*** This bug is a duplicate of bug 193075 ***
https://bugs.launchpad.net/bugs/193075
[EMAIL PROTECTED]:~# dmesg
[ 0.000000] Linux version 2.6.24-8-generic ([EMAIL PROTECTED]) (gcc version
4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:40:45 UTC 2008 (Ubuntu
2.6.24-8.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5010
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6BE0 checksum 0
[ 0.000000] ACPI: RSDP 000F6BE0, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: DSDT 3FFF30C0, 3B65 (r1 INTELR AWRDACPI 1000 MSFT
100000E)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: APIC 3FFF6C40, 006C (r1 IntelR AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] Processor #2 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] Processor #3 15:2 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 260081
[ 0.000000] Kernel command line:
root=UUID=fe67e460-1472-49ca-917e-105ca03e668e ro splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2180.819 MHz processor.
[ 39.103448] Console: colour VGA+ 80x25
[ 39.103454] console [tty0] enabled
[ 39.106908] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 39.107842] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 39.154043] Memory: 1027392k/1048512k available (2161k kernel code, 20420k
reserved, 997k data, 364k init, 131008k highmem)
[ 39.154125] virtual kernel memory layout:
[ 39.154126] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 39.154128] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 39.154129] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 39.154130] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 39.154132] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 39.154133] .data : 0xc031c5ed - 0xc0415dc4 ( 997 kB)
[ 39.154134] .text : 0xc0100000 - 0xc031c5ed (2161 kB)
[ 39.154528] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 39.154690] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4,
Nodes=1
[ 39.234689] Calibrating delay using timer specific routine.. 4366.11
BogoMIPS (lpj=8732224)
[ 39.234826] Security Framework initialized
[ 39.234887] SELinux: Disabled at boot.
[ 39.234955] AppArmor: AppArmor initialized
[ 39.235008] Failure registering capabilities with primary security module.
[ 39.235071] Mount-cache hash table entries: 512
[ 39.235330] CPU: After generic identify, caps: 3febfbff 00000000 00000000
00000000 00000000 00000000 00000000 00000000
[ 39.235347] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 39.235436] CPU: L2 cache: 512K
[ 39.235485] CPU: Physical Processor ID: 0
[ 39.235535] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080
00000000 00000000 00000000 00000000
[ 39.235551] Compat vDSO mapped to ffffe000.
[ 39.235619] Checking 'hlt' instruction... OK.
[ 39.251275] SMP alternatives: switching to UP code
[ 39.253639] Early unpacking initramfs... done
[ 39.659093] ACPI: Core revision 20070126
[ 39.659206] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 39.727777] CPU0: Intel(R) XEON(TM) CPU 2.20GHz stepping 04
[ 39.727937] SMP alternatives: switching to SMP code
[ 39.728896] Booting processor 1/1 eip 3000
[ 39.738973] Initializing CPU#1
[ 39.818024] Calibrating delay using timer specific routine.. 4361.94
BogoMIPS (lpj=8723890)
[ 39.818035] CPU: After generic identify, caps: 3febfbff 00000000 00000000
00000000 00000000 00000000 00000000 00000000
[ 39.818048] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 39.818051] CPU: L2 cache: 512K
[ 39.818053] CPU: Physical Processor ID: 3
[ 39.818056] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080
00000000 00000000 00000000 00000000
[ 39.818401] CPU1: Intel(R) XEON(TM) CPU 2.20GHz stepping 04
[ 39.818789] SMP alternatives: switching to SMP code
[ 39.819487] Booting processor 2/2 eip 3000
[ 39.829679] Initializing CPU#2
[ 39.909920] Calibrating delay using timer specific routine.. 4361.87
BogoMIPS (lpj=8723752)
[ 39.909932] CPU: After generic identify, caps: 3febfbff 00000000 00000000
00000000 00000000 00000000 00000000 00000000
[ 39.909946] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 39.909949] CPU: L2 cache: 512K
[ 39.909952] CPU: Physical Processor ID: 0
[ 39.909955] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080
00000000 00000000 00000000 00000000
[ 39.910269] CPU2: Intel(R) XEON(TM) CPU 2.20GHz stepping 04
[ 39.910700] SMP alternatives: switching to SMP code
[ 39.911719] Booting processor 3/3 eip 3000
[ 39.921799] Initializing CPU#3
[ 40.001816] Calibrating delay using timer specific routine.. 4361.99
BogoMIPS (lpj=8723993)
[ 40.001829] CPU: After generic identify, caps: 3febfbff 00000000 00000000
00000000 00000000 00000000 00000000 00000000
[ 40.001843] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 40.001847] CPU: L2 cache: 512K
[ 40.001851] CPU: Physical Processor ID: 3
[ 40.001854] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080
00000000 00000000 00000000 00000000
[ 40.002128] CPU3: Intel(R) XEON(TM) CPU 2.20GHz stepping 04
[ 40.002556] Total of 4 processors activated (17451.92 BogoMIPS).
