:~$ dmesg [ 0.000000] Linux version 2.6.24-12-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 23:01:54 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff30000 (usable) [ 0.000000] BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 524080) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524080 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524080 [ 0.000000] On node 0 totalpages: 524080 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292402 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F9D90 checksum 0 [ 0.000000] ACPI: RSDP 000F9D90, 0021 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 7FF30100, 003C (r1 A M I OEMXSDT 8000504 MSFT 97) [ 0.000000] ACPI: FACP 7FF30290, 00F4 (r3 A M I OEMFACP 8000504 MSFT 97) [ 0.000000] ACPI: DSDT 7FF303F0, 37B5 (r1 P4C81 P4C81106 106 INTL 2002026) [ 0.000000] ACPI: FACS 7FF40000, 0040 [ 0.000000] ACPI: APIC 7FF30390, 005C (r1 A M I OEMAPIC 8000504 MSFT 97) [ 0.000000] ACPI: OEMB 7FF40040, 003F (r1 A M I OEMBIOS 8000504 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:2 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:2 APIC version 20 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fb80000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519986 [ 0.000000] Kernel command line: root=UUID=4cff4e26-6beb-4f84-b8f0-d853d06b3c79 ro quiet splash locale=fr_FR [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2798.709 MHz processor. [ 29.022485] Console: colour VGA+ 80x25 [ 29.022489] console [tty0] enabled [ 29.023057] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 29.023635] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 29.163009] Memory: 2066336k/2096320k available (2164k kernel code, 28648k reserved, 1007k data, 364k init, 1178816k highmem) [ 29.163018] virtual kernel memory layout: [ 29.163019] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 29.163020] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 29.163021] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 29.163022] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 29.163023] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 29.163024] .data : 0xc031d1bd - 0xc0418dc4 (1007 kB) [ 29.163025] .text : 0xc0100000 - 0xc031d1bd (2164 kB) [ 29.163028] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 29.163085] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 29.242920] Calibrating delay using timer specific routine.. 5602.10 BogoMIPS (lpj=11204218) [ 29.242952] Security Framework initialized [ 29.242963] SELinux: Disabled at boot. [ 29.242980] AppArmor: AppArmor initialized [ 29.242984] Failure registering capabilities with primary security module. [ 29.242994] Mount-cache hash table entries: 512 [ 29.243157] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000 [ 29.243170] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 29.243172] CPU: L2 cache: 512K [ 29.243175] CPU: Physical Processor ID: 0 [ 29.243177] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000 [ 29.243190] Compat vDSO mapped to ffffe000. [ 29.243205] Checking 'hlt' instruction... OK. [ 29.259258] SMP alternatives: switching to UP code [ 29.260902] Early unpacking initramfs... done [ 29.562747] ACPI: Core revision 20070126 [ 29.562794] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 29.575656] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 [ 29.575675] SMP alternatives: switching to SMP code [ 29.576326] Booting processor 1/1 eip 3000 [ 29.586425] Initializing CPU#1 [ 29.665910] Calibrating delay using timer specific routine.. 5597.76 BogoMIPS (lpj=11195528) [ 29.665921] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000 [ 29.665932] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 29.665934] CPU: L2 cache: 512K [ 29.665936] CPU: Physical Processor ID: 0 [ 29.665938] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000 [ 29.666153] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 [ 29.666195] Total of 2 processors activated (11199.87 BogoMIPS). [ 29.666325] ENABLING IO-APIC IRQs [ 29.666502] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 29.813715] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 29.833686] Brought up 2 CPUs [ 29.833712] CPU0 attaching sched-domain: [ 29.833715] domain 0: span 03 [ 29.833718] groups: 01 02 [ 29.833722] domain 1: span 03 [ 29.833724] groups: 03 [ 29.833727] CPU1 attaching sched-domain: [ 29.833729] domain 0: span 03 [ 29.833731] groups: 02 01 [ 29.833734] domain 1: span 03 [ 29.833736] groups: 03 [ 29.834066] net_namespace: 64 bytes [ 29.834077] Booting paravirtualized kernel on bare hardware [ 29.834733] Time: 18:31:33 Date: 03/15/08 [ 29.834810] NET: Registered protocol family 16 [ 29.835105] EISA bus registered [ 29.835112] ACPI: bus type pci registered [ 29.835300] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 29.835303] PCI: Using configuration type 1 [ 29.835305] Setting up standard PCI resources [ 29.848945] ACPI: EC: Look up EC in DSDT [ 29.853544] ACPI: Interpreter enabled [ 29.853550] ACPI: (supports S0 S1 S3 S4 S5) [ 29.853570] ACPI: Using IOAPIC for interrupt routing [ 29.860747] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 29.861248] Force enabled HPET at base address 0xfed00000 [ 29.861256] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 29.861260] PCI quirk: