Here you go. Chuck Short wrote: > This sounds like a kernel issue. If possible can you attach the output > of dmesg > > Thanks > chuck > > ** Changed in: linux (Ubuntu) > Sourcepackagename: samba => linux > >
[ 0.000000] Linux version 2.6.24-11-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu1)) #1 SMP Fri Feb 29 21:26:31 UTC 2008 (Ubuntu 2.6.24-11.17-generic) [ 0.000000] Command line: root=UUID=90b1cfb9-9abf-4d43-a328-f42141a59bd0 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524016) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7CE0 checksum 0 [ 0.000000] ACPI: RSDP 000F7CE0, 0014 (r0 K8M890) [ 0.000000] ACPI: RSDT 7FEF3040, 0034 (r1 K8M890 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FEF30C0, 0074 (r1 K8M890 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FEF3180, 6DE7 (r1 K8M890 AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FEF0000, 0040 [ 0.000000] ACPI: HPET 7FEFA080, 0038 (r1 K8M890 AWRDACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 7FEFA100, 003C (r1 K8M890 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7FEF9FC0, 0074 (r1 K8M890 AWRDACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 2 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fef0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524016) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fef0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524016 [ 0.000000] On node 0 totalpages: 523919 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1225 pages reserved [ 0.000000] DMA zone: 2718 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7108 pages used for memmap [ 0.000000] DMA32 zone: 512812 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515530 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=90b1cfb9-9abf-4d43-a328-f42141a59bd0 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 37.112545] Marking TSC unstable due to TSCs unsynchronized [ 37.112546] time.c: Detected 2599.962 MHz processor. [ 37.114286] Console: colour VGA+ 80x25 [ 37.114289] console [tty0] enabled [ 37.114301] Checking aperture... [ 37.114302] CPU 0: aperture @ d0000000 size 128 MB [ 37.128477] Memory: 2054568k/2096064k available (2465k kernel code, 41108k reserved, 1310k data, 316k init) [ 37.128506] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 37.206336] Calibrating delay using timer specific routine.. 5202.94 BogoMIPS (lpj=10405899) [ 37.206363] Security Framework initialized [ 37.206368] SELinux: Disabled at boot. [ 37.206380] AppArmor: AppArmor initialized [ 37.206383] Failure registering capabilities with primary security module. [ 37.206503] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 37.207551] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 37.208054] Mount-cache hash table entries: 256 [ 37.208164] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 37.208165] CPU: L2 Cache: 1024K (64 bytes/line) [ 37.208167] CPU 0/0 -> Node 0 [ 37.208169] CPU: Physical Processor ID: 0 [ 37.208170] CPU: Processor Core ID: 0 [ 37.208190] SMP alternatives: switching to UP code [ 37.208684] Early unpacking initramfs... done [ 37.437174] ACPI: Core revision 20070126 [ 37.437222] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 37.480791] Using local APIC timer interrupts. [ 37.519175] APIC timer calibration result 12499808 [ 37.519177] Detected 12.499 MHz APIC timer. [ 37.519255] SMP alternatives: switching to SMP code [ 37.519591] Booting processor 1/2 APIC 0x1 [ 37.530004] Initializing CPU#1 [ 37.607350] Calibrating delay using timer specific routine.. 5199.96 BogoMIPS (lpj=10399930) [ 37.607355] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 37.607356] CPU: L2 Cache: 1024K (64 bytes/line) [ 37.607358] CPU 1/1 -> Node 0 [ 37.607360] CPU: Physical Processor ID: 0 [ 37.607360] CPU: Processor Core ID: 1 [ 37.607453] AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 03 [ 37.607184] Brought up 2 CPUs [ 37.607269] CPU0 attaching sched-domain: [ 37.607271] domain 0: span 03 [ 37.607272] groups: 01 02 [ 37.607274] domain 1: span 03 [ 37.607276] groups: 03 [ 37.607277] CPU1 attaching sched-domain: [ 37.607278] domain 0: span 03 [ 37.607279] groups: 02 01 [ 37.607281] domain 1: span 03 [ 37.607282] groups: 03 [ 37.607442] net_namespace: 120 bytes [ 37.607782] Time: 3:47:35 Date: 03/18/08 [ 37.607821] NET: Registered protocol family 16 [ 37.607949] ACPI: bus type pci registered [ 37.607999] PCI: Using configuration type 1 [ 37.609863] ACPI: EC: Look up EC in DSDT [ 37.616421] ACPI: Interpreter enabled [ 37.616427] ACPI: (supports S0 S1 S4 S5) [ 37.616438] ACPI: Using IOAPIC for interrupt routing [ 37.622600] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 