[ 40.002760] ENABLING IO-APIC IRQs
[ 40.003006] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 40.149849] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 40.170025] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 40.190180] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 40.210267] Brought up 4 CPUs
[ 40.210355] CPU0 attaching sched-domain:
[ 40.210360] domain 0: span 05
[ 40.210363] groups: 01 04
[ 40.210368] domain 1: span 0f
[ 40.210371] groups: 05 0a
[ 40.210376] CPU1 attaching sched-domain:
[ 40.210378] domain 0: span 0a
[ 40.210381] groups: 02 08
[ 40.210385] domain 1: span 0f
[ 40.210388] groups: 0a 05
[ 40.210392] CPU2 attaching sched-domain:
[ 40.210395] domain 0: span 05
[ 40.210397] groups: 04 01
[ 40.210402] domain 1: span 0f
[ 40.210405] groups: 05 0a
[ 40.210409] CPU3 attaching sched-domain:
[ 40.210411] domain 0: span 0a
[ 40.210414] groups: 08 02
[ 40.210419] domain 1: span 0f
[ 40.210421] groups: 0a 05
[ 40.210986] net_namespace: 64 bytes
[ 40.211047] Booting paravirtualized kernel on bare hardware
[ 40.211874] Time: 14:13:22 Date: 02/22/08
[ 40.212025] NET: Registered protocol family 16
[ 40.212465] EISA bus registered
[ 40.212521] ACPI: bus type pci registered
[ 40.215742] PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=4
[ 40.215797] PCI: Using configuration type 1
[ 40.215846] Setting up standard PCI resources
[ 40.223990] ACPI: EC: Look up EC in DSDT
[ 40.230938] ACPI: Interpreter enabled
[ 40.230994] ACPI: (supports S0 S1 S3 S4 S5)
[ 40.231237] ACPI: Using IOAPIC for interrupt routing
[ 40.238105] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 40.238461] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 40.238516] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[ 40.240144] PCI: Transparent bridge - 0000:00:1e.0
[ 40.240228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 40.240412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 40.240625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUBA.HUBB._PRT]
[ 40.258814] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 40.259467] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 40.260114] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 40.260760] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 40.261408] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 40.262141] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 40.262859] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 40.263505] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 40.264235] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 40.264346] pnp: PnP ACPI init
[ 40.264405] ACPI: bus type pnp registered
[ 40.268770] pnp: PnP ACPI: found 15 devices
[ 40.268825] ACPI: ACPI bus type pnp unregistered
[ 40.268880] PnPBIOS: Disabled by ACPI PNP
[ 40.269399] PCI: Using ACPI for IRQ routing
[ 40.269453] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 40.333465] NET: Registered protocol family 8
[ 40.333518] NET: Registered protocol family 20
[ 40.333690] AppArmor: AppArmor Filesystem Enabled
[ 40.337447] Time: tsc clocksource has been installed.