region 0480-04bf claimed by ICH4 GPIO [ 29.861847] PCI: Transparent bridge - 0000:00:1e.0 [ 29.861872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 29.861968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 29.867853] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 29.867952] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 29.868048] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 29.868146] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 29.868242] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 29.868339] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 29.868438] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 29.868534] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 29.868691] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - EA, should be DB [20070126] [ 29.868698] Linux Plug and Play Support v0.97 (c) Adam Belay [ 29.868746] pnp: PnP ACPI init [ 29.868756] ACPI: bus type pnp registered [ 29.872911] pnp: PnP ACPI: found 14 devices [ 29.872913] ACPI: ACPI bus type pnp unregistered [ 29.872918] PnPBIOS: Disabled by ACPI PNP [ 29.873269] PCI: Using ACPI for IRQ routing [ 29.873273] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 29.893416] NET: Registered protocol family 8 [ 29.893419] NET: Registered protocol family 20 [ 29.893550] hpet clockevent registered [ 29.893556] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 29.893561] hpet0: 3 64-bit timers, 14318180 Hz [ 29.894607] AppArmor: AppArmor Filesystem Enabled [ 29.897373] Time: tsc clocksource has been installed. [ 29.909411] system 00:0a: ioport range 0x680-0x6ff has been reserved [ 29.909414] system 00:0a: ioport range 0x290-0x297 has been reserved [ 29.909422] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 29.909425] system 00:0b: ioport range 0x800-0x87f has been reserved [ 29.909428] system 00:0b: ioport range 0x480-0x4bf has been reserved [ 29.909431] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved [ 29.909435] system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved [ 29.909442] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 29.909444] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 29.909452] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 29.909455] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved [ 29.909457] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 29.909460] system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved [ 29.909463] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved [ 29.939985] PCI: Bridge: 0000:00:01.0 [ 29.939987] IO window: disabled. [ 29.939992] MEM window: fc900000-fe9fffff [ 29.939996] PREFETCH window: e7e00000-f7efffff [ 29.940002] PCI: Bridge: 0000:00:1e.0 [ 29.940005] IO window: d000-dfff [ 29.940010] MEM window: fea00000-feafffff [ 29.940014] PREFETCH window: disabled. [ 29.940032] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 29.940045] NET: Registered protocol family 2 [ 29.977281] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 29.977690] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 29.978558] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 29.979114] TCP: Hash tables configured (established 131072 bind 65536) [ 29.979119] TCP reno registered [ 29.989366] checking if image is initramfs... it is [ 30.392349] Switched to high resolution mode on CPU 1 [ 30.396185] Switched to high resolution mode on CPU 0 [ 30.586101] Freeing initrd memory: 7283k freed [ 30.586850] audit: initializing netlink socket (disabled) [ 30.586866] audit(1205605893.296:1): initialized [ 30.587157] highmem bounce pool size: 64 pages [ 30.589778] VFS: Disk quotas dquot_6.5.1 [ 30.589894] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 30.590079] io scheduler noop registered [ 30.590082] io scheduler anticipatory registered [ 30.590084] io scheduler deadline registered [ 30.590098] io scheduler cfq registered (default) [ 30.590185] Boot video device is 0000:01:00.0 [ 30.590576] isapnp: Scanning for PnP cards... [ 30.943631] isapnp: No Plug & Play device found [ 30.982509] Real Time Clock Driver v1.12ac [ 30.982641] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 30.983154] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.983351] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 30.984135] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 30.984493] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 30.985594] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 30.985682] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 30.985824] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 30.985827] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 30.986478] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 31.003744] mice: PS/2 mouse device common for all mice [ 31.003913] EISA: Probing bus 0 at eisa.0 [ 31.003952] EISA: Detected 0 cards. [ 31.003956] cpuidle: using governor ladder [ 31.003958] cpuidle: using governor menu [ 31.004060] NET: Registered protocol family 1 [ 31.004095] Using IPI No-Shortcut mode [ 31.004131] registered taskstats version 1 [ 31.004248] Magic number: 0:495:544 [ 31.004362] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 31.004364] EDD information not available. [ 31.004710] Freeing unused kernel memory: 364k freed [ 