I have this same problem on a Hardy laptop running:
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751M Gigabit
Ethernet PCI Express (rev 11)
Subsystem: IBM Unknown device 0577
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at a0100000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
Enable-
Capabilities: [d0] Express Endpoint IRQ 0
Using:
[EMAIL PROTECTED]:~$ sudo ethtool -i eth0
driver: tg3
version: 3.86
firmware-version: 5751m-v3.40a
bus-info: 0000:02:00.0
with:
[EMAIL PROTECTED]:~$ sudo ethtool -k eth0
Offload parameters for eth0:
rx-checksumming: on
tx-checksumming: on
scatter-gather: on
tcp segmentation offload: on
udp fragmentation offload: off
generic segmentation offload: off
The problem only exists when i'm using my broadcom interface, when i use
the built in wireless interface everything seems okay. I'll try turning
off some of the offloading and reporting back if it worked.
--
Large file transfer gives error: Corrupted MAC on input
https://bugs.launchpad.net/bugs/60764
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
