lspci-vvnn.log ...
00:00.0 Host bridge [0600]: nVidia Corporation nForce2 AGP (different version?)
[10de:01e0] (rev a2)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [40] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x1
Capabilities: [60] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Revision ID: 0.16
00:00.1 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 1
[10de:01eb] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:00.2 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 4
[10de:01ee] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:00.3 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 3
[10de:01ed] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:00.4 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 2
[10de:01ec] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:00.5 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 5
[10de:01ef] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:01.0 ISA bridge [0601]: nVidia Corporation nForce2 ISA Bridge [10de:0060]
(rev a4)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [48] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=1 UnitCnt=15 MastHost- DefDir-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC+ TXO-
<CRCErr=0
Link Config 0: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO+
<CRCErr=0
Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Revision ID: 0.00
00:01.1 SMBus [0c05]: nVidia Corporation nForce2 SMBus (MCP) [10de:0064] (rev
a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=32]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller
[10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0087000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller
[10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 16
Region 0: Memory at e0082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.2 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller
[10de:0068] (rev a4) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 17
Region 0: Memory at e0083000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:04.0 Ethernet controller [0200]: nVidia Corporation nForce2 Ethernet
Controller [10de:0066] (rev a1)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e0086000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at c400 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:05.0 Multimedia audio controller [0401]: nVidia Corporation nForce Audio
Processing Unit [10de:006b] (rev a2)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 3000ns max)
Interrupt: pin A routed to IRQ 4
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Multimedia audio controller [0401]: nVidia Corporation nForce2 AC97
Audio Controler (MCP) [10de:006a] (rev a1)
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b000 [size=256]
Region 1: I/O ports at b400 [size=128]
Region 2: Memory at e0080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.1 Modem [0703]: nVidia Corporation Unknown device [10de:0069] (rev a1)
(prog-if 00 [Generic])
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at b800 [size=256]
Region 1: I/O ports at bc00 [size=128]
Region 2: Memory at e0081000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 PCI bridge [0604]: nVidia Corporation nForce2 External PCI Bridge
[10de:006c] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: df000000-dfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:09.0 IDE interface [0101]: nVidia Corporation nForce2 IDE [10de:0065] (rev
a2) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 FireWire (IEEE 1394) [0c00]: nVidia Corporation nForce2 FireWire (IEEE
1394) Controller [10de:006e] (rev a3) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7960]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0084000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e0085000 (32-bit, non-prefetchable) [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:1e.0 PCI bridge [0604]: nVidia Corporation nForce2 AGP [10de:01e8] (rev a2)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: dd000000-deffffff
Prefetchable memory behind bridge: d4000000-dbffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
01:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8180L
802.11b MAC [10ec:8180] (rev 20)
Subsystem: Actiontec Electronics Inc Unknown device [1668:6109]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 9000 [size=256]
Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:00.0 VGA compatible controller [0300]: nVidia Corporation NV18 [GeForce4 MX
- nForce GPU] [10de:01f0] (rev a3) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:01f0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at d8000000 (32-bit, prefetchable) [size=512K]
[virtual] Expansion ROM at d8080000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
-------------------------------
dmesg.log ...
[ 0.000000] Linux version 2.6.24-5-generic ([EMAIL PROTECTED]) (gcc version
4.2.3 20080114 (prerelease) (Ubuntu 4.2.2-7ubuntu1)) #1 SMP Thu Jan 24 19:45:21
UTC 2008 (Ubuntu 2.6.24-5.8-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
[ 0.000000] BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 479MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 122864) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 122864
[ 0.000000] HighMem 122864 -> 122864
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 122864
[ 0.000000] On node 0 totalpages: 122864
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 927 pages used for memmap
[ 0.000000] Normal zone: 117841 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7F50 checksum 0
[ 0.000000] ACPI: RSDP 000F7F50, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 1DFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: FACP 1DFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: DSDT 1DFF30C0, 403E (r1 NVIDIA AWRDACPI 1000 MSFT
100000E)
[ 0.000000] ACPI: FACS 1DFF0000, 0040
[ 0.000000] ACPI: APIC 1DFF7100, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD
0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
1e000000:e2000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 121905
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet
splash --
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1830.027 MHz processor.
