Public bug reported: Binary package hint: displayconfig-gtk
screen and graphics changes are working but not saving. I have a dell precision m70 with 1900*1200 resolution. This is in hardy beta. i used envyng to install the nvidia as it was not installed by default. ref bug https://bugs.launchpad.net/ubuntu/+source/linux-restricted- modules-2.6.24/+bug/205676 the resolution every time i log in is lower than the max resolution. i then have to change it and all is fine. it never saves. [EMAIL PROTECTED]:~$ sudo get-edid|parse-edid get-edid: get-edid version 1.4.1 Performing real mode VBE call Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0 Function supported Call successful VBE version 300 VBE string at 0x11110 "NVIDIA" VBE/DDC service about to be called Report DDC capabilities Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0 Function supported Call successful Monitor and video card combination does not support DDC1 transfers Monitor and video card combination does not support DDC2 transfers 0 seconds per 128 byte EDID block transfer Screen is not blanked during DDC transfer Reading next EDID block VBE/DDC service about to be called Read EDID Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0 Function supported Call failed The EDID data should not be trusted as the VBE call failed Error: output block unchanged parse-edid: IO error reading EDID ** Affects: displayconfig-gtk (Ubuntu) Importance: Undecided Status: New -- screen and graphics settings not saving https://bugs.launchpad.net/bugs/205961 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
