Parthan a écrit :
> Gilles, can you check the link given by Jacob and provide us some
> additional information? Just confirming is not enough, we need as much
> information as you can provide us. Thanks in advance.
>
>
Yes I do, see attachments. I also report a bug with my sound card (SB
live platinum) : bug 194824. I think the two bugs are not the same, but
I'm dont sure.
(I'm afraid of my bad english). Thanks.
00:00.0 Host bridge [0600]: nVidia Corporation nForce2 IGP2 [10de:01e0] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [40] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x4
Capabilities: [60] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Revision ID: 0.16
00:00.1 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 1
[10de:01eb] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:00.2 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 4
[10de:01ee] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:00.3 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 3
[10de:01ed] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:00.4 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 2
[10de:01ec] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:00.5 RAM memory [0500]: nVidia Corporation nForce2 Memory Controller 5
[10de:01ef] (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80ac]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:01.0 ISA bridge [0601]: nVidia Corporation nForce2 ISA Bridge [10de:0060]
(rev a4)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:80ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [48] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=1 UnitCnt=15 MastHost- DefDir-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC+ TXO-
<CRCErr=0
Link Config 0: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO+
<CRCErr=0
Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
Revision ID: 0.00
00:01.1 SMBus [0c05]: nVidia Corporation nForce2 SMBus (MCP) [10de:0064] (rev
a2)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:0c11]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=32]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller
[10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e1001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller
[10de:0067] (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 19
Region 0: Memory at e1002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.2 USB Controller [0c03]: nVidia Corporation nForce2 USB Controller
[10de:0068] (rev a4) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard [1043:0c11]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 16
Region 0: Memory at e1003000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:04.0 Ethernet controller [0200]: nVidia Corporation nForce2 Ethernet
Controller [10de:0066] (rev a1)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard onboard nForce2
Ethernet [1043:80a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e1004000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ec00 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:08.0 PCI bridge [0604]: nVidia Corporation nForce2 External PCI Bridge
[10de:006c] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: df000000-e0ffffff
Prefetchable memory behind bridge: 40000000-400fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:09.0 IDE interface [0101]: nVidia Corporation nForce2 IDE [10de:0065] (rev
a2) (prog-if 8a [Master SecP PriP])
Subsystem: Unknown device [f043:0c11]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.0 PCI bridge [0604]: nVidia Corporation nForce2 AGP [10de:01e8] (rev c1)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: dd000000-deffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
01:04.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet
Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at c000 [size=256]
[virtual] Expansion ROM at 40000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
01:06.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1
[1102:0002] (rev 07)
Subsystem: Creative Labs CT4760 SBLive! [1102:8040]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at c400 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:06.1 Input device controller [0980]: Creative Labs SB Live! Game Port
[1102:7002] (rev 07)
Subsystem: Creative Labs Gameport Joystick [1102:0020]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at c800 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:08.0 SCSI storage controller [0100]: Adaptec AHA-7850 [9004:5078] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at cc00 [disabled] [size=256]
Region 1: Memory at e0004000 (32-bit, non-prefetchable) [size=4K]
03:00.0 VGA compatible controller [0300]: nVidia Corporation NV34 [GeForce FX
5200] [10de:0322] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:9980]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at de000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Linux bonsecours1 2.6.24-10-generic #1 SMP Fri Feb 22 19:08:18 UTC 2008
i686 GNU/Linux
name=root&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content=
!!################################
!!ALSA Information Script v 0.4.41
!!################################
!!Script ran on: Sat Mar 1 22:12:58 CET 2008
!!Linux Distribution
!!------------------
Ubuntu hardy (development branch) \n \l DISTRIB_ID=Ubuntu
DISTRIB_DESCRIPTION="Ubuntu hardy (development branch)"
!!Kernel Information
!!------------------
Kernel release: 2.6.24-10-generic
Operating System: GNU/Linux
Architecture: i686
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.16
Library version:
Utilities version: 1.0.15
!!Loaded ALSA modules
!!-------------------
snd_emu10k1
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Live ]: EMU10K1 - SBLive! Platinum [CT4760P]
SBLive! Platinum [CT4760P] (rev.7, serial:0x80401102) at
0xc400, irq 21
!!PCI Soundcards installed in the system
!!--------------------------------------
01:06.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
07)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------
01:06.0 0401: 1102:0002 (rev 07)
Subsystem: 1102:8040
!!Modprobe options (Sound related)
!!--------------------------------
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-usb-audio: index=-2
snd-usb-usx2y: index=-2
snd-usb-caiaq: index=-2
snd-cmipci: mpu_port=0x330 fm_port=0x388
!!Loaded sound module options
!!--------------------------
!!Module: snd_emu10k1
enable : Y,Y,Y,Y,Y,Y,Y,Y
enable_ir : N,N,N,N,N,N,N,N
extin : 0,0,0,0,0,0,0,0
extout : 0,0,0,0,0,0,0,0
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
index : -1,-1,-1,-1,-1,-1,-1,-1
max_buffer_size : 128,128,128,128,128,128,128,128
max_synth_voices : 64,64,64,64,64,64,64,64
seq_ports : 4,4,4,4,4,4,4,4
subsystem : 0,0,0,0,0,0,0,0
!!AC97 Codec information
!!---------------------------
--startcollapse--
0-0/0: TriTech TR28602
PCI Subsys Vendor: 0x0000
PCI Subsys Device: 0x0000
Capabilities :
DAC resolution : 16-bit
ADC resolution : 16-bit
3D enhancement : No 3D Stereo Enhancement
Current setup
Mic gain : +20dB [+20dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
0:00 = 0000
0:02 = 0f0f
0:04 = 0000
0:06 = 801f
0:08 = 0000
0:0a = 0006
0:0c = 0008
0:0e = 004f
0:10 = 1313
0:12 = 0202
0:14 = 0909
0:16 = 1212
0:18 = 1010
0:1a = 0000
0:1c = 0f0f
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 800f
0:28 = 0000
0:2a = 0000
0:2c = 0000
0:2e = 0000
0:30 = 0000
0:32 = 0000
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 0000
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0000
0:66 = 0000
0:68 = 0000
0:6a = 0000
0:6c = 0000
0:6e = 0000
0:70 = 0000
0:72 = 0000
0:74 = 0000
0:76 = 0000
0:78 = 0000
0:7a = 0000
0:7c = 5452
0:7e = 4123
--endcollapse--
--
system sounds not working
https://bugs.launchpad.net/bugs/194578
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