[ 51.827561] Console: colour VGA+ 80x25
[ 51.827565] console [tty0] enabled
[ 51.827926] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 51.828197] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 51.840697] Memory: 474924k/491456k available (2158k kernel code, 15864k
reserved, 992k data, 364k init, 0k highmem)
[ 51.840706] virtual kernel memory layout:
[ 51.840707] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 51.840708] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 51.840710] vmalloc : 0xde800000 - 0xff7fe000 ( 527 MB)
[ 51.840711] lowmem : 0xc0000000 - 0xddff0000 ( 479 MB)
[ 51.840712] .init : 0xc0419000 - 0xc0474000 ( 364 kB)
[ 51.840714] .data : 0xc031bb5d - 0xc0413dc4 ( 992 kB)
[ 51.840715] .text : 0xc0100000 - 0xc031bb5d (2158 kB)
[ 51.840718] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 51.840761] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1,
Nodes=1
[ 51.920706] Calibrating delay using timer specific routine.. 3663.00
BogoMIPS (lpj=7326019)
[ 51.920737] Security Framework initialized
[ 51.920744] SELinux: Disabled at boot.
[ 51.920764] AppArmor: AppArmor initialized
[ 51.920769] Failure registering capabilities with primary security module.
[ 51.920779] Mount-cache hash table entries: 512
[ 51.920914] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000
00000000 00000000 00000000 00000000 00000000
[ 51.920924] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 51.920927] CPU: L2 Cache: 512K (64 bytes/line)
[ 51.920931] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420
00000000 00000000 00000000 00000000
[ 51.920942] Compat vDSO mapped to ffffe000.
[ 51.920954] Checking 'hlt' instruction... OK.
[ 51.936917] SMP alternatives: switching to UP code
[ 51.938014] Freeing SMP alternatives: 11k freed
[ 51.938149] Early unpacking initramfs... done
[ 52.298610] ACPI: Core revision 20070126
[ 52.298704] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 52.301995] CPU0: AMD Athlon(tm) XP 2500+ stepping 00
[ 52.302020] Total of 1 processors activated (3663.00 BogoMIPS).
[ 52.302218] ENABLING IO-APIC IRQs
[ 52.302415] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 52.448276] Brought up 1 CPUs
[ 52.448308] CPU0 attaching sched-domain:
[ 52.448312] domain 0: span 01
[ 52.448314] groups: 01
[ 52.448514] net_namespace: 64 bytes
[ 52.448521] Booting paravirtualized kernel on bare hardware
[ 52.449034] Time: 4:04:04 Date: 02/09/08
[ 52.449099] NET: Registered protocol family 16
[ 52.449340] EISA bus registered
[ 52.449365] ACPI: bus type pci registered
[ 52.481504] PCI: PCI BIOS revision 2.10 entry at 0xfbb80, last bus=3
[ 52.481507] PCI: Using configuration type 1
[ 52.481509] Setting up standard PCI resources
[ 52.485830] ACPI: EC: Look up EC in DSDT
[ 52.490371] ACPI: Interpreter enabled
[ 52.490374] ACPI: (supports S0 S3 S4 S5)
[ 52.490389] ACPI: Using IOAPIC for interrupt routing
[ 52.498652] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 52.499620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 52.499803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 52.499949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 52.549723] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 52.549893] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 52.550061] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 52.550231] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 52.550398] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 52.550565] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 52.550731] ACPI: PCI Interrupt Link [LUBB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 52.550897] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 52.551064] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 52.551235] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 52.551409] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 52.551577] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 52.551746] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 52.551916] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 52.552084] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 52.552262] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 52.552407] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 52.552538] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 52.552668] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 52.552798] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 52.552927] ACPI: PCI Interrupt Link [APC5] (IRQs *16)
[ 52.553115] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 52.553313] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 52.553500] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 52.553687] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
[ 52.553872] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 52.554058] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0
[ 52.554189] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[ 52.554374] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 52.554559] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
[ 52.554745] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 52.554932] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 52.555080] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 52.555116] pnp: PnP ACPI init
[ 52.555125] ACPI: bus type pnp registered
[ 52.558875] pnp: PnP ACPI: found 13 devices
[ 52.558878] ACPI: ACPI bus type pnp unregistered
[ 52.558883] PnPBIOS: Disabled by ACPI PNP
[ 52.559160] PCI: Using ACPI for IRQ routing
[ 52.559164] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 52.620096] NET: Registered protocol family 8
[ 52.620099] NET: Registered protocol family 20
[ 52.620186] AppArmor: AppArmor Filesystem Enabled
[ 52.624058] Time: tsc clocksource has been installed.
