Maybe a bit more information would be helpful. Not sure id this is a K3b error or a CDrecord error. Cannot burn iso images to any medium CD-R or CD-RW on either of my 2 burner drives and have used multiple iso images. Here is the last output from k3b when erroring on verification. Saved full log and added as attachment.
System ----------------------- K3b Version: 1.0.3 KDE Version: 3.5.8 QT Version: 3.3.7 Kernel: 2.6.22-14-generic Devices ----------------------- IOMEGA CDRW64896INT-B 6OS2 (/dev/scd1, ) [CD-R, CD-RW, CD-ROM] [CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R] HL-DT-ST DVDRAM GSA-H10A JL03 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] K3bDataTrackReader ----------------------- reading sectors 0 to 346644 with sector size 2048. Length: 346645 sectors, 709928960 bytes. using buffer size of 64 blocks. Problem while reading. Retrying from sector 2112. Read error in sector 2126. Read a total of 2112 sectors (4325376 bytes) Used versions ----------------------- cdrecord: 1.1.6 cdrecord ----------------------- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. scsidev: '/dev/scd1' devname: '/dev/scd1' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.6 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'IOMEGA ' Identification : 'CDRW64896INT-B ' Revision : '6OS2' Device seems to be: Generic mmc CD-RW. Current: 0x000A (CD-RW) Profile: 0x000A (CD-RW) (current) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1422080 = 1388 KB FIFO size : 12582912 = 12288 KB Speed set to 2112 KB/s Track 01: data 677 MB Total size: 777 MB (77:01.93) = 346645 sectors Lout start: 777 MB (77:03/70) = 346645 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 3 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11635 (97:26/65) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 3 A1 values: 24 1A BC A2 values: 26 B2 26 Disk type: Phase change Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 13204 Forcespeed is OFF. Starting to write CD/DVD at speed 12.0 in real SAO mode for single session. ** Attachment added: "isoerror.txt" http://launchpadlibrarian.net/11852934/isoerror.txt -- image doesnt burn https://bugs.launchpad.net/bugs/135283 You received this bug notification because you are a member of Kubuntu Team, which is a bug contact for k3b in ubuntu. -- kubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