31.023760] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 32.286214] fuse init (API version 7.9) [ 32.512060] usbcore: registered new interface driver usbfs [ 32.512098] usbcore: registered new interface driver hub [ 32.531901] usbcore: registered new device driver usb [ 32.538291] USB Universal Host Controller Interface driver v3.0 [ 32.538378] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 32.538393] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 32.538400] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 32.538718] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 32.538752] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0 [ 32.538962] usb usb1: configuration #1 chosen from 1 choice [ 32.539001] hub 1-0:1.0: USB hub found [ 32.539015] hub 1-0:1.0: 2 ports detected [ 32.643746] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 32.643763] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 32.643769] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 32.643814] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 32.643845] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ef00 [ 32.644028] usb usb2: configuration #1 chosen from 1 choice [ 32.644086] hub 2-0:1.0: USB hub found [ 32.644102] hub 2-0:1.0: 2 ports detected [ 32.747467] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 32.747483] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 32.747489] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 32.747524] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 32.747554] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20 [ 32.747727] usb usb3: configuration #1 chosen from 1 choice [ 32.747767] hub 3-0:1.0: USB hub found [ 32.747778] hub 3-0:1.0: 2 ports detected [ 32.771710] SCSI subsystem initialized [ 32.851234] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 [ 32.851251] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 32.851257] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 32.851293] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 32.851320] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef40 [ 32.851502] usb usb4: configuration #1 chosen from 1 choice [ 32.851542] hub 4-0:1.0: USB hub found [ 32.851551] hub 4-0:1.0: 2 ports detected [ 32.883014] usb 1-2: new low speed USB device using uhci_hcd and address 2 [ 32.897319] libata version 3.00 loaded. [ 32.955167] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 [ 32.955187] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 32.955192] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 32.955235] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 32.959140] ehci_hcd 0000:00:1d.7: debug port 1 [ 32.959149] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 32.959165] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebfbc00 [ 33.010673] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.010862] usb usb5: configuration #1 chosen from 1 choice [ 33.010901] hub 5-0:1.0: USB hub found [ 33.010912] hub 5-0:1.0: 8 ports detected [ 33.076619] Floppy drive(s): fd0 is 1.44M [ 33.097264] FDC 0 is a post-1991 82077 [ 33.114809] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 20 [ 33.114850] skge 1.13 addr 0xfeaf8000 irq 20 chip Yukon rev 1 [ 33.115283] skge eth0: addr 00:0c:6e:47:0f:5a [ 33.119530] sata_promise 0000:02:04.0: version 2.11 [ 33.119563] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 33.142216] scsi0 : sata_promise [ 33.143396] scsi1 : sata_promise [ 33.145112] scsi2 : sata_promise [ 33.145205] ata1: SATA max UDMA/133 mmio [EMAIL PROTECTED] port 0xfeafe200 irq 19 [ 33.145212] ata2: SATA max UDMA/133 mmio [EMAIL PROTECTED] port 0xfeafe280 irq 19 [ 33.145219] ata3: PATA max UDMA/133 mmio [EMAIL PROTECTED] port 0xfeafe300 irq 19 [ 33.404707] usb 1-2: device not accepting address 2, error -71 [ 33.453608] ata1: SATA link down (SStatus 0 SControl 0) [ 33.764867] ata2: SATA link down (SStatus 0 SControl 300) [ 33.883510] usb 1-2: new low speed USB device using uhci_hcd and address 4 [ 33.919870] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 33.919880] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 33.919936] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 33.919958] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 33.919985] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 33.920021] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 33.920037] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 33.925561] ata_piix 0000:00:1f.1: version 2.12 [ 33.925591] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 33.925646] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 33.926550] scsi3 : ata_piix [ 33.926678] scsi4 : ata_piix [ 33.928021] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 33.928025] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 34.058982] usb 1-2: configuration #1 chosen from 1 choice [ 34.088591] usbcore: registered new interface driver hiddev [ 34.103036] input: Wireless Mouse Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input2 [ 34.122976] input,hidraw0: USB HID v1.10 Mouse [Wireless Mouse Wireless Mouse] on usb-0000:00:1d.0-2 [ 34.123011] usbcore: registered new interface driver usbhid [ 34.123017] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 34.410723] ata4.00: ATAPI: PHILIPS DVDR1660P1, P1.6, max UDMA/33 [ 34.410749] ata4.01: ATAPI: Polaroid BurnMAX48, VER 482E, max UDMA/33 [ 34.582198] ata4.00: configured for UDMA/33 [ 34.753563] ata4.01: configured for UDMA/33 [ 34.912273] scsi 3:0:0:0: CD-ROM PHILIPS DVDR1660P1 P1.6 PQ: 0 ANSI: 5 [ 34.914690] scsi 3:0:1:0: CD-ROM Polaroid BurnMAX48 482E PQ: 0 ANSI: 5 [ 34.914803] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 34.914829] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 [ 34.914890] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 34.915005] scsi5 : ata_piix [ 34.915091] scsi6 : ata_piix [ 34.915146] ata6: SATA max UDMA/133 cmd 0xefe0 ctl 0xefac bmdma 0xef90 irq 18 [ 34.915150] ata7: SATA max UDMA/133 cmd 0xefa0 ctl 0xefa8 bmdma 0xef98 irq 18 [ 35.076914] ata6.00: ATA-7: Maxtor 6Y120M0, YAR51BW0, max UDMA/133 [ 35.076919] ata6.00: 240121728 sectors, multi 16: LBA [ 35.093878] ata6.00: configured for UDMA/133 [ 35.258970] scsi 5:0:0:0: Direct-Access ATA Maxtor 6Y120M0 YAR5 PQ: 0 ANSI: 5 [ 35.277824] Driver 'sd' needs updating - please use bus_type methods [ 35.277990] sd 5:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB) [ 35.278012] sd 5:0:0:0: [sda] Write Protect is off [ 35.278016] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.280638] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.280779] sd 5:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB) [ 35.280806] sd 5:0:0:0: [sda] Write Protect is off [ 35.280813] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.280851] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.280859] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 35.293980] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 35.293988] Uniform CD-ROM driver Revision: 3.20 [ 35.294062] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 35.298379] sda1 sda2 sda3 < sda5 sda6 > sda4 [ 35.323383] sd 5:0:0:0: [sda] Attached SCSI disk [ 35.323824] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 35.323933] sr 3:0:1:0: Attached scsi CD-ROM sr1 [ 35.337072] sr 3:0:0:0: Attached scsi generic sg0 type 5 [ 35.337109] sr 3:0:1:0: Attached scsi generic sg1 type 5 [ 35.337141] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 35.649461] Attempting manual resume [ 35.649465] swsusp: Resume From Partition 8:6 [ 35.649467] PM: Checking swsusp image. [ 35.649684] PM: Resume from disk failed. [ 35.680348] kjournald starting. Commit interval 5 seconds [ 35.680369] EXT3-fs: mounted filesystem with ordered data mode. [ 40.923374] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 41.236156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 41.272486] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 41.321920] parport_pc 00:09: reported by Plug and Play ACPI [ 41.322020] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 41.432963] EDAC MC: Ver: 2.1.0 Mar 12 2008 [ 41.637352] intel_rng: FWH not detected [ 41.701351] EDAC i82875p: i82875p init one [ 41.702304] EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0 [ 41.702349] EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) [ 41.848918] Linux agpgart interface v0.102 [ 41.952656] iTCO_vendor_support: vendor-support=0 [ 41.996540] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 41.996667] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860) [ 41.996716] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 42.102468] input: Power Button (FF) as /devices/virtual/input/input4 [ 42.135184] ACPI: Power Button (FF) [PWRF] [ 42.135333] input: Power Button (CM) as /devices/virtual/input/input5 [ 42.183010] ACPI: Power Button (CM) [PWRB] [ 43.369586] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 43.392686] phy0: Selected rate control algorithm 'simple' [ 44.333216] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 20 [ 45.695049] lp0: using parport0 (interrupt-driven). [ 45.784368] Adding 2216928k swap on /dev/sda6. Priority:-1 extents:1 across:2216928k [ 46.397426] EXT3 FS on sda4, internal journal [ 47.800095] ip_tables: (C) 2000-2006 Netfilter Core Team [ 48.284616] No dock devices found. [ 50.086706] ppdev: user-space parallel port driver [ 50.402326] audit(1205602313.853:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=4984 profile="/usr/sbin/cupsd" namespace="default" [ 50.457039] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 50.457049] apm: disabled - APM is not SMP safe. [ 52.980635] skge eth0: enabling interface [ 130.667879] NET: Registered protocol family 17 [ 131.731587] wlan0: Initial auth_alg=0 [ 131.731598] wlan0: authenticate with AP 00:1d:60:33:a7:e8 [ 131.733005] wlan0: RX authentication from 00:1d:60:33:a7:e8 (alg=0 transaction=2 status=0) [ 131.733012] wlan0: authenticated [ 131.733017] wlan0: associate with AP 00:1d:60:33:a7:e8 [ 131.735689] wlan0: RX AssocResp from 00:1d:60:33:a7:e8 (capab=0x411 status=0 aid=1) [ 131.735698] wlan0: associated [ 131.735705] wlan0: switched to short barker preamble (BSSID=00:1d:60:33:a7:e8) [ 131.735774] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0 [ 131.735779] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 131.735783] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 131.735787] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
-- lsusb make freeze hardy heron https://bugs.launchpad.net/bugs/200677 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