[ 52.632091] system 00:00: ioport range 0x4000-0x407f has been reserved
[ 52.632095] system 00:00: ioport range 0x4080-0x40ff has been reserved
[ 52.632098] system 00:00: ioport range 0x4400-0x447f has been reserved
[ 52.632101] system 00:00: ioport range 0x4480-0x44ff has been reserved
[ 52.632104] system 00:00: ioport range 0x4200-0x427f has been reserved
[ 52.632107] system 00:00: ioport range 0x4280-0x42ff has been reserved
[ 52.632113] system 00:01: ioport range 0x5000-0x503f has been reserved
[ 52.632116] system 00:01: ioport range 0x5040-0x507f has been reserved
[ 52.632124] system 00:02: iomem range 0xd1800-0xd3fff has been reserved
[ 52.632128] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
[ 52.632131] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
[ 52.632134] system 00:02: iomem range 0xfc000-0xfffff could not be reserved
[ 52.632137] system 00:02: iomem range 0x1dff0000-0x1dffffff could not be
reserved
[ 52.632140] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved
[ 52.632143] system 00:02: iomem range 0x0-0x9ffff could not be reserved
[ 52.632146] system 00:02: iomem range 0x100000-0x1dfeffff could not be
reserved
[ 52.632150] system 00:02: iomem range 0xfec00000-0xfec00fff has been reserved
[ 52.632153] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
[ 52.632159] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 52.632162] system 00:04: ioport range 0x800-0x87f has been reserved
[ 52.662646] PCI: Bridge: 0000:00:08.0
[ 52.662650] IO window: 9000-9fff
[ 52.662656] MEM window: df000000-dfffffff
[ 52.662659] PREFETCH window: disabled.
[ 52.662667] PCI: Bridge: 0000:00:1e.0
[ 52.662669] IO window: disabled.
[ 52.662673] MEM window: dd000000-deffffff
[ 52.662676] PREFETCH window: d4000000-dbffffff
[ 52.662687] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 52.662704] NET: Registered protocol family 2
[ 52.700095] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 52.700351] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 52.700549] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 52.700740] TCP: Hash tables configured (established 16384 bind 16384)
[ 52.700743] TCP reno registered
[ 52.712112] checking if image is initramfs... it is
[ 53.163565] Switched to high resolution mode on CPU 0
[ 53.395277] Freeing initrd memory: 7521k freed
[ 53.396081] audit: initializing netlink socket (disabled)
[ 53.396100] audit(1202529844.452:1): initialized
[ 53.398332] VFS: Disk quotas dquot_6.5.1
[ 53.398414] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 53.398567] io scheduler noop registered
[ 53.398570] io scheduler anticipatory registered
[ 53.398572] io scheduler deadline registered
[ 53.398584] io scheduler cfq registered (default)
[ 53.398632] Boot video device is 0000:03:00.0
[ 53.398953] isapnp: Scanning for PnP cards...
[ 53.752955] isapnp: No Plug & Play device found
[ 53.785741] Real Time Clock Driver v1.12ac
[ 53.785870] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 53.786824] ACPI: PCI Interrupt Link [APCK] enabled at IRQ 22
[ 53.786884] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [APCK] -> GSI 22
(level, high) -> IRQ 16
[ 53.786894] ACPI: PCI interrupt for device 0000:00:06.1 disabled
[ 53.787847] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 53.787925] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 53.788040] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 53.791027] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 53.791032] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 53.802889] mice: PS/2 mouse device common for all mice
[ 53.803020] EISA: Probing bus 0 at eisa.0
[ 53.803042] Cannot allocate resource for EISA slot 4
[ 53.803045] Cannot allocate resource for EISA slot 5
[ 53.803061] EISA: Detected 0 cards.