37.623881] PCI: Transparent bridge - 0000:00:13.1 [ 37.623906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 37.624122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT] [ 37.624221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 37.624320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT] [ 37.681340] ACPI: PCI Root Bridge [PCI1] (0000:80) [ 37.681400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] [ 37.681659] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 37.681808] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 37.681958] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12) [ 37.682108] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12) [ 37.682241] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 37.682371] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 37.682501] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 37.682640] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5 [ 37.682737] Linux Plug and Play Support v0.97 (c) Adam Belay [ 37.682759] pnp: PnP ACPI init [ 37.682764] ACPI: bus type pnp registered [ 37.686791] pnpacpi: exceeded the max number of mem resources: 12 [ 37.686871] pnp: PnP ACPI: found 15 devices [ 37.686872] ACPI: ACPI bus type pnp unregistered [ 37.687030] PCI: Using ACPI for IRQ routing [ 37.687032] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 37.687041] PCI: Cannot allocate resource region 0 of device 0000:00:00.0 [ 37.702807] NET: Registered protocol family 8 [ 37.702809] NET: Registered protocol family 20 [ 37.702855] agpgart: Detected AGP bridge 0 [ 37.707324] agpgart: AGP aperture is 128M @ 0xd0000000 [ 37.707382] AppArmor: AppArmor Filesystem Enabled [ 37.722779] system 00:01: ioport range 0x400-0x47f has been reserved [ 37.722781] system 00:01: ioport range 0x500-0x50f has been reserved [ 37.722786] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 37.722788] system 00:02: ioport range 0x290-0x297 has been reserved [ 37.722799] system 00:0b: iomem range 0xf0000000-0xf0000fff has been reserved [ 37.722804] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved [ 37.722810] system 00:0e: iomem range 0xd0000-0xd3fff has been reserved [ 37.722812] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved [ 37.722814] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved [ 37.722816] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved [ 37.722818] system 00:0e: iomem range 0x7ff00000-0x7fffffff has been reserved [ 37.722820] system 00:0e: iomem range 0xfed00000-0xfed000ff has been reserved [ 37.722822] system 00:0e: iomem range 0x7fef0000-0x7fefffff could not be reserved [ 37.722824] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved [ 37.722826] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 37.722828] system 00:0e: iomem range 0x100000-0x7feeffff could not be reserved [ 37.722830] system 00:0e: iomem range 0x0-0x0 could not be reserved [ 37.722831] system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved [ 37.723111] PCI: Bridge: 0000:00:01.0 [ 37.723113] IO window: e000-efff [ 37.723117] MEM window: dfc00000-dfcfffff [ 37.723119] PREFETCH window: dfb00000-dfbfffff [ 37.723124] PCI: Bridge: 0000:00:02.0 [ 37.723126] IO window: d000-dfff [ 37.723129] MEM window: da000000-ddffffff [ 37.723132] PREFETCH window: c0000000-cfffffff [ 37.723135] PCI: Bridge: 0000:00:03.0 [ 37.723137] IO window: c000-cfff [ 37.723141] MEM window: dfe00000-dfefffff [ 37.723144] PREFETCH window: dfd00000-dfdfffff [ 37.723148] PCI: Bridge: 0000:00:13.1 [ 37.723150] IO window: b000-bfff [ 37.723153] MEM window: dfa00000-dfafffff [ 37.723156] PREFETCH window: df900000-df9fffff [ 37.723169] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 37.723187] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 [ 37.723191] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 37.723204] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31 [ 37.723208] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 37.723217] PCI: Setting latency timer of device 0000:00:13.1 to 64 [ 37.723284] NET: Registered protocol family 2 [ 37.726742] Time: acpi_pm clocksource has been installed. [ 37.726753] Switched to high resolution mode on CPU 0 [ 37.727216] Switched to high resolution mode on CPU 1 [ 37.758719] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 37.759245] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 37.761011] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 37.761535] TCP: Hash tables configured (established 262144 bind 65536) [ 37.761537] TCP reno registered [ 37.770732] checking if image is initramfs... it is [ 38.225849] Freeing initrd memory: 