[ 40.349507] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 40.349562] system 00:00: iomem range 0xd1000-0xd3fff has been reserved
[ 40.349615] system 00:00: iomem range 0xf0000-0xfbfff could not be reserved
[ 40.349669] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 40.349723] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be
reserved
[ 40.349785] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 40.349839] system 00:00: iomem range 0x100000-0x3ffeffff could not be
reserved
[ 40.349900] system 00:00: iomem range 0xfec00000-0xfecfffff could not be
reserved
[ 40.349965] system 00:00: iomem range 0xfee00000-0xfee00fff could not be
reserved
[ 40.350028] system 00:00: iomem range 0xffb00000-0xffb7ffff could not be
reserved
[ 40.350091] system 00:00: iomem range 0xfff00000-0xffffffff could not be
reserved
[ 40.350154] system 00:00: iomem range 0xe0000-0xeffff has been reserved
[ 40.350220] system 00:03: ioport range 0x400-0x4bf could not be reserved
[ 40.350281] system 00:04: ioport range 0xb78-0xb7b has been reserved
[ 40.350334] system 00:04: ioport range 0xf78-0xf7b has been reserved
[ 40.350388] system 00:04: ioport range 0xa78-0xa7b has been reserved
[ 40.350441] system 00:04: ioport range 0xe78-0xe7b has been reserved
[ 40.351336] system 00:04: ioport range 0xbbc-0xbbf has been reserved
[ 40.351389] system 00:04: ioport range 0xfbc-0xfbf has been reserved
[ 40.351443] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 40.351496] system 00:04: ioport range 0x294-0x297 has been reserved
[ 40.382379] PCI: Bridge: 0000:00:01.0
[ 40.382431] IO window: disabled.
[ 40.382483] MEM window: ea000000-ecffffff
[ 40.382535] PREFETCH window: e8000000-e9ffffff
[ 40.382592] PCI: Bridge: 0000:02:1f.0
[ 40.382642] IO window: a000-bfff
[ 40.382695] MEM window: ed000000-eeffffff
[ 40.382747] PREFETCH window: 50000000-500fffff
[ 40.382801] PCI: Bridge: 0000:00:02.0
[ 40.382851] IO window: a000-bfff
[ 40.382902] MEM window: ed000000-eeffffff
[ 40.382954] PREFETCH window: 50000000-500fffff
[ 40.383010] PCI: Bridge: 0000:00:1e.0
[ 40.383060] IO window: c000-cfff
[ 40.383112] MEM window: ef000000-f0ffffff
[ 40.383164] PREFETCH window: f1000000-f10fffff
[ 40.383237] PCI: Setting latency timer of device 0000:02:1f.0 to 64
[ 40.383248] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 40.383267] NET: Registered protocol family 2
[ 40.421469] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 40.422018] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 40.423284] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 40.424111] TCP: Hash tables configured (established 131072 bind 65536)
[ 40.424172] TCP reno registered
[ 40.433632] checking if image is initramfs... it is
[ 40.881112] Switched to high resolution mode on CPU 1
[ 40.881308] Switched to high resolution mode on CPU 2
[ 40.881471] Switched to high resolution mode on CPU 3
[ 40.884812] Switched to high resolution mode on CPU 0
[ 41.235951] Freeing initrd memory: 7208k freed
[ 41.236975] audit: initializing netlink socket (disabled)
[ 41.237048] audit(1203689602.868:1): initialized
[ 41.237432] highmem bounce pool size: 64 pages
[ 41.241054] VFS: Disk quotas dquot_6.5.1
[ 41.241245] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 41.241530] io scheduler noop registered
[ 41.241583] io scheduler anticipatory registered
[ 41.241634] io scheduler deadline registered
[ 41.241701] io scheduler cfq registered (default)
[ 41.241808] Boot video device is 0000:01:00.0
[ 41.241826] PCI: Firmware left 0000:04:04.0 e100 interrupts enabled,
disabling
[ 41.242460] isapnp: Scanning for PnP cards...