[ 53.803064] cpuidle: using governor ladder
[ 53.803066] cpuidle: using governor menu
[ 53.803224] NET: Registered protocol family 1
[ 53.803253] Using IPI No-Shortcut mode
[ 53.803292] registered taskstats version 1
[ 53.803411] Magic number: 12:583:59
[ 53.804033] Freeing unused kernel memory: 364k freed
[ 53.830805] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 55.040550] fuse init (API version 7.9)
[ 55.047005] ACPI: Fan [FAN] (on)
[ 55.059209] ACPI: Thermal Zone [THRM] (-65 C)
[ 56.062134] usbcore: registered new interface driver usbfs
[ 56.062164] usbcore: registered new interface driver hub
[ 56.076543] forcedeth: Reverse Engineered nForce ethernet driver. Version
0.61.
[ 56.076916] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 56.076926] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 21
(level, high) -> IRQ 17
[ 56.076934] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 56.084494] usbcore: registered new device driver usb
[ 56.098770] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 56.156426] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 56.156434] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 56.384454] FDC 0 is a post-1991 82077
[ 56.596325] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr
00:0c:76:a4:87:14
[ 56.596331] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[ 56.596821] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 56.596830] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20
(level, high) -> IRQ 18
[ 56.596845] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 56.596850] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 56.597162] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[ 56.597183] ohci_hcd 0000:00:02.0: irq 18, io mem 0xe0087000
[ 56.654006] usb usb1: configuration #1 chosen from 1 choice
[ 56.654036] hub 1-0:1.0: USB hub found
[ 56.654047] hub 1-0:1.0: 3 ports detected
[ 56.756212] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
[ 56.756219] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22
(level, high) -> IRQ 16
[ 56.756235] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 56.756239] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 56.756273] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 2
[ 56.756294] ohci_hcd 0000:00:02.1: irq 16, io mem 0xe0082000
[ 56.813792] usb usb2: configuration #1 chosen from 1 choice
[ 56.813822] hub 2-0:1.0: USB hub found
[ 56.813833] hub 2-0:1.0: 3 ports detected
[ 56.916116] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 56.916122] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21
(level, high) -> IRQ 17
[ 56.916135] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 56.916140] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 56.916170] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus
number 3
[ 56.916205] ehci_hcd 0000:00:02.2: debug port 1
[ 56.916210] PCI: cache line size of 64 is not supported by device
0000:00:02.2
[ 56.916223] ehci_hcd 0000:00:02.2: irq 17, io mem 0xe0083000
[ 56.927585] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 56.927738] usb usb3: configuration #1 chosen from 1 choice
[ 56.927767] hub 3-0:1.0: USB hub found
[ 56.927776] hub 3-0:1.0: 6 ports detected
[ 57.031650] NFORCE2: IDE controller (0x10de:0x0065 rev 0xa2) at PCI slot
0000:00:09.0
[ 57.031683] NFORCE2: not 100% native mode: will probe irqs later
[ 57.031688] NFORCE2: BIOS didn't set cable bits correctly. Enabling
workaround.
[ 57.031694] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 57.031702] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA,
hdb:DMA
[ 57.031715] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA,
hdd:DMA
[ 57.031724] Probing IDE interface ide0...
[ 57.618815] usb 2-3: new full speed USB device using ohci_hcd and address 2
[ 57.833721] usb 2-3: configuration #1 chosen from 1 choice
[ 57.850382] usbcore: registered new interface driver libusual
[ 57.862213] SCSI subsystem initialized
[ 57.864797] Initializing USB Mass Storage driver...
[ 57.865928] scsi0 : SCSI emulation for USB Mass Storage devices
[ 57.866528] usbcore: registered new interface driver usb-storage
[ 57.866533] USB Mass Storage support registered.
[ 57.866660] usb-storage: device found at 2
[ 57.866662] usb-storage: waiting for device to settle before scanning
[ 57.990545] hda: WDC WD800BB-00CAA1, ATA DISK drive
[ 57.990581] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 57.991657] hda: UDMA/100 mode selected
[ 57.992769] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 58.000086] Probing IDE interface ide1...
[ 59.405062] hdc: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive
[ 59.405103] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 59.405416] hdc: UDMA/33 mode selected
[ 59.405688] ide1 at 0x170-0x177,0x376 on irq 15
[ 59.415384] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20
[ 59.415391] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 20
(level, high) -> IRQ 18
[ 59.415399] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 59.467178] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]
MMIO=[e0084000-e00847ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 59.476114] libata version 3.00 loaded.