7404k freed [ 38.230117] audit: initializing netlink socket (disabled) [ 38.230127] audit(1205812056.088:1): initialized [ 38.231610] VFS: Disk quotas dquot_6.5.1 [ 38.231664] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 38.231753] io scheduler noop registered [ 38.231755] io scheduler anticipatory registered [ 38.231757] io scheduler deadline registered [ 38.231827] io scheduler cfq registered (default) [ 38.231837] PCI: VIA PCI bridge detected. Disabling DAC. [ 38.232478] Boot video device is 0000:02:00.0 [ 38.232622] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 38.232651] assign_interrupt_mode Found MSI capability [ 38.232687] Allocate Port Service[0000:00:02.0:pcie00] [ 38.232714] Allocate Port Service[0000:00:02.0:pcie02] [ 38.232774] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 38.232809] assign_interrupt_mode Found MSI capability [ 38.232850] Allocate Port Service[0000:00:03.0:pcie00] [ 38.232873] Allocate Port Service[0000:00:03.0:pcie02] [ 38.252338] Real Time Clock Driver v1.12ac [ 38.252415] Linux agpgart interface v0.102 [ 38.252417] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 38.252520] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 38.252624] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 38.252988] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 38.253136] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 38.253664] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 38.253716] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 38.253810] PNP: No PS/2 controller found. Probing ports directly. [ 38.254493] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 38.254501] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 38.266948] mice: PS/2 mouse device common for all mice [ 38.266985] cpuidle: using governor ladder [ 38.266986] cpuidle: using governor menu [ 38.267091] NET: Registered protocol family 1 [ 38.267140] registered taskstats version 1 [ 38.267232] Magic number: 0:883:765 [ 38.267302] hash matches device ptyp1 [ 38.267332] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 38.267334] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 38.267335] EDD information not available. [ 38.267344] Freeing unused kernel memory: 316k freed [ 39.414113] fuse init (API version 7.9) [ 39.633394] SCSI subsystem initialized [ 39.637217] libata version 3.00 loaded. [ 39.638295] sata_via 0000:00:0f.0: version 2.3 [ 39.638324] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21 [ 39.638363] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 39.675053] scsi0 : sata_via [ 39.701084] scsi1 : sata_via [ 39.702097] ata1: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 21 [ 39.702100] ata2: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 21 [ 39.702543] usbcore: registered new interface driver usbfs [ 39.702557] usbcore: registered new interface driver hub [ 39.703291] usbcore: registered new device driver usb [ 39.703326] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 39.703329] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 39.703982] USB Universal Host Controller Interface driver v3.0 [ 39.759903] Floppy drive(s): fd0 is 1.44M [ 39.779418] FDC 0 is a post-1991 82077 [ 39.905901] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 40.070222] ata1.00: ATA-6: ST3160827AS, 3.42, max UDMA/133 [ 40.070225] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 40.082188] ata1.00: configured for UDMA/133 [ 40.285061] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 40.491674] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 40.491676] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 40.558168] ata2.00: configured for UDMA/133 [ 40.557902] scsi 0:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 ANSI: 5 [ 40.557975] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 40.559285] pata_via 0000:00:0f.1: version 0.3.3 [ 40.559447] scsi2 : pata_via [ 40.559479] scsi3 : pata_via [ 40.560524] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 40.560526] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 40.780851] ata3.00: ATA-6: ST340014A, 3.06, max UDMA/100 [ 40.780854] ata3.00: 78165360 sectors, multi 16: LBA48 [ 40.796655] ata3.00: configured for UDMA/100 [ 41.295157] ata4.00: ATAPI: LITE-ON DVDRW LH-16W1P, SL02, max UDMA/66 [ 41.295171] ata4.01: ATAPI: Hewlett-Packard CD-Writer cd12d, LKS2, max MWDMA2 [ 41.295179] ata4.00: limited to UDMA/33 due to 40-wire cable [ 41.482613] ata4.00: configured for UDMA/33 [ 41.654230] ata4.01: configured for MWDMA2 [ 41.654285] scsi 2:0:0:0: Direct-Access ATA ST340014A 3.06 PQ: 0 ANSI: 5 [ 41.655639] scsi 3:0:0:0: CD-ROM LITE-ON DVDRW LH-16W1P