Nicola, if u dont mind, can you please check what version of kernel are you on....it should be listed in your system monitor first tab
Thanks Suhail "When love, skill and work come together, expect a masterpiece." On Wed, Mar 19, 2008 at 6:23 PM, Nicola Gallo <[EMAIL PROTECTED]> wrote: > same problem for me after today's update. I don't remember what packages i > updated, but the wireless card is not anymore present in the network GI. > Same wireless card, dell xps m1330, ubuntu herdy > > -- > [Hardy] Wirelss is not working > https://bugs.launchpad.net/bugs/202455 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in Auto-NDISwrapper: Linux Wi-Fi as easy as it can get: New > Status in Ubuntu: New > > Bug description: > Hi, > > I am using a dell 640 m machine and wireless is not working after updating > to hardy. > > Please see attached logs and files for your refference. > > Thanks > > dmesg | grep wireless > [ 89.977193] Kill switch must be turned off for wireless networking to > work. > [ 90.192946] Kill switch must be turned off for wireless networking to > work. > > lspci | grep Wireless > 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network > Connection (rev 02) > > uname -a > Linux suhail-laptop 2.6.24-12-generic #1 SMP Wed Mar 12 22:31:43 UTC 2008 > x86_64 GNU/Linux > > =============================================================== > lspci-vvnn.log > =============================================================== > > 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, > 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 0 > Capabilities: [e0] Vendor Specific Information > > 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile > 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] > (rev 03) (prog-if 00 [VGA controller]) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=512K] > Region 1: I/O ports at eff8 [size=8] > Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] > Region 3: Memory at efec0000 (32-bit, non-prefetchable) [size=256K] > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, > 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Region 0: Memory at eff80000 (32-bit, non-prefetchable) [size=512K] > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High > Definition Audio Controller [8086:27d8] (rev 01) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 21 > Region 0: Memory at efebc000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express Unknown type IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed unknown, Width x0, ASPM unknown, Port > 0 > Link: Latency L0s <64ns, L1 <1us > Link: ASPM Disabled CommClk- ExtSynch- > Link: Speed unknown, Width x0 > > 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI > Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s unlimited, L1 unlimited > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port > 1 > Link: Latency L0s <1us, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x0 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ > Surpise+ > Slot: Number 2, PowerLimit 6.500000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- > Slot: AttnInd Unknown, PwrInd Unknown, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable+ > Address: fee0300c Data: 4161 > Capabilities: [90] Subsystem: Dell Unknown device [1028:01d8] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI > Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 > Memory behind bridge: efd00000-efdfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s unlimited, L1 unlimited > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port > 2 > Link: Latency L0s <256ns, L1 <4us > Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ > Surpise+ > Slot: Number 3, PowerLimit 6.500000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- > Slot: AttnInd Unknown, PwrInd Unknown, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable+ > Address: fee0300c Data: 4169 > Capabilities: [90] Subsystem: Dell Unknown device [1028:01d8] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI > Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: efa00000-efcfffff > Prefetchable memory behind bridge: > 00000000e0000000-00000000e01fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s unlimited, L1 unlimited > Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port > 4 > Link: Latency L0s <1us, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x0 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ > Surpise+ > Slot: Number 5, PowerLimit 6.500000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- > Slot: AttnInd Unknown, PwrInd Unknown, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable+ > Address: fee0300c Data: 4171 > Capabilities: [90] Subsystem: Dell Unknown device [1028:01d8] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 20 > Region 4: I/O ports at bf80 [size=32] > > 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 21 > Region 4: I/O ports at bf60 [size=32] > > 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 22 > Region 4: I/O ports at bf40 [size=32] > > 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB > UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin D routed to IRQ 23 > Region 4: I/O ports at bf20 [size=32] > > 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 > EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port > > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge > [8086:2448] (rev e1) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 > Memory behind bridge: ef900000-ef9fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- > Capabilities: [50] Subsystem: Dell Unknown device [1028:01d8] > > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC > Interface Bridge [8086:27b9] (rev 01) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [e0] Vendor Specific Information > > 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) > SATA IDE Controller [8086:27c4] (rev 01) (prog-if 80 [Master]) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 17 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at bfa0 [size=16] > Capabilities: [70] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus > Controller [8086:27da] (rev 01) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin B routed to IRQ 4 > Region 4: I/O ports at 10c0 [size=32] > > 02:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 > 100Base-TX [14e4:170c] (rev 02) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 02:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 > Controller [1180:0832] (prog-if 10 [OHCI]) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (500ns min, 1000ns max) > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME+ > > 02:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 > SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) (prog-if 01) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Interrupt: pin B routed to IRQ 18 > Region 0: Memory at ef9fd400 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 02:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller > [1180:0843] (rev 0a) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin B routed to IRQ 11 > Region 0: Memory at ef9fd500 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 02:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus > Host Adapter [1180:0592] (rev 05) > Subsystem: Dell Unknown device [1028:01d8] > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin B routed to IRQ 11 > Region 0: Memory at ef9fd600 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 02:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller > [1180:0852] (rev ff) (prog-if ff) > !!! Unknown header type 7f > > 0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG > Network Connection [8086:4222] (rev 02) > Subsystem: Intel Corporation Unknown device [8086:1021] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 508 > Region 0: Memory at efdff000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [c8] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 Enable+ > Address: 00000000fee0300c Data: 41a1 > Capabilities: [e0] Express Legacy Endpoint IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s <512ns, L1 unlimited > Device: AtnBtn- AtnInd- PwrInd- > Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port > 0 > Link: Latency L0s <128ns, L1 <64us > Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > -- [Hardy] Wirelss is not working https://bugs.launchpad.net/bugs/202455 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
