + [ 506.372000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.372000] end_request: I/O error, dev hda, sector 0 + [ 506.372000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.372000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.372000] ide: failed opcode was: unknown + [ 506.372000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.372000] end_request: I/O error, dev hda, sector 4 + [ 506.376000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.376000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.376000] ide: failed opcode was: unknown + [ 506.376000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.376000] end_request: I/O error, dev hda, sector 0 + [ 506.376000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.376000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.376000] ide: failed opcode was: unknown + [ 506.376000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.376000] end_request: I/O error, dev hda, sector 4 + [ 506.380000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.380000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.380000] ide: failed opcode was: unknown + [ 506.380000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.380000] end_request: I/O error, dev hda, sector 0 + [ 506.380000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.380000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.380000] ide: failed opcode was: unknown + [ 506.380000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.380000] end_request: I/O error, dev hda, sector 4 + [ 506.384000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.384000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.384000] ide: failed opcode was: unknown + [ 506.384000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.384000] end_request: I/O error, dev hda, sector 0 + [ 506.384000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.384000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.384000] ide: failed opcode was: unknown + [ 506.384000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.384000] end_request: I/O error, dev hda, sector 4 + [ 506.388000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.388000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.388000] ide: failed opcode was: unknown + [ 506.388000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.388000] end_request: I/O error, dev hda, sector 0 + [ 506.388000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.388000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.388000] ide: failed opcode was: unknown + [ 506.388000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.388000] end_request: I/O error, dev hda, sector 4 + [ 506.392000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.392000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.392000] ide: failed opcode was: unknown + [ 506.392000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.392000] end_request: I/O error, dev hda, sector 0 + [ 506.396000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.396000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.396000] ide: failed opcode was: unknown + [ 506.396000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.396000] end_request: I/O error, dev hda, sector 4 + [ 506.396000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.396000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.396000] ide: failed opcode was: unknown + [ 506.396000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.396000] end_request: I/O error, dev hda, sector 0 + [ 506.396000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.396000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.396000] ide: failed opcode was: unknown + [ 506.400000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.400000] end_request: I/O error, dev hda, sector 4 + [ 506.400000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.400000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.400000] ide: failed opcode was: unknown + [ 506.400000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.400000] end_request: I/O error, dev hda, sector 0 + [ 506.400000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.400000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.400000] ide: failed opcode was: unknown + [ 506.404000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.404000] end_request: I/O error, dev hda, sector 4 + [ 506.404000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.404000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.404000] ide: failed opcode was: unknown + [ 506.404000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.404000] end_request: I/O error, dev hda, sector 0 + [ 506.404000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.404000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.404000] ide: failed opcode was: unknown + [ 506.408000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.408000] end_request: I/O error, dev hda, sector 4 + [ 506.408000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.408000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.408000] ide: failed opcode was: unknown + [ 506.408000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.408000] end_request: I/O error, dev hda, sector 0 + [ 506.408000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.408000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.408000] ide: failed opcode was: unknown + [ 506.412000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.412000] end_request: I/O error, dev hda, sector 4 + [ 506.412000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.412000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.412000] ide: failed opcode was: unknown + [ 506.412000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.412000] end_request: I/O error, dev hda, sector 0 + [ 506.412000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.412000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.412000] ide: failed opcode was: unknown + [ 506.412000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.412000] end_request: I/O error, dev hda, sector 4 + [ 506.416000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.416000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.416000] ide: failed opcode was: unknown + [ 506.416000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.416000] end_request: I/O error, dev hda, sector 0 + [ 506.416000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.416000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.416000] ide: failed opcode was: unknown + [ 