SL02 PQ: 0 ANSI: 5 [ 41.657536] scsi 3:0:1:0: CD-ROM HP CD-Writer cd12d LKS2 PQ: 0 ANSI: 5 [ 41.657274] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 41.657281] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 41.657479] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 41.657503] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f900 [ 41.657606] usb usb1: configuration #1 chosen from 1 choice [ 41.657631] hub 1-0:1.0: USB hub found [ 41.657636] hub 1-0:1.0: 2 ports detected [ 41.757857] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22 [ 41.757864] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 41.757878] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 41.757897] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f800 [ 41.757965] usb usb2: configuration #1 chosen from 1 choice [ 41.757980] hub 2-0:1.0: USB hub found [ 41.757982] hub 2-0:1.0: 2 ports detected [ 41.865593] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 41.865600] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 41.865612] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 41.865629] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700 [ 41.865692] usb usb3: configuration #1 chosen from 1 choice [ 41.865705] hub 3-0:1.0: USB hub found [ 41.865708] hub 3-0:1.0: 2 ports detected [ 41.966333] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 41.966340] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 41.966354] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 41.966376] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f600 [ 41.966444] usb usb4: configuration #1 chosen from 1 choice [ 41.966459] hub 4-0:1.0: USB hub found [ 41.966462] hub 4-0:1.0: 2 ports detected [ 41.997267] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 42.070056] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 42.070463] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 42.070538] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 42.070575] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffff000 [ 42.126014] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 42.126108] usb usb5: configuration #1 chosen from 1 choice [ 42.126125] hub 5-0:1.0: USB hub found [ 42.126131] hub 5-0:1.0: 8 ports detected [ 42.228887] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 42.229413] eth0: VIA Rhine II at 0xdfffe000, 00:16:17:d6:e6:06, IRQ 23. [ 42.230122] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. [ 42.235695] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 42.235700] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 42.240790] Driver 'sd' needs updating - please use bus_type methods [ 42.240876] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 42.240885] sd 0:0:0:0: [sda] Write Protect is off [ 42.240886] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.240898] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.240933] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 42.240939] sd 0:0:0:0: [sda] Write Protect is off [ 42.240941] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.240949] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.240952] sda: sda1 [ 42.249673] sd 0:0:0:0: [sda] Attached SCSI disk [ 42.249735] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 42.249743] sd 1:0:0:0: [sdb] Write Protect is off [ 42.249745] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 42.249756] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.249786] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 42.249792] sd 1:0:0:0: [sdb] Write Protect is off [ 42.249793] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 42.249802] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.249805] sdb:<4>Driver 'sr' needs updating - please use bus_type methods [ 42.268465] sdb1 sdb2 < sdb5 > [ 42.288348] sd 1:0:0:0: [sdb] Attached SCSI disk [ 42.288393] sd 2:0:0:0: [sdc] 78165360 512-byte hardware sectors (40021 MB) [ 42.288401] sd 2:0:0:0: [sdc] Write Protect is off [ 42.288403] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 42.288415] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.288446] sd 2:0:0:0: [sdc] 78165360 512-byte hardware sectors (40021 MB) [ 42.288452] sd 2:0:0:0: [sdc] Write Protect is off [ 42.288454] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 42.288472] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.288474] sdc: sdc1 [ 42.292809] sd 2:0:0:0: [sdc] Attached SCSI disk [ 42.296402] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 42.296419] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 42.296432] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 42.296444] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 