[ 59.498881] hda: max request size: 128KiB
[ 59.500982] hda: 156301488 sectors (80026 MB) w/2048KiB Cache,
CHS=65535/16/63
[ 59.500988] hda: cache flushes not supported
[ 59.501027] hda: hda1 hda2 < hda5 >
[ 59.541675] hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 59.541686] Uniform CD-ROM driver Revision: 3.20
[ 60.236111] kjournald starting. Commit interval 5 seconds
[ 60.236132] EXT3-fs: mounted filesystem with ordered data mode.
[ 60.586181] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[ 60.855535] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000504a5a]
[ 61.402863] kjournald starting. Commit interval 5 seconds
[ 61.402876] EXT3-fs: mounted filesystem with ordered data mode.
[ 62.786802] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 62.832041] ISO 9660 Extensions: RRIP_1991A
[ 62.908429] usb-storage: device scan complete
[ 63.005331] scsi scan: INQUIRY result too short (5), using 36
[ 63.005337] scsi 0:0:0:0: Direct-Access OEI-USB CompactFlash 1.02
PQ: 0 ANSI: 0
[ 63.100522] Registering unionfs 1.4
[ 63.100527] unionfs: debugging is not enabled
[ 63.110742] loop: module loaded
[ 63.445117] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 63.628700] scsi scan: INQUIRY result too short (5), using 36
[ 63.628709] scsi 0:0:0:1: Direct-Access OEI-USB SM/MS/SD 1.02
PQ: 0 ANSI: 0
[ 63.638552] Driver 'sd' needs updating - please use bus_type methods
[ 63.648720] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 63.659669] sd 0:0:0:1: [sdb] Attached SCSI removable disk
[ 63.668439] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 63.668490] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 120.121278] Linux agpgart interface v0.102
[ 120.580815] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 120.616827] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 120.616858] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
[ 120.772644] agpgart: Detected NVIDIA nForce2 chipset
[ 120.778493] agpgart: AGP aperture is 64M @ 0xd0000000
[ 121.004468] input: Power Button (FF) as /devices/virtual/input/input2
[ 121.016317] ACPI: Power Button (FF) [PWRF]
[ 121.016423] input: Power Button (CM) as /devices/virtual/input/input3
[ 121.032272] ACPI: Power Button (CM) [PWRB]
[ 121.140276] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 121.469438] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 123.683596] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[ 123.683603] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22
(level, high) -> IRQ 16
[ 123.683631] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 124.000403] input: GenPS/2 Genius Mouse as
/devices/platform/i8042/serio1/input/input5
[ 124.256904] intel8x0_measure_ac97_clock: measured 55341 usecs
[ 124.256909] intel8x0: clocking to 47435
[ 124.633971] parport_pc 00:0a: reported by Plug and Play ACPI
[ 124.634004] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 127.841423] Adding 1413680k swap on /dev/hda5. Priority:-1 extents:1
across:1413680k
[ 129.331526] No dock devices found.
[ 129.530011] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 135.078067] NET: Registered protocol family 10
[ 135.078474] lo: Disabled Privacy Extensions
[ 135.231482] lp0: using parport0 (interrupt-driven).
[ 135.284739] ppdev: user-space parallel port driver
[ 141.672180] eth0: no link during initialization.
[ 141.672576] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 142.054275] Bluetooth: Core ver 2.11
[ 142.054365] NET: Registered protocol family 31
[ 142.054368] Bluetooth: HCI device and connection manager initialized
[ 142.054373] Bluetooth: HCI socket layer initialized
[ 142.114194] Bluetooth: L2CAP ver 2.9
[ 142.114200] Bluetooth: L2CAP socket layer initialized
[ 142.287503] Bluetooth: RFCOMM socket layer initialized
[ 142.287524] Bluetooth: RFCOMM TTY layer initialized
[ 142.287526] Bluetooth: RFCOMM ver 1.8
--------------------------
iwconfig.log ... 0 length ... however, instead of directing output to
the log file, the following lines appear on screen
lo no wireless extensions
eth0 no wireless extensions
--
Wireless works in 6.06, not in 7.10
https://bugs.launchpad.net/bugs/188390
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