[ 41.596008] isapnp: No Plug & Play device found
[ 41.649058] Real Time Clock Driver v1.12ac
[ 41.649286] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 41.649496] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 41.649763] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 41.650850] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 41.651377] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 41.653002] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 41.653191] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 41.653453] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 41.655939] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 41.655997] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 41.687926] mice: PS/2 mouse device common for all mice
[ 41.688229] EISA: Probing bus 0 at eisa.0
[ 41.688326] EISA: Detected 0 cards.
[ 41.688377] cpuidle: using governor ladder
[ 41.688427] cpuidle: using governor menu
[ 41.688622] NET: Registered protocol family 1
[ 41.688716] Using IPI No-Shortcut mode
[ 41.688812] registered taskstats version 1
[ 41.689039] Magic number: 12:280:233
[ 41.689128] hash matches device ttyv3
[ 41.689776] Freeing unused kernel memory: 364k freed
[ 41.705222] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 43.071461] fuse init (API version 7.9)
[ 43.081586] ACPI: Fan [FAN] (on)
[ 43.094581] ACPI: Thermal Zone [THRM] (14 C)
[ 43.442140] usbcore: registered new interface driver usbfs
[ 43.442190] usbcore: registered new interface driver hub
[ 43.442253] usbcore: registered new device driver usb
[ 43.444927] USB Universal Host Controller Interface driver v3.0
[ 43.445051] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) ->
IRQ 16
[ 43.445076] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 43.445085] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 43.445592] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus
number 1
[ 43.445645] uhci_hcd 0000:00:1f.2: irq 16, io base 0x0000d000
[ 43.445952] usb usb1: configuration #1 chosen from 1 choice
[ 43.446015] hub 1-0:1.0: USB hub found
[ 43.446031] hub 1-0:1.0: 2 ports detected
[ 43.550206] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) ->
IRQ 17
[ 43.550236] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 43.550245] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 43.550305] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus
number 2
[ 43.550349] uhci_hcd 0000:00:1f.4: irq 17, io base 0x0000d800
[ 43.550624] usb usb2: configuration #1 chosen from 1 choice
[ 43.550689] hub 2-0:1.0: USB hub found
[ 43.550703] hub 2-0:1.0: 2 ports detected
[ 43.558184] SCSI subsystem initialized
[ 43.782272] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) ->
IRQ 18
[ 43.834095] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]
MMIO=[f0102000-f01027ff] Max Packet=[1024] IR/IT contexts=[4/4]
[ 43.902331] libata version 3.00 loaded.
[ 43.902491] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 43.902500] e100: Copyright(c) 1999-2006 Intel Corporation
[ 43.902630] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 16 (level, low) ->
IRQ 19
[ 43.928075] Floppy drive(s): fd0 is 1.44M
[ 43.933426] e100: eth0: e100_probe: addr 0xf0101000, irq 19, MAC addr
00:30:48:22:94:12
[ 43.933608] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 43.941105] pata_pdc2027x 0000:03:01.0: version 1.0
[ 43.941179] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 18 (level, low) ->
IRQ 20
[ 43.956771] FDC 0 is a post-1991 82077
[ 44.040342] pata_pdc2027x 0000:03:01.0: PLL input clock 16509 kHz
[ 44.070441] scsi0 : pata_pdc2027x
[ 44.070577] scsi1 : pata_pdc2027x
[ 44.070654] ata1: PATA max UDMA/133 mmio [EMAIL PROTECTED] cmd 0xee0017c0
irq 20
[ 44.070662] ata2: PATA max UDMA/133 mmio [EMAIL PROTECTED] cmd 0xee0015c0
irq 20
[ 44.416644] ata_piix 0000:00:1f.1: version 2.12
[ 44.416743] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 44.416849] scsi2 : ata_piix
[ 44.416977] scsi3 : ata_piix
