Still not working!
# uname -a
Linux munzel 2.6.20-15-386 #2 Sun Apr 15 07:34:00 UTC 2007 i686 GNU/Linux
[ 2939.423889] acx: Loaded combined PCI/USB driver, firmware_ver=default
[ 2939.423904] acx: compiled to use 32bit I/O access. I/O timing issues might
occur, such as non-working firmware upload. Report them
[ 2939.440008] PCI: Found IRQ 11 for device 0000:00:0a.0
[ 2939.440217] PCI: Sharing IRQ 11 with 0000:01:00.0
[ 2939.440399] acx: found ACX100-based wireless network card at 0000:00:0a.0,
irq:11, phymem1:0xFEDFD000, phymem2:0xFEDE0000, mem1:0xe0a22000,
mem1_size:4096, mem2:0xe0b80000, mem2_size:65536
[ 2939.440951] acx: eCPU is already running. reset_dev() FAILED
[ 2939.455978] acx_pci: probe of 0000:00:0a.0 failed with error -5
[ 2939.456240] usbcore: registered new interface driver acx_usb
00:0a.0 Network controller: Texas Instruments ACX 100 22Mbps Wireless
Interface
00:0a.0 0280: 104c:8400
Subsystem: 16ab:8501
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 6400 [size=32]
Region 1: Memory at fedfd000 (32-bit, non-prefetchable) [size=4K]
Region 2: Memory at fede0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D3 PME-Enable- DSel=0 DScale=0 PME-
--
acx100 module broken
https://bugs.launchpad.net/bugs/64858
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
