Public bug reported:
Hi,
I have some serious problems with ACPI on HP Compaq NX6110. Short summary:
Hibernate: works
Suspend to RAM: suspend is sort of OK, but wake up is totally broken
Lid button: totally mess
As I said, hibernate is working, but it's probably not part of ACPI and it's
the least useful option on laptops anyway.
When I try to use Suspend from guidance-power-manager menu nothing happens
(except that guidance is locking my session, but it has nothing to do with
ACPI). I thought it's hal/dbus fault and I installed hibernate package and try
to use my working hibernate configuration from feisty. When I run "sudo
hibernate" suspend seems to works. The disk and screen are turning off and I
get usual leds blinking meaning that the machine is suspended. But when I hit
Power button it doesn't wake up - backlight never lights up, leds are turned
off etc. But after repeatedly pressing power button somethings happen (hdd and
other leds are blinking, WiFi led lights up) and then I get reboot.
And about Lid button: it works, but really strange. After I press Lid button
everything looks fine - guidance give me proper notice ("laptop lid is closed,
blanking screen now") and my display is turning off. Then, when I open lid it
lights up, but after a minute guidance detect closed lid again and my display
is turning off again. The only way to stop this behavior is "sudo
/etc/init.d/acpid stop" - stopping guidance/dbus/hal doesn't help. And there's
also something wrong with the display, because when I try to watch movie in
mplayer using xv output while using AC adapter, backlight level is changing
automatically to level that is used while on battery only and stays that way
until I press acpi buttons for changing backlight. Definitely weird. And it
gets better: lid butto seems to work fine when I'm on battery only.
For the record: everything worked fine on feisty. I tried Alpha 3, 4, 5
and up to date hardy, but it's still broken.
Additional informations:
$ uname -a
Linux kubuntu 2.6.24-11-386 #1 Fri Feb 29 21:28:00 UTC 2008 i686 GNU/Linux
$ lspci -vv
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
Processor to DRAM Controller (rev 03)
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0400000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 7000 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at d0480000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express
Graphics Controller (rev 03)
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at 2000 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 2020 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 16
Region 4: I/O ports at 2040 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 20
Region 4: I/O ports at 2060 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0580000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
(prog-if01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort-<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
Memory behind bridge: d0000000-d03fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) AC'97 Audio Controller (rev 03)
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 2100 [size=256]
Region 1: I/O ports at 2200 [size=64]
Region 2: Memory at d0581000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at d0582000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97
Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2500 [size=128]
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge
(rev 03)
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 2580 [size=16]
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 03)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 1200 [size=32]
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network
Connection (rev 05)
Subsystem: Hewlett-Packard Company Compaq nw8240/nx8220
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 34000000-37fff000
I/O window 0: 00001400-000014ff
I/O window 1: 00001800-000018ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host
Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at d0002000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0004000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Subsystem: Hewlett-Packard Company NX6110/NC6120
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort-<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d000e000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
** Affects: ubuntu
Importance: Undecided
Status: New
--
[hardy] [regression] acpi is totally broken on hp compaq nx6110/intel i915
https://bugs.launchpad.net/bugs/198141
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