[ 44.418478] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 44.418488] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 44.581083] ata3.01: ATA-5: FUJITSU MPF3102AT, 0028, max UDMA/66
[ 44.581093] ata3.01: 20015856 sectors, multi 0: LBA
[ 44.600857] ata3.01: configured for UDMA/66
[ 45.167727] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090a94000008bd3]
[ 45.279692] ata4.00: ATAPI: PHILIPS SPD2413P, GP03, max UDMA/66
[ 45.279726] ata4.01: ATAPI: PHILIPS SPD2413P, GP03, max UDMA/66
[ 45.279744] ata4.00: limited to UDMA/33 due to 40-wire cable
[ 45.279748] ata4.01: limited to UDMA/33 due to 40-wire cable
[ 45.467400] ata4.00: configured for UDMA/33
[ 45.655169] ata4.01: configured for UDMA/33
[ 45.655385] scsi 2:0:1:0: Direct-Access ATA FUJITSU MPF3102A 0028
PQ: 0 ANSI: 5
[ 45.656561] scsi 3:0:0:0: CD-ROM PHILIPS SPD2413P GP03
PQ: 0 ANSI: 5
[ 45.657754] scsi 3:0:1:0: CD-ROM PHILIPS SPD2413P GP03
PQ: 0 ANSI: 5
[ 45.671198] Driver 'sd' needs updating - please use bus_type methods
[ 45.671403] sd 2:0:1:0: [sda] 20015856 512-byte hardware sectors (10248 MB)
[ 45.671438] sd 2:0:1:0: [sda] Write Protect is off
[ 45.671444] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 45.671516] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 45.671713] sd 2:0:1:0: [sda] 20015856 512-byte hardware sectors (10248 MB)
[ 45.671739] sd 2:0:1:0: [sda] Write Protect is off
[ 45.671744] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 45.671784] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 45.671791] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 46.213694] sda1 sda2 < sda5 >
[ 46.240888] sd 2:0:1:0: [sda] Attached SCSI disk
[ 46.248495] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 46.248509] Uniform CD-ROM driver Revision: 3.20
[ 46.248620] sd 2:0:1:0: Attached scsi generic sg0 type 0
[ 46.248650] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 46.248688] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 46.248726] sr 3:0:1:0: Attached scsi generic sg2 type 5
[ 46.256183] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 46.256287] sr 3:0:1:0: Attached scsi CD-ROM sr1
[ 46.620369] Attempting manual resume
[ 46.620376] swsusp: Resume From Partition 8:5
[ 46.620378] PM: Checking swsusp image.
[ 46.641727] PM: Resume from disk failed.
[ 46.711491] kjournald starting. Commit interval 5 seconds
[ 46.711506] EXT3-fs: mounted filesystem with ordered data mode.
[ 60.306347] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 60.557112] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 60.574539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 60.714125] iTCO_vendor_support: vendor-support=0
[ 60.849953] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 60.949803] Linux agpgart interface v0.102
[ 61.044478] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input3
[ 61.090603] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by
hardware
[ 61.090628] iTCO_wdt: No card detected
[ 61.096807] agpgart: Detected an Intel i860 Chipset.
[ 61.112509] agpgart: AGP aperture is 256M @ 0xd0000000
[ 61.256663] parport_pc 00:0c: reported by Plug and Play ACPI
[ 61.256776] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 61.687945] Intel 82802 RNG detected
[ 61.723865] EDAC MC: Ver: 2.1.0 Feb 14 2008
[ 61.912841] input: Power Button (FF) as /devices/virtual/input/input4
[ 61.964494] ACPI: Power Button (FF) [PWRF]
[ 61.964628] input: Power Button (CM) as /devices/virtual/input/input5
[ 61.987647] EDAC i82860: i82860 init one
[ 61.987859] EDAC MC0: Giving out device to 'i82860_edac' 'i82860': DEV
0000:00:00.0
[ 61.987918] EDAC PCI0: Giving out device to module 'i82860_edac' controller
'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 61.992459] ACPI: Power Button (CM) [PWRB]
[ 62.216194] Linux video capture interface: v2.00
[ 63.022328] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 63.063210] bttv: driver version 0.9.17 loaded
[ 63.063222] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 63.063365] bttv: Bt8xx card found (0).
