Public bug reported:
Binary package hint: hpoj
My hpoj version on gutsy is 0.91-12build1, the same is occuring under hardy6
When I try using my C4100 from hp, I get the following error by configuring
hpoj :
# /etc/init.d/hpoj setup
Stopping the HP OfficeJet Linux driver.
----------------------------------------------------------------------
This program manages devices controlled by the HP OfficeJet Linux
driver (hpoj). It attempts to probe your computer for local parallel-
and USB-connected devices, and allows you to specify network addresses
for remote JetDirect-connected devices.
If you experience any difficulties in detecting your device(s), then
refer to the hpoj documentation for troubleshooting information.
----------------------------------------------------------------------
Currently defined device names ([*]=default):
(none)
----------------------------------------------------------------------
Probe for parallel-connected devices ([y]/n)? n
----------------------------------------------------------------------
Probe for USB-connected devices ([y]/n)? y
Probing "/dev/usb/lp0"...
*** Found "Photosmart C4100 series" but failed to communicate with it!
*** Elapsed time for this attempt was 6 second(s).
*** Check syslog file for ptal-mlcd error messages.
*** See hpoj documentation for troubleshooting information.
Probing "/dev/usblp0"...
*** Found "Photosmart C4100 series" but failed to communicate with it!
*** Elapsed time for this attempt was 6 second(s).
*** Check syslog file for ptal-mlcd error messages.
*** See hpoj documentation for troubleshooting information.
Probing "%005%005"...
No device found.
Probing "%005%001"...
No device found.
Probing "%003%001"...
No device found.
Probing "%004%001"...
No device found.
Probing "%002%001"...
No device found.
Probing "%001%001"...
No device found.
----------------------------------------------------------------------
Press <Enter> alone to continue, or if you would like to add a
JetDirect-connected device, then enter its dotted-decimal
IP address or hostname here --->
----------------------------------------------------------------------
Done updating device configuration files stored under /etc/ptal.
If you make manual changes to those files, then be sure to run
"/etc/init.d/hpoj start" so they will take effect.
----------------------------------------------------------------------
Starting the HP OfficeJet Linux driver.
No hpoj devices have been configured.
As root, run "/etc/init.d/hpoj setup".
** Affects: hpoj (Ubuntu)
Importance: Undecided
Status: New
--
[hardy][gutsy] hpoj failed to communicate with printer
https://bugs.launchpad.net/bugs/201767
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