42.296457] scsi 3:0:1:0: Attached scsi generic sg4 type 5 [ 42.301645] sr0: scsi3-mmc drive: 62x/125x writer cd/rw xa/form2 cdda tray [ 42.301650] Uniform CD-ROM driver Revision: 3.20 [ 42.301691] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 42.308976] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 42.309026] sr 3:0:1:0: Attached scsi CD-ROM sr1 [ 42.481909] Attempting manual resume [ 42.481912] swsusp: Resume From Partition 8:21 [ 42.481914] PM: Checking swsusp image. [ 42.482054] PM: Resume from disk failed. [ 42.495765] EXT3-fs: INFO: recovery required on readonly filesystem. [ 42.495768] EXT3-fs: write access will be enabled during recovery. [ 42.529418] usb 1-1: device not accepting address 2, error -71 [ 44.141844] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 44.319204] usb 1-1: configuration #1 chosen from 1 choice [ 44.559918] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 44.728879] usb 3-1: configuration #1 chosen from 1 choice [ 44.731825] hub 3-1:1.0: USB hub found [ 44.733809] hub 3-1:1.0: 4 ports detected [ 45.040506] usb 3-1.1: new full speed USB device using uhci_hcd and address 3 [ 45.145971] usb 3-1.1: configuration #1 chosen from 1 choice [ 45.351462] usb 3-1.4: new low speed USB device using uhci_hcd and address 4 [ 45.492227] usb 3-1.4: configuration #1 chosen from 1 choice [ 45.496825] usbcore: registered new interface driver hiddev [ 45.510710] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input1 [ 45.526779] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-1 [ 45.556716] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.1/input/input2 [ 45.582652] input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1 [ 45.586989] input: HID 19fa:8d91 as /devices/pci0000:00/0000:00:10.2/usb3/3-1/3-1.1/3-1.1:1.0/input/input3 [ 45.587001] input,hidraw2: USB HID v1.10 Joystick [HID 19fa:8d91] on usb-0000:00:10.2-1.1 [ 45.590975] input: HID 19fa:8d91 as /devices/pci0000:00/0000:00:10.2/usb3/3-1/3-1.1/3-1.1:1.1/input/input4 [ 45.590986] input,hidraw3: USB HID v1.10 Joystick [HID 19fa:8d91] on usb-0000:00:10.2-1.1 [ 45.619913] input: Logitech Logitech Dual Action as /devices/pci0000:00/0000:00:10.2/usb3/3-1/3-1.4/3-1.4:1.0/input/input5 [ 45.619924] input,hidraw4: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:00:10.2-1.4 [ 45.619934] usbcore: registered new interface driver usbhid [ 45.619937] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 48.609526] kjournald starting. Commit interval 5 seconds [ 48.609541] EXT3-fs: sdb1: orphan cleanup on readonly fs [ 48.609547] ext3_orphan_cleanup: deleting unreferenced inode 11911349 [ 48.629988] ext3_orphan_cleanup: deleting unreferenced inode 11911347 [ 48.636905] EXT3-fs: sdb1: 2 orphan inodes deleted [ 48.636906] EXT3-fs: recovery complete. [ 48.647382] EXT3-fs: mounted filesystem with ordered data mode. [ 54.683983] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 54.802671] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 54.866125] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 54.942082] parport_pc 00:0a: reported by Plug and Play ACPI [ 54.942132] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 54.983470] input: Power Button (FF) as /devices/virtual/input/input7 [ 55.037634] ACPI: Power Button (FF) [PWRF] [ 55.037683] input: Power Button (CM) as /devices/virtual/input/input8 [ 55.097485] ACPI: Power Button (CM) [PWRB] [ 55.514145] nvidia: module license 'NVIDIA' taints kernel. [ 55.775251] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24 [ 55.775260] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 55.775397] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 [ 56.009179] ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 56.837035] lp0: using parport0 (interrupt-driven). [ 56.918605] Adding 6040400k swap on /dev/sdb5. Priority:-1 extents:1 across:6040400k [ 57.528730] EXT3 FS on sdb1, internal journal [ 57.629194] device-mapper: uevent: version 1.0.3 [ 57.629219] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] [ 59.115466] ip_tables: (C) 2000-2006 Netfilter Core Team [ 62.430760] cdrom: This disc doesn't have any tracks I recognize! [ 62.457647] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 65.791824] NET: Registered protocol family 17 [ 70.034772] NET: Registered protocol family 10 [ 70.034942] lo: Disabled Privacy Extensions [ 80.017501] eth0: no IPv6 routers present [ 101.010855] cdrom: This disc doesn't have any tracks I recognize! -- Copying A Large Amount Of Files VIA Samba Disables CD-Rom Drives https://bugs.launchpad.net/bugs/202951 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