[ 63.063406] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 16 (level, low) ->
IRQ 19
[ 63.063430] bttv0: Bt878 (rev 17) at 0000:04:07.0, irq: 19, latency: 64,
mmio: 0xf1000000
[ 63.063453] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is
0070:13eb
[ 63.063460] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[ 63.063499] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
[ 63.065991] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 63.098025] tveeprom 0-0050: Hauppauge model 44981, rev E199, serial# 8185401
[ 63.098034] tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
[ 63.098040] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
[ 63.098046] tveeprom 0-0050: audio processor is None (idx 0)
[ 63.098051] tveeprom 0-0050: decoder processor is BT878 (idx 14)
[ 63.098057] tveeprom 0-0050: has no radio, has IR receiver, has IR
transmitter
[ 63.098063] bttv0: Hauppauge eeprom indicates model#44981
[ 63.098068] bttv0: tuner type=50
[ 63.098078] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 63.098703] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 63.099385] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 63.772612] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
[ 63.772666] tuner-simple 0-0061: type set to 50 (TCL 2002N)
[ 63.772671] tuner 0-0061: type set to TCL 2002N
[ 63.772675] tuner-simple 0-0061: type set to 50 (TCL 2002N)
[ 63.772679] tuner 0-0061: type set to TCL 2002N
[ 63.796195] bttv0: registered device video0
[ 63.796260] bttv0: registered device vbi0
[ 63.796296] bttv0: PLL: 28636363 => 35468950 .. ok
[ 63.847657] gameport: EMU10K1 is pci0000:03:02.1/gameport0, io 0xb800, speed
795kHz
[ 63.946937] bt878: AUDIO driver version 0.0.0 loaded
[ 63.947048] bt878: Bt878 AUDIO function found (0).
[ 63.947086] ACPI: PCI Interrupt 0000:04:07.1[A] -> GSI 16 (level, low) ->
IRQ 19
[ 63.947101] bt878_probe: card id=[0x13eb0070], Unknown card.
[ 63.947103] Exiting..
[ 63.947112] ACPI: PCI interrupt for device 0000:04:07.1 disabled
[ 63.947127] bt878: probe of 0000:04:07.1 failed with error -22
[ 63.979047] ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 18 (level, low) ->
IRQ 20
[ 63.999863] ACPI: PCI Interrupt 0000:04:07.1[A] -> GSI 16 (level, low) ->
IRQ 19
[ 64.000419] ALSA
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/bt87x.c:947:
bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 64.008348] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) ->
IRQ 18
[ 64.008387] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 64.599688] intel8x0_measure_ac97_clock: measured 55685 usecs
[ 64.599696] intel8x0: clocking to 48000
[ 64.803095] NET: Registered protocol family 17
[ 65.467351] lp0: using parport0 (interrupt-driven).
[ 65.620379] Adding 465844k swap on /dev/sda5. Priority:-1 extents:1
across:465844k
[ 66.294448] EXT3 FS on sda1, internal journal
[ 66.896816] NET: Registered protocol family 10
[ 66.897560] lo: Disabled Privacy Extensions
[ 68.161006] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 71.666523] No dock devices found.
[ 71.724942] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 76.283797] ppdev: user-space parallel port driver
[ 76.997744] audit(1203689640.226:2): operation="inode_permission"
request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5860
profile="/usr/sbin/cupsd" namespace="default"
[ 77.171242] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 77.171261] apm: disabled - APM is not SMP safe.
[ 77.859416] eth0: no IPv6 routers present
[28414.876970] usb 1-1: new full speed USB device using uhci_hcd and address 2
[28415.051889] usb 1-1: configuration #1 chosen from 1 choice
[28415.165613] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid
0x04E8 pid 0x323C
[28415.165646] usbcore: registered new interface driver usblp
[EMAIL PROTECTED]:~#
--
rastertospl2 in cups prevents printing
https://bugs.launchpad.net/bugs/194302
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