506.416000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.416000] end_request: I/O error, dev hda, sector 4 + [ 506.420000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.420000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.420000] ide: failed opcode was: unknown + [ 506.420000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.420000] end_request: I/O error, dev hda, sector 0 + [ 506.420000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.420000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.420000] ide: failed opcode was: unknown + [ 506.420000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.420000] end_request: I/O error, dev hda, sector 4 + [ 506.424000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.424000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.424000] ide: failed opcode was: unknown + [ 506.424000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.424000] end_request: I/O error, dev hda, sector 0 + [ 506.424000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.424000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.424000] ide: failed opcode was: unknown + [ 506.424000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.424000] end_request: I/O error, dev hda, sector 4 + [ 506.424000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.424000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.424000] ide: failed opcode was: unknown + [ 506.428000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.428000] end_request: I/O error, dev hda, sector 0 + [ 506.428000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.428000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.428000] ide: failed opcode was: unknown + [ 506.428000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.428000] end_request: I/O error, dev hda, sector 4 + [ 506.428000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.428000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.428000] ide: failed opcode was: unknown + [ 506.432000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.432000] end_request: I/O error, dev hda, sector 0 + [ 506.432000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.432000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.432000] ide: failed opcode was: unknown + [ 506.432000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.432000] end_request: I/O error, dev hda, sector 4 + [ 506.432000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.432000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.432000] ide: failed opcode was: unknown + [ 506.436000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.436000] end_request: I/O error, dev hda, sector 0 + [ 506.436000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.436000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.436000] ide: failed opcode was: unknown + [ 506.436000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.436000] end_request: I/O error, dev hda, sector 4 + [ 506.444000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.444000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.444000] ide: failed opcode was: unknown + [ 506.444000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.444000] end_request: I/O error, dev hda, sector 0 + [ 506.444000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.444000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.444000] ide: failed opcode was: unknown + [ 506.448000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.448000] end_request: I/O error, dev hda, sector 4 + [ 506.452000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.452000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.452000] ide: failed opcode was: unknown + [ 506.452000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.452000] end_request: I/O error, dev hda, sector 0 + [ 506.452000] hda: command error: status=0x51 { DriveReady SeekComplete Error } + [ 506.452000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } + [ 506.452000] ide: failed opcode was: unknown + [ 506.452000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00 + [ 506.452000] end_request: I/O error, dev hda, sector 4 + + *cat /proc/version_signature + Ubuntu 2.6.22-14.47-generic + + *uname -a + Linux helios91-desktop 2.6.22-14-generic #1 SMP Tue Dec 18 08:02:57 UTC 2007 i686 GNU/Linux + + *sudo lspci -vvnn + 00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1) + Subsystem: Giga-byte Technology Unknown device [1458:5001] + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0 + Capabilities: [44] HyperTransport: Slave or Primary Interface + Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL- + Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- + Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- + Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- + Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn- + Revision ID: 1.03 + Link Frequency 0: 1.0GHz + Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- + Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- + Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- + Link Frequency 1: 200MHz + Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- + Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- + Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- + Prefetchable memory behind bridge Upper: 00-00 + Bus Number: 00 + Capabilities: [dc] HyperTransport: MSI Mapping + + 00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev a2) + Subsystem: Giga-byte Technology Unknown device [1458:0c11] + Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0 + + 00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2) + Subsystem: Giga-byte Technology Unknown device [1458:0c11] + Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Interrupt: pin A routed to IRQ 11 + Region 0: I/O ports at c000 [size=64] + Region 4: I/O ports at 1c00 [size=64] + Region 5: I/O ports at c800 [size=64] + Capabilities: [44] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + + 00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5] (rev a2) + Subsystem: Giga-byte Technology Unknown device [1458:0c11] + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + + 00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f1] (rev a2) (prog-if 10 [OHCI]) + Subsystem: Giga-byte Technology Unknown device [1458:5004] + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0 (750ns min, 250ns max) + Interrupt: pin A routed to IRQ 16 + Region 0: Memory at f5007000 (32-bit, non-prefetchable) [size=4K] + Capabilities: [44] Power Management version 2 + Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + + 00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f2] (rev a2) (prog-if 20 [EHCI]) + Subsystem: Giga-byte Technology Unknown device [1458:5004] + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0 (750ns min, 250ns max) + Interrupt: pin B routed to IRQ 17 + Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=256] + Capabilities: [44] Debug port + Capabilities: [80] Power Management version 2 + Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME+ + + 00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01 [Subtractive decode]) + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0 + Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 + I/O behind bridge: 0000b000-0000bfff + Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- + BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- + Capabilities: [b8] Subsystem: Giga-byte Technology Unknown device [1458:026f] + Capabilities: [8c] HyperTransport: MSI Mapping + + 00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio [10de:03f0] (rev a2) + Subsystem: Giga-byte Technology Unknown device [1458:a002] + Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0 (500ns min, 1250ns max) + Interrupt: pin B routed to IRQ 16 + Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16K] + Capabilities: [44] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- + Address: 0000000000000000 Data: 0000 + Masking: 00000000 Pending: 00000000 + Capabilities: [6c] HyperTransport: MSI Mapping + + 00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP]) + Subsystem: Giga-byte Technology Unknown device [1458:5002] + Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0 (750ns min, 250ns max) + Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] + Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] + Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] + Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] + Region 4: I/O ports at f000 [size=16] + Capabilities: [44] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + + 00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2) + Subsystem: Giga-byte Technology Unknown device [1458:e000] + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0 (250ns min, 5000ns max) + Interrupt: pin A routed to IRQ 18 + Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=4K] + Region 1: I/O ports at cc00 [size=8] + Capabilities: [44] Power Management version 2 + Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) + Status: D0 PME-Enable+ DSel=0 DScale=0 PME- + Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable- + Address: 0000000000000000 Data: 0000 + Masking: 00000000 Pending: 00000000 + Capabilities: [6c] HyperTransport: MSI Mapping + + 00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO]) + Subsystem: Giga-byte Technology Unknown device [1458:b002] + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0 (750ns min, 250ns max) + Interrupt: pin A routed to IRQ 19 + Region 0: I/O ports at 09f0 [size=8] + Region 1: I/O ports at 0bf0 [size=4] + Region 2: I/O ports at 0970 [size=8] + Region 3: I/O ports at 0b70 [size=4] + Region 4: I/O ports at e000 [size=16] + Region 5: Memory at f5005000 (32-bit, non-prefetchable) [size=4K] + Capabilities: [44] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- + Address: 0000000000000000 Data: 0000 + Capabilities: [cc] HyperTransport: MSI Mapping + + 00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2) (prog-if 00 [Normal decode]) + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0, Cache Line Size: 32 bytes + Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 + Memory behind bridge: f2000000-f4ffffff + Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff + Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- + BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- + Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000] + Capabilities: [48] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable- + Address: 0000000000000000 Data: 0000 + Capabilities: [60] HyperTransport: MSI Mapping + Capabilities: [80] Express Root Port (Slot+) IRQ 0 + Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag- + Device: Latency L0s <64ns, L1 <1us + Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ + Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ + Device: MaxPayload 128 bytes, MaxReadReq 512 bytes + Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 + Link: Latency L0s <512ns, L1 <4us + Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- + Link: Speed 2.5Gb/s, Width x8 + Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- + Slot: Number 1, PowerLimit 75.000000 + Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- + Slot: AttnInd Off, PwrInd On, Power- + Root: Correctable- Non-Fatal- Fatal- PME- + + 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Capabilities: [80] HyperTransport: Host or Secondary Interface + !!! Possibly incomplete decoding + Command: WarmRst+ DblEnd- + Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 + Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit + Revision ID: 1.02 + + 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + + 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + + 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] + Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Capabilities: [f0] #0f [0010] + + 02:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1) (prog-if 00 [VGA]) + Subsystem: ASUSTeK Computer Inc. Unknown device [1043:820b] + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- + Latency: 0 + Interrupt: pin A routed to IRQ 20 + Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M] + Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] + Region 3: Memory at f3000000 (64-bit, non-prefetchable) [size=16M] + [virtual] Expansion ROM at f4000000 [disabled] [size=128K] + Capabilities: [60] Power Management version 2 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- + Address: 0000000000000000 Data: 0000 + Capabilities: [78] Express Endpoint IRQ 0 + Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- + Device: Latency L0s <512ns, L1 <4us + Device: AtnBtn- AtnInd- PwrInd- + Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- + Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ + Device: MaxPayload 128 bytes, MaxReadReq 512 bytes + Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 + Link: Latency L0s <256ns, L1 <4us + Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch- + Link: Speed 2.5Gb/s, Width x8 -- Cd audio unreadable with Optiarc DVD RW https://bugs.launchpad.net/bugs/186